diff options
Diffstat (limited to 'doc/manual')
29 files changed, 421 insertions, 800 deletions
diff --git a/doc/manual/local.mk b/doc/manual/local.mk index 371ed6f21..02a88e4fb 100644 --- a/doc/manual/local.mk +++ b/doc/manual/local.mk @@ -61,10 +61,10 @@ $(d)/conf-file.json: $(bindir)/nix $(trace-gen) $(dummy-env) $(bindir)/nix show-config --json --experimental-features nix-command > $@.tmp @mv $@.tmp $@ -$(d)/src/expressions/builtins.md: $(d)/builtins.json $(d)/generate-builtins.nix $(d)/src/expressions/builtins-prefix.md $(bindir)/nix - @cat doc/manual/src/expressions/builtins-prefix.md > $@.tmp +$(d)/src/language/builtins.md: $(d)/builtins.json $(d)/generate-builtins.nix $(d)/src/language/builtins-prefix.md $(bindir)/nix + @cat doc/manual/src/language/builtins-prefix.md > $@.tmp $(trace-gen) $(nix-eval) --expr 'import doc/manual/generate-builtins.nix (builtins.fromJSON (builtins.readFile $<))' >> $@.tmp - @cat doc/manual/src/expressions/builtins-suffix.md >> $@.tmp + @cat doc/manual/src/language/builtins-suffix.md >> $@.tmp @mv $@.tmp $@ $(d)/builtins.json: $(bindir)/nix @@ -97,7 +97,7 @@ doc/manual/generated/man1/nix3-manpages: $(d)/src/command-ref/new-cli done @touch $@ -$(docdir)/manual/index.html: $(MANUAL_SRCS) $(d)/book.toml $(d)/anchors.jq $(d)/custom.css $(d)/src/SUMMARY.md $(d)/src/command-ref/new-cli $(d)/src/command-ref/conf-file.md $(d)/src/expressions/builtins.md $(call rwildcard, $(d)/src, *.md) +$(docdir)/manual/index.html: $(MANUAL_SRCS) $(d)/book.toml $(d)/anchors.jq $(d)/custom.css $(d)/src/SUMMARY.md $(d)/src/command-ref/new-cli $(d)/src/command-ref/conf-file.md $(d)/src/language/builtins.md $(call rwildcard, $(d)/src, *.md) $(trace-gen) RUST_LOG=warn mdbook build doc/manual -d $(DESTDIR)$(docdir)/manual endif diff --git a/doc/manual/redirects.js b/doc/manual/redirects.js index 19f928c7e..167e221b8 100644 --- a/doc/manual/redirects.js +++ b/doc/manual/redirects.js @@ -132,113 +132,106 @@ var redirects = { "#sec-common-options": "command-ref/opt-common.html", "#ch-utilities": "command-ref/utilities.html", "#chap-hacking": "contributing/hacking.html", - "#adv-attr-allowSubstitutes": "expressions/advanced-attributes.html#adv-attr-allowSubstitutes", - "#adv-attr-allowedReferences": "expressions/advanced-attributes.html#adv-attr-allowedReferences", - "#adv-attr-allowedRequisites": "expressions/advanced-attributes.html#adv-attr-allowedRequisites", - "#adv-attr-disallowedReferences": "expressions/advanced-attributes.html#adv-attr-disallowedReferences", - "#adv-attr-disallowedRequisites": "expressions/advanced-attributes.html#adv-attr-disallowedRequisites", - "#adv-attr-exportReferencesGraph": "expressions/advanced-attributes.html#adv-attr-exportReferencesGraph", - "#adv-attr-impureEnvVars": "expressions/advanced-attributes.html#adv-attr-impureEnvVars", - "#adv-attr-outputHash": "expressions/advanced-attributes.html#adv-attr-outputHash", - "#adv-attr-outputHashAlgo": "expressions/advanced-attributes.html#adv-attr-outputHashAlgo", - "#adv-attr-outputHashMode": "expressions/advanced-attributes.html#adv-attr-outputHashMode", - "#adv-attr-passAsFile": "expressions/advanced-attributes.html#adv-attr-passAsFile", - "#adv-attr-preferLocalBuild": "expressions/advanced-attributes.html#adv-attr-preferLocalBuild", - "#fixed-output-drvs": "expressions/advanced-attributes.html#adv-attr-outputHash", - "#sec-advanced-attributes": "expressions/advanced-attributes.html", - "#sec-arguments": "expressions/arguments-variables.html", - "#sec-build-script": "expressions/build-script.html", - "#builtin-abort": "expressions/builtins.html#builtins-abort", - "#builtin-add": "expressions/builtins.html#builtins-add", - "#builtin-all": "expressions/builtins.html#builtins-all", - "#builtin-any": "expressions/builtins.html#builtins-any", - "#builtin-attrNames": "expressions/builtins.html#builtins-attrNames", - "#builtin-attrValues": "expressions/builtins.html#builtins-attrValues", - "#builtin-baseNameOf": "expressions/builtins.html#builtins-baseNameOf", - "#builtin-bitAnd": "expressions/builtins.html#builtins-bitAnd", - "#builtin-bitOr": "expressions/builtins.html#builtins-bitOr", - "#builtin-bitXor": "expressions/builtins.html#builtins-bitXor", - "#builtin-builtins": "expressions/builtins.html#builtins-builtins", - "#builtin-compareVersions": "expressions/builtins.html#builtins-compareVersions", - "#builtin-concatLists": "expressions/builtins.html#builtins-concatLists", - "#builtin-concatStringsSep": "expressions/builtins.html#builtins-concatStringsSep", - "#builtin-currentSystem": "expressions/builtins.html#builtins-currentSystem", - "#builtin-deepSeq": "expressions/builtins.html#builtins-deepSeq", - "#builtin-derivation": "expressions/builtins.html#builtins-derivation", - "#builtin-dirOf": "expressions/builtins.html#builtins-dirOf", - "#builtin-div": "expressions/builtins.html#builtins-div", - "#builtin-elem": "expressions/builtins.html#builtins-elem", - "#builtin-elemAt": "expressions/builtins.html#builtins-elemAt", - "#builtin-fetchGit": "expressions/builtins.html#builtins-fetchGit", - "#builtin-fetchTarball": "expressions/builtins.html#builtins-fetchTarball", - "#builtin-fetchurl": "expressions/builtins.html#builtins-fetchurl", - "#builtin-filterSource": "expressions/builtins.html#builtins-filterSource", - "#builtin-foldl-prime": "expressions/builtins.html#builtins-foldl-prime", - "#builtin-fromJSON": "expressions/builtins.html#builtins-fromJSON", - "#builtin-functionArgs": "expressions/builtins.html#builtins-functionArgs", - "#builtin-genList": "expressions/builtins.html#builtins-genList", - "#builtin-getAttr": "expressions/builtins.html#builtins-getAttr", - "#builtin-getEnv": "expressions/builtins.html#builtins-getEnv", - "#builtin-hasAttr": "expressions/builtins.html#builtins-hasAttr", - "#builtin-hashFile": "expressions/builtins.html#builtins-hashFile", - "#builtin-hashString": "expressions/builtins.html#builtins-hashString", - "#builtin-head": "expressions/builtins.html#builtins-head", - "#builtin-import": "expressions/builtins.html#builtins-import", - "#builtin-intersectAttrs": "expressions/builtins.html#builtins-intersectAttrs", - "#builtin-isAttrs": "expressions/builtins.html#builtins-isAttrs", - "#builtin-isBool": "expressions/builtins.html#builtins-isBool", - "#builtin-isFloat": "expressions/builtins.html#builtins-isFloat", - "#builtin-isFunction": "expressions/builtins.html#builtins-isFunction", - "#builtin-isInt": "expressions/builtins.html#builtins-isInt", - "#builtin-isList": "expressions/builtins.html#builtins-isList", - "#builtin-isNull": "expressions/builtins.html#builtins-isNull", - "#builtin-isString": "expressions/builtins.html#builtins-isString", - "#builtin-length": "expressions/builtins.html#builtins-length", - "#builtin-lessThan": "expressions/builtins.html#builtins-lessThan", - "#builtin-listToAttrs": "expressions/builtins.html#builtins-listToAttrs", - "#builtin-map": "expressions/builtins.html#builtins-map", - "#builtin-match": "expressions/builtins.html#builtins-match", - "#builtin-mul": "expressions/builtins.html#builtins-mul", - "#builtin-parseDrvName": "expressions/builtins.html#builtins-parseDrvName", - "#builtin-path": "expressions/builtins.html#builtins-path", - "#builtin-pathExists": "expressions/builtins.html#builtins-pathExists", - "#builtin-placeholder": "expressions/builtins.html#builtins-placeholder", - "#builtin-readDir": "expressions/builtins.html#builtins-readDir", - "#builtin-readFile": "expressions/builtins.html#builtins-readFile", - "#builtin-removeAttrs": "expressions/builtins.html#builtins-removeAttrs", - "#builtin-replaceStrings": "expressions/builtins.html#builtins-replaceStrings", - "#builtin-seq": "expressions/builtins.html#builtins-seq", - "#builtin-sort": "expressions/builtins.html#builtins-sort", - "#builtin-split": "expressions/builtins.html#builtins-split", - "#builtin-splitVersion": "expressions/builtins.html#builtins-splitVersion", - "#builtin-stringLength": "expressions/builtins.html#builtins-stringLength", - "#builtin-sub": "expressions/builtins.html#builtins-sub", - "#builtin-substring": "expressions/builtins.html#builtins-substring", - "#builtin-tail": "expressions/builtins.html#builtins-tail", - "#builtin-throw": "expressions/builtins.html#builtins-throw", - "#builtin-toFile": "expressions/builtins.html#builtins-toFile", - "#builtin-toJSON": "expressions/builtins.html#builtins-toJSON", - "#builtin-toPath": "expressions/builtins.html#builtins-toPath", - "#builtin-toString": "expressions/builtins.html#builtins-toString", - "#builtin-toXML": "expressions/builtins.html#builtins-toXML", - "#builtin-trace": "expressions/builtins.html#builtins-trace", - "#builtin-tryEval": "expressions/builtins.html#builtins-tryEval", - "#builtin-typeOf": "expressions/builtins.html#builtins-typeOf", - "#ssec-builtins": "expressions/builtins.html", - "#attr-system": "expressions/derivations.html#attr-system", - "#ssec-derivation": "expressions/derivations.html", - "#ch-expression-language": "expressions/expression-language.html", - "#sec-expression-syntax": "expressions/expression-syntax.html", - "#sec-generic-builder": "expressions/generic-builder.html", - "#sec-constructs": "expressions/language-constructs.html", - "#sect-let-expressions": "expressions/language-constructs.html#let-expressions", - "#ss-functions": "expressions/language-constructs.html#functions", - "#sec-language-operators": "expressions/language-operators.html", - "#table-operators": "expressions/language-operators.html", - "#ssec-values": "expressions/language-values.html", - "#sec-building-simple": "expressions/simple-building-testing.html", - "#ch-simple-expression": "expressions/simple-expression.html", - "#chap-writing-nix-expressions": "expressions/writing-nix-expressions.html", + "#adv-attr-allowSubstitutes": "language/advanced-attributes.html#adv-attr-allowSubstitutes", + "#adv-attr-allowedReferences": "language/advanced-attributes.html#adv-attr-allowedReferences", + "#adv-attr-allowedRequisites": "language/advanced-attributes.html#adv-attr-allowedRequisites", + "#adv-attr-disallowedReferences": "language/advanced-attributes.html#adv-attr-disallowedReferences", + "#adv-attr-disallowedRequisites": "language/advanced-attributes.html#adv-attr-disallowedRequisites", + "#adv-attr-exportReferencesGraph": "language/advanced-attributes.html#adv-attr-exportReferencesGraph", + "#adv-attr-impureEnvVars": "language/advanced-attributes.html#adv-attr-impureEnvVars", + "#adv-attr-outputHash": "language/advanced-attributes.html#adv-attr-outputHash", + "#adv-attr-outputHashAlgo": "language/advanced-attributes.html#adv-attr-outputHashAlgo", + "#adv-attr-outputHashMode": "language/advanced-attributes.html#adv-attr-outputHashMode", + "#adv-attr-passAsFile": "language/advanced-attributes.html#adv-attr-passAsFile", + "#adv-attr-preferLocalBuild": "language/advanced-attributes.html#adv-attr-preferLocalBuild", + "#fixed-output-drvs": "language/advanced-attributes.html#adv-attr-outputHash", + "#sec-advanced-attributes": "language/advanced-attributes.html", + "#builtin-abort": "language/builtins.html#builtins-abort", + "#builtin-add": "language/builtins.html#builtins-add", + "#builtin-all": "language/builtins.html#builtins-all", + "#builtin-any": "language/builtins.html#builtins-any", + "#builtin-attrNames": "language/builtins.html#builtins-attrNames", + "#builtin-attrValues": "language/builtins.html#builtins-attrValues", + "#builtin-baseNameOf": "language/builtins.html#builtins-baseNameOf", + "#builtin-bitAnd": "language/builtins.html#builtins-bitAnd", + "#builtin-bitOr": "language/builtins.html#builtins-bitOr", + "#builtin-bitXor": "language/builtins.html#builtins-bitXor", + "#builtin-builtins": "language/builtins.html#builtins-builtins", + "#builtin-compareVersions": "language/builtins.html#builtins-compareVersions", + "#builtin-concatLists": "language/builtins.html#builtins-concatLists", + "#builtin-concatStringsSep": "language/builtins.html#builtins-concatStringsSep", + "#builtin-currentSystem": "language/builtins.html#builtins-currentSystem", + "#builtin-deepSeq": "language/builtins.html#builtins-deepSeq", + "#builtin-derivation": "language/builtins.html#builtins-derivation", + "#builtin-dirOf": "language/builtins.html#builtins-dirOf", + "#builtin-div": "language/builtins.html#builtins-div", + "#builtin-elem": "language/builtins.html#builtins-elem", + "#builtin-elemAt": "language/builtins.html#builtins-elemAt", + "#builtin-fetchGit": "language/builtins.html#builtins-fetchGit", + "#builtin-fetchTarball": "language/builtins.html#builtins-fetchTarball", + "#builtin-fetchurl": "language/builtins.html#builtins-fetchurl", + "#builtin-filterSource": "language/builtins.html#builtins-filterSource", + "#builtin-foldl-prime": "language/builtins.html#builtins-foldl-prime", + "#builtin-fromJSON": "language/builtins.html#builtins-fromJSON", + "#builtin-functionArgs": "language/builtins.html#builtins-functionArgs", + "#builtin-genList": "language/builtins.html#builtins-genList", + "#builtin-getAttr": "language/builtins.html#builtins-getAttr", + "#builtin-getEnv": "language/builtins.html#builtins-getEnv", + "#builtin-hasAttr": "language/builtins.html#builtins-hasAttr", + "#builtin-hashFile": "language/builtins.html#builtins-hashFile", + "#builtin-hashString": "language/builtins.html#builtins-hashString", + "#builtin-head": "language/builtins.html#builtins-head", + "#builtin-import": "language/builtins.html#builtins-import", + "#builtin-intersectAttrs": "language/builtins.html#builtins-intersectAttrs", + "#builtin-isAttrs": "language/builtins.html#builtins-isAttrs", + "#builtin-isBool": "language/builtins.html#builtins-isBool", + "#builtin-isFloat": "language/builtins.html#builtins-isFloat", + "#builtin-isFunction": "language/builtins.html#builtins-isFunction", + "#builtin-isInt": "language/builtins.html#builtins-isInt", + "#builtin-isList": "language/builtins.html#builtins-isList", + "#builtin-isNull": "language/builtins.html#builtins-isNull", + "#builtin-isString": "language/builtins.html#builtins-isString", + "#builtin-length": "language/builtins.html#builtins-length", + "#builtin-lessThan": "language/builtins.html#builtins-lessThan", + "#builtin-listToAttrs": "language/builtins.html#builtins-listToAttrs", + "#builtin-map": "language/builtins.html#builtins-map", + "#builtin-match": "language/builtins.html#builtins-match", + "#builtin-mul": "language/builtins.html#builtins-mul", + "#builtin-parseDrvName": "language/builtins.html#builtins-parseDrvName", + "#builtin-path": "language/builtins.html#builtins-path", + "#builtin-pathExists": "language/builtins.html#builtins-pathExists", + "#builtin-placeholder": "language/builtins.html#builtins-placeholder", + "#builtin-readDir": "language/builtins.html#builtins-readDir", + "#builtin-readFile": "language/builtins.html#builtins-readFile", + "#builtin-removeAttrs": "language/builtins.html#builtins-removeAttrs", + "#builtin-replaceStrings": "language/builtins.html#builtins-replaceStrings", + "#builtin-seq": "language/builtins.html#builtins-seq", + "#builtin-sort": "language/builtins.html#builtins-sort", + "#builtin-split": "language/builtins.html#builtins-split", + "#builtin-splitVersion": "language/builtins.html#builtins-splitVersion", + "#builtin-stringLength": "language/builtins.html#builtins-stringLength", + "#builtin-sub": "language/builtins.html#builtins-sub", + "#builtin-substring": "language/builtins.html#builtins-substring", + "#builtin-tail": "language/builtins.html#builtins-tail", + "#builtin-throw": "language/builtins.html#builtins-throw", + "#builtin-toFile": "language/builtins.html#builtins-toFile", + "#builtin-toJSON": "language/builtins.html#builtins-toJSON", + "#builtin-toPath": "language/builtins.html#builtins-toPath", + "#builtin-toString": "language/builtins.html#builtins-toString", + "#builtin-toXML": "language/builtins.html#builtins-toXML", + "#builtin-trace": "language/builtins.html#builtins-trace", + "#builtin-tryEval": "language/builtins.html#builtins-tryEval", + "#builtin-typeOf": "language/builtins.html#builtins-typeOf", + "#ssec-builtins": "language/builtins.html", + "#attr-system": "language/derivations.html#attr-system", + "#ssec-derivation": "language/derivations.html", + "#ch-expression-language": "language/index.html", + "#sec-constructs": "language/constructs.html", + "#sect-let-language": "language/constructs.html#let-language", + "#ss-functions": "language/constructs.html#functions", + "#sec-language-operators": "language/operators.html", + "#table-operators": "language/operators.html", + "#ssec-values": "language/values.html", "#gloss-closure": "glossary.html#gloss-closure", "#gloss-derivation": "glossary.html#gloss-derivation", "#gloss-deriver": "glossary.html#gloss-deriver", diff --git a/doc/manual/src/SUMMARY.md.in b/doc/manual/src/SUMMARY.md.in index 825a8b4c0..084c8f442 100644 --- a/doc/manual/src/SUMMARY.md.in +++ b/doc/manual/src/SUMMARY.md.in @@ -26,21 +26,14 @@ - [Copying Closures via SSH](package-management/copy-closure.md) - [Serving a Nix store via SSH](package-management/ssh-substituter.md) - [Serving a Nix store via S3](package-management/s3-substituter.md) -- [Writing Nix Expressions](expressions/writing-nix-expressions.md) - - [A Simple Nix Expression](expressions/simple-expression.md) - - [Expression Syntax](expressions/expression-syntax.md) - - [Build Script](expressions/build-script.md) - - [Arguments and Variables](expressions/arguments-variables.md) - - [Building and Testing](expressions/simple-building-testing.md) - - [Generic Builder Syntax](expressions/generic-builder.md) - - [Writing Nix Expressions](expressions/expression-language.md) - - [Values](expressions/language-values.md) - - [Language Constructs](expressions/language-constructs.md) - - [Operators](expressions/language-operators.md) - - [Derivations](expressions/derivations.md) - - [Advanced Attributes](expressions/advanced-attributes.md) - - [Built-in Constants](expressions/builtin-constants.md) - - [Built-in Functions](expressions/builtins.md) +- [Nix Language](language/index.md) + - [Data Types](language/values.md) + - [Language Constructs](language/constructs.md) + - [Operators](language/operators.md) + - [Derivations](language/derivations.md) + - [Advanced Attributes](language/advanced-attributes.md) + - [Built-in Constants](language/builtin-constants.md) + - [Built-in Functions](language/builtins.md) - [Advanced Topics](advanced-topics/advanced-topics.md) - [Remote Builds](advanced-topics/distributed-builds.md) - [Tuning Cores and Jobs](advanced-topics/cores-vs-jobs.md) @@ -72,6 +65,7 @@ - [CLI guideline](contributing/cli-guideline.md) - [Release Notes](release-notes/release-notes.md) - [Release X.Y (202?-??-??)](release-notes/rl-next.md) + - [Release 2.10 (2022-07-11)](release-notes/rl-2.10.md) - [Release 2.9 (2022-05-30)](release-notes/rl-2.9.md) - [Release 2.8 (2022-04-19)](release-notes/rl-2.8.md) - [Release 2.7 (2022-03-07)](release-notes/rl-2.7.md) diff --git a/doc/manual/src/advanced-topics/distributed-builds.md b/doc/manual/src/advanced-topics/distributed-builds.md index b0d7fbf1a..fefd10100 100644 --- a/doc/manual/src/advanced-topics/distributed-builds.md +++ b/doc/manual/src/advanced-topics/distributed-builds.md @@ -12,14 +12,14 @@ machine is accessible via SSH and that it has Nix installed. You can test whether connecting to the remote Nix instance works, e.g. ```console -$ nix ping-store --store ssh://mac +$ nix store ping --store ssh://mac ``` will try to connect to the machine named `mac`. It is possible to specify an SSH identity file as part of the remote store URI, e.g. ```console -$ nix ping-store --store ssh://mac?ssh-key=/home/alice/my-key +$ nix store ping --store ssh://mac?ssh-key=/home/alice/my-key ``` Since builds should be non-interactive, the key should not have a diff --git a/doc/manual/src/command-ref/nix-env.md b/doc/manual/src/command-ref/nix-env.md index 8d6abaf52..a5df35d77 100644 --- a/doc/manual/src/command-ref/nix-env.md +++ b/doc/manual/src/command-ref/nix-env.md @@ -31,7 +31,7 @@ subcommand to be performed. These are documented below. Several commands, such as `nix-env -q` and `nix-env -i`, take a list of arguments that specify the packages on which to operate. These are extended regular expressions that must match the entire name of the -package. (For details on regular expressions, see regex7.) The match is +package. (For details on regular expressions, see **regex**(7).) The match is case-sensitive. The regular expression can optionally be followed by a dash and a version number; if omitted, any version of the package will match. Here are some examples: @@ -198,7 +198,7 @@ a number of possible ways: another. - If `--from-expression` is given, *args* are Nix - [functions](../expressions/language-constructs.md#functions) + [functions](../language/constructs.md#functions) that are called with the active Nix expression as their single argument. The derivations returned by those function calls are installed. This allows derivations to be specified in an @@ -412,7 +412,7 @@ The upgrade operation determines whether a derivation `y` is an upgrade of a derivation `x` by looking at their respective `name` attributes. The names (e.g., `gcc-3.3.1` are split into two parts: the package name (`gcc`), and the version (`3.3.1`). The version part starts after the -first dash not followed by a letter. `x` is considered an upgrade of `y` +first dash not followed by a letter. `y` is considered an upgrade of `x` if their package names match, and the version of `y` is higher than that of `x`. diff --git a/doc/manual/src/command-ref/nix-instantiate.md b/doc/manual/src/command-ref/nix-instantiate.md index 2e198daed..8f143729e 100644 --- a/doc/manual/src/command-ref/nix-instantiate.md +++ b/doc/manual/src/command-ref/nix-instantiate.md @@ -51,7 +51,7 @@ standard input. - `--strict`\ When used with `--eval`, recursively evaluate list elements and attributes. Normally, such sub-expressions are left unevaluated - (since the Nix expression language is lazy). + (since the Nix language is lazy). > **Warning** > @@ -66,7 +66,7 @@ standard input. When used with `--eval`, print the resulting value as an XML representation of the abstract syntax tree rather than as an ATerm. The schema is the same as that used by the [`toXML` - built-in](../expressions/builtins.md). + built-in](../language/builtins.md). - `--read-write-mode`\ When used with `--eval`, perform evaluation in read/write mode so diff --git a/doc/manual/src/command-ref/nix-store.md b/doc/manual/src/command-ref/nix-store.md index dc8faba68..ecd838e8d 100644 --- a/doc/manual/src/command-ref/nix-store.md +++ b/doc/manual/src/command-ref/nix-store.md @@ -121,7 +121,7 @@ Special exit codes: - `102`\ Hash mismatch, the build output was rejected because it does not match the [`outputHash` attribute of the - derivation](../expressions/advanced-attributes.md). + derivation](../language/advanced-attributes.md). - `104`\ Not deterministic, the build succeeded in check mode but the diff --git a/doc/manual/src/command-ref/opt-common.md b/doc/manual/src/command-ref/opt-common.md index 51d7de18a..e612c416f 100644 --- a/doc/manual/src/command-ref/opt-common.md +++ b/doc/manual/src/command-ref/opt-common.md @@ -145,7 +145,7 @@ Most Nix commands accept the following command-line options: expression evaluator will automatically try to call functions that it encounters. It can automatically call functions for which every argument has a [default - value](../expressions/language-constructs.md#functions) (e.g., + value](../language/constructs.md#functions) (e.g., `{ argName ? defaultValue }: ...`). With `--arg`, you can also call functions that have arguments without a default value (or override a default value). That is, if the evaluator encounters a @@ -164,7 +164,7 @@ Most Nix commands accept the following command-line options: So if you call this Nix expression (e.g., when you do `nix-env -iA pkgname`), the function will be called automatically using the - value [`builtins.currentSystem`](../expressions/builtins.md) for + value [`builtins.currentSystem`](../language/builtins.md) for the `system` argument. You can override this using `--arg`, e.g., `nix-env -iA pkgname --arg system \"i686-freebsd\"`. (Note that since the argument is a Nix string literal, you have to escape the diff --git a/doc/manual/src/expressions/arguments-variables.md b/doc/manual/src/expressions/arguments-variables.md deleted file mode 100644 index 12198c879..000000000 --- a/doc/manual/src/expressions/arguments-variables.md +++ /dev/null @@ -1,80 +0,0 @@ -# Arguments and Variables - -The [Nix expression for GNU Hello](expression-syntax.md) is a -function; it is missing some arguments that have to be filled in -somewhere. In the Nix Packages collection this is done in the file -`pkgs/top-level/all-packages.nix`, where all Nix expressions for -packages are imported and called with the appropriate arguments. Here -are some fragments of `all-packages.nix`, with annotations of what -they mean: - -```nix -... - -rec { ① - - hello = import ../applications/misc/hello/ex-1 ② { ③ - inherit fetchurl stdenv perl; - }; - - perl = import ../development/interpreters/perl { ④ - inherit fetchurl stdenv; - }; - - fetchurl = import ../build-support/fetchurl { - inherit stdenv; ... - }; - - stdenv = ...; - -} -``` - -1. This file defines a set of attributes, all of which are concrete - derivations (i.e., not functions). In fact, we define a *mutually - recursive* set of attributes. That is, the attributes can refer to - each other. This is precisely what we want since we want to “plug” - the various packages into each other. - -2. Here we *import* the Nix expression for GNU Hello. The import - operation just loads and returns the specified Nix expression. In - fact, we could just have put the contents of the Nix expression - for GNU Hello in `all-packages.nix` at this point. That would be - completely equivalent, but it would make `all-packages.nix` rather - bulky. - - Note that we refer to `../applications/misc/hello/ex-1`, not - `../applications/misc/hello/ex-1/default.nix`. When you try to - import a directory, Nix automatically appends `/default.nix` to the - file name. - -3. This is where the actual composition takes place. Here we *call* the - function imported from `../applications/misc/hello/ex-1` with a set - containing the things that the function expects, namely `fetchurl`, - `stdenv`, and `perl`. We use inherit again to use the attributes - defined in the surrounding scope (we could also have written - `fetchurl = fetchurl;`, etc.). - - The result of this function call is an actual derivation that can be - built by Nix (since when we fill in the arguments of the function, - what we get is its body, which is the call to `stdenv.mkDerivation` - in the [Nix expression for GNU Hello](expression-syntax.md)). - - > **Note** - > - > Nixpkgs has a convenience function `callPackage` that imports and - > calls a function, filling in any missing arguments by passing the - > corresponding attribute from the Nixpkgs set, like this: - > - > ```nix - > hello = callPackage ../applications/misc/hello/ex-1 { }; - > ``` - > - > If necessary, you can set or override arguments: - > - > ```nix - > hello = callPackage ../applications/misc/hello/ex-1 { stdenv = myStdenv; }; - > ``` - -4. Likewise, we have to instantiate Perl, `fetchurl`, and the standard - environment. diff --git a/doc/manual/src/expressions/build-script.md b/doc/manual/src/expressions/build-script.md deleted file mode 100644 index b1eacae88..000000000 --- a/doc/manual/src/expressions/build-script.md +++ /dev/null @@ -1,70 +0,0 @@ -# Build Script - -Here is the builder referenced from Hello's Nix expression (stored in -`pkgs/applications/misc/hello/ex-1/builder.sh`): - -```bash -source $stdenv/setup ① - -PATH=$perl/bin:$PATH ② - -tar xvfz $src ③ -cd hello-* -./configure --prefix=$out ④ -make ⑤ -make install -``` - -The builder can actually be made a lot shorter by using the *generic -builder* functions provided by `stdenv`, but here we write out the build -steps to elucidate what a builder does. It performs the following steps: - -1. When Nix runs a builder, it initially completely clears the - environment (except for the attributes declared in the derivation). - This is done to prevent undeclared inputs from being used in the - build process. If for example the `PATH` contained `/usr/bin`, then - you might accidentally use `/usr/bin/gcc`. - - So the first step is to set up the environment. This is done by - calling the `setup` script of the standard environment. The - environment variable `stdenv` points to the location of the - standard environment being used. (It wasn't specified explicitly - as an attribute in Hello's Nix expression, but `mkDerivation` adds - it automatically.) - -2. Since Hello needs Perl, we have to make sure that Perl is in the - `PATH`. The `perl` environment variable points to the location of - the Perl package (since it was passed in as an attribute to the - derivation), so `$perl/bin` is the directory containing the Perl - interpreter. - -3. Now we have to unpack the sources. The `src` attribute was bound to - the result of fetching the Hello source tarball from the network, so - the `src` environment variable points to the location in the Nix - store to which the tarball was downloaded. After unpacking, we `cd` - to the resulting source directory. - - The whole build is performed in a temporary directory created in - `/tmp`, by the way. This directory is removed after the builder - finishes, so there is no need to clean up the sources afterwards. - Also, the temporary directory is always newly created, so you don't - have to worry about files from previous builds interfering with the - current build. - -4. GNU Hello is a typical Autoconf-based package, so we first have to - run its `configure` script. In Nix every package is stored in a - separate location in the Nix store, for instance - `/nix/store/9a54ba97fb71b65fda531012d0443ce2-hello-2.1.1`. Nix - computes this path by cryptographically hashing all attributes of - the derivation. The path is passed to the builder through the `out` - environment variable. So here we give `configure` the parameter - `--prefix=$out` to cause Hello to be installed in the expected - location. - -5. Finally we build Hello (`make`) and install it into the location - specified by `out` (`make install`). - -If you are wondering about the absence of error checking on the result -of various commands called in the builder: this is because the shell -script is evaluated with Bash's `-e` option, which causes the script to -be aborted if any command fails without an error check. diff --git a/doc/manual/src/expressions/expression-syntax.md b/doc/manual/src/expressions/expression-syntax.md deleted file mode 100644 index 6b93e692c..000000000 --- a/doc/manual/src/expressions/expression-syntax.md +++ /dev/null @@ -1,93 +0,0 @@ -# Expression Syntax - -Here is a Nix expression for GNU Hello: - -```nix -{ stdenv, fetchurl, perl }: ① - -stdenv.mkDerivation { ② - name = "hello-2.1.1"; ③ - builder = ./builder.sh; ④ - src = fetchurl { ⑤ - url = "ftp://ftp.nluug.nl/pub/gnu/hello/hello-2.1.1.tar.gz"; - sha256 = "1md7jsfd8pa45z73bz1kszpp01yw6x5ljkjk2hx7wl800any6465"; - }; - inherit perl; ⑥ -} -``` - -This file is actually already in the Nix Packages collection in -`pkgs/applications/misc/hello/ex-1/default.nix`. It is customary to -place each package in a separate directory and call the single Nix -expression in that directory `default.nix`. The file has the following -elements (referenced from the figure by number): - -1. This states that the expression is a *function* that expects to be - called with three arguments: `stdenv`, `fetchurl`, and `perl`. They - are needed to build Hello, but we don't know how to build them here; - that's why they are function arguments. `stdenv` is a package that - is used by almost all Nix Packages; it provides a - “standard” environment consisting of the things you would expect - in a basic Unix environment: a C/C++ compiler (GCC, to be precise), - the Bash shell, fundamental Unix tools such as `cp`, `grep`, `tar`, - etc. `fetchurl` is a function that downloads files. `perl` is the - Perl interpreter. - - Nix functions generally have the form `{ x, y, ..., z }: e` where - `x`, `y`, etc. are the names of the expected arguments, and where - *e* is the body of the function. So here, the entire remainder of - the file is the body of the function; when given the required - arguments, the body should describe how to build an instance of - the Hello package. - -2. So we have to build a package. Building something from other stuff - is called a *derivation* in Nix (as opposed to sources, which are - built by humans instead of computers). We perform a derivation by - calling `stdenv.mkDerivation`. `mkDerivation` is a function - provided by `stdenv` that builds a package from a set of - *attributes*. A set is just a list of key/value pairs where each - key is a string and each value is an arbitrary Nix - expression. They take the general form `{ name1 = expr1; ... - nameN = exprN; }`. - -3. The attribute `name` specifies the symbolic name and version of - the package. Nix doesn't really care about these things, but they - are used by for instance `nix-env -q` to show a “human-readable” - name for packages. This attribute is required by `mkDerivation`. - -4. The attribute `builder` specifies the builder. This attribute can - sometimes be omitted, in which case `mkDerivation` will fill in a - default builder (which does a `configure; make; make install`, in - essence). Hello is sufficiently simple that the default builder - would suffice, but in this case, we will show an actual builder - for educational purposes. The value `./builder.sh` refers to the - shell script shown in the [next section](build-script.md), - discussed below. - -5. The builder has to know what the sources of the package are. Here, - the attribute `src` is bound to the result of a call to the - `fetchurl` function. Given a URL and a SHA-256 hash of the expected - contents of the file at that URL, this function builds a derivation - that downloads the file and checks its hash. So the sources are a - dependency that like all other dependencies is built before Hello - itself is built. - - Instead of `src` any other name could have been used, and in fact - there can be any number of sources (bound to different attributes). - However, `src` is customary, and it's also expected by the default - builder (which we don't use in this example). - -6. Since the derivation requires Perl, we have to pass the value of the - `perl` function argument to the builder. All attributes in the set - are actually passed as environment variables to the builder, so - declaring an attribute - - ```nix - perl = perl; - ``` - - will do the trick: it binds an attribute `perl` to the function - argument which also happens to be called `perl`. However, it looks a - bit silly, so there is a shorter syntax. The `inherit` keyword - causes the specified attributes to be bound to whatever variables - with the same name happen to be in scope. diff --git a/doc/manual/src/expressions/generic-builder.md b/doc/manual/src/expressions/generic-builder.md deleted file mode 100644 index cf26b5f82..000000000 --- a/doc/manual/src/expressions/generic-builder.md +++ /dev/null @@ -1,66 +0,0 @@ -# Generic Builder Syntax - -Recall that the [build script for GNU Hello](build-script.md) looked -something like this: - -```bash -PATH=$perl/bin:$PATH -tar xvfz $src -cd hello-* -./configure --prefix=$out -make -make install -``` - -The builders for almost all Unix packages look like this — set up some -environment variables, unpack the sources, configure, build, and -install. For this reason the standard environment provides some Bash -functions that automate the build process. Here is what a builder using -the generic build facilities looks like: - -```bash -buildInputs="$perl" ① - -source $stdenv/setup ② - -genericBuild ③ -``` - -Here is what each line means: - -1. The `buildInputs` variable tells `setup` to use the indicated - packages as “inputs”. This means that if a package provides a `bin` - subdirectory, it's added to `PATH`; if it has a `include` - subdirectory, it's added to GCC's header search path; and so on. - (This is implemented in a modular way: `setup` tries to source the - file `pkg/nix-support/setup-hook` of all dependencies. These “setup - hooks” can then set up whatever environment variables they want; for - instance, the setup hook for Perl sets the `PERL5LIB` environment - variable to contain the `lib/site_perl` directories of all inputs.) - -2. The function `genericBuild` is defined in the file `$stdenv/setup`. - -3. The final step calls the shell function `genericBuild`, which - performs the steps that were done explicitly in the previous build - script. The generic builder is smart enough to figure out whether - to unpack the sources using `gzip`, `bzip2`, etc. It can be - customised in many ways; see the Nixpkgs manual for details. - -Discerning readers will note that the `buildInputs` could just as well -have been set in the Nix expression, like this: - -```nix - buildInputs = [ perl ]; -``` - -The `perl` attribute can then be removed, and the builder becomes even -shorter: - -```bash -source $stdenv/setup -genericBuild -``` - -In fact, `mkDerivation` provides a default builder that looks exactly -like that, so it is actually possible to omit the builder for Hello -entirely. diff --git a/doc/manual/src/expressions/language-values.md b/doc/manual/src/expressions/language-values.md deleted file mode 100644 index 75ae9f2eb..000000000 --- a/doc/manual/src/expressions/language-values.md +++ /dev/null @@ -1,251 +0,0 @@ -# Values - -## Simple Values - -Nix has the following basic data types: - - - *Strings* can be written in three ways. - - The most common way is to enclose the string between double quotes, - e.g., `"foo bar"`. Strings can span multiple lines. The special - characters `"` and `\` and the character sequence `${` must be - escaped by prefixing them with a backslash (`\`). Newlines, carriage - returns and tabs can be written as `\n`, `\r` and `\t`, - respectively. - - You can include the result of an expression into a string by - enclosing it in `${...}`, a feature known as *antiquotation*. The - enclosed expression must evaluate to something that can be coerced - into a string (meaning that it must be a string, a path, or a - derivation). For instance, rather than writing - - ```nix - "--with-freetype2-library=" + freetype + "/lib" - ``` - - (where `freetype` is a derivation), you can instead write the more - natural - - ```nix - "--with-freetype2-library=${freetype}/lib" - ``` - - The latter is automatically translated to the former. A more - complicated example (from the Nix expression for - [Qt](http://www.trolltech.com/products/qt)): - - ```nix - configureFlags = " - -system-zlib -system-libpng -system-libjpeg - ${if openglSupport then "-dlopen-opengl - -L${mesa}/lib -I${mesa}/include - -L${libXmu}/lib -I${libXmu}/include" else ""} - ${if threadSupport then "-thread" else "-no-thread"} - "; - ``` - - Note that Nix expressions and strings can be arbitrarily nested; in - this case the outer string contains various antiquotations that - themselves contain strings (e.g., `"-thread"`), some of which in - turn contain expressions (e.g., `${mesa}`). - - The second way to write string literals is as an *indented string*, - which is enclosed between pairs of *double single-quotes*, like so: - - ```nix - '' - This is the first line. - This is the second line. - This is the third line. - '' - ``` - - This kind of string literal intelligently strips indentation from - the start of each line. To be precise, it strips from each line a - number of spaces equal to the minimal indentation of the string as a - whole (disregarding the indentation of empty lines). For instance, - the first and second line are indented two spaces, while the third - line is indented four spaces. Thus, two spaces are stripped from - each line, so the resulting string is - - ```nix - "This is the first line.\nThis is the second line.\n This is the third line.\n" - ``` - - Note that the whitespace and newline following the opening `''` is - ignored if there is no non-whitespace text on the initial line. - - Antiquotation (`${expr}`) is supported in indented strings. - - Since `${` and `''` have special meaning in indented strings, you - need a way to quote them. `$` can be escaped by prefixing it with - `''` (that is, two single quotes), i.e., `''$`. `''` can be escaped - by prefixing it with `'`, i.e., `'''`. `$` removes any special - meaning from the following `$`. Linefeed, carriage-return and tab - characters can be written as `''\n`, `''\r`, `''\t`, and `''\` - escapes any other character. - - Indented strings are primarily useful in that they allow multi-line - string literals to follow the indentation of the enclosing Nix - expression, and that less escaping is typically necessary for - strings representing languages such as shell scripts and - configuration files because `''` is much less common than `"`. - Example: - - ```nix - stdenv.mkDerivation { - ... - postInstall = - '' - mkdir $out/bin $out/etc - cp foo $out/bin - echo "Hello World" > $out/etc/foo.conf - ${if enableBar then "cp bar $out/bin" else ""} - ''; - ... - } - ``` - - Finally, as a convenience, *URIs* as defined in appendix B of - [RFC 2396](http://www.ietf.org/rfc/rfc2396.txt) can be written *as - is*, without quotes. For instance, the string - `"http://example.org/foo.tar.bz2"` can also be written as - `http://example.org/foo.tar.bz2`. - - - Numbers, which can be *integers* (like `123`) or *floating point* - (like `123.43` or `.27e13`). - - Numbers are type-compatible: pure integer operations will always - return integers, whereas any operation involving at least one - floating point number will have a floating point number as a result. - - - *Paths*, e.g., `/bin/sh` or `./builder.sh`. A path must contain at - least one slash to be recognised as such. For instance, `builder.sh` - is not a path: it's parsed as an expression that selects the - attribute `sh` from the variable `builder`. If the file name is - relative, i.e., if it does not begin with a slash, it is made - absolute at parse time relative to the directory of the Nix - expression that contained it. For instance, if a Nix expression in - `/foo/bar/bla.nix` refers to `../xyzzy/fnord.nix`, the absolute path - is `/foo/xyzzy/fnord.nix`. - - If the first component of a path is a `~`, it is interpreted as if - the rest of the path were relative to the user's home directory. - e.g. `~/foo` would be equivalent to `/home/edolstra/foo` for a user - whose home directory is `/home/edolstra`. - - Paths can also be specified between angle brackets, e.g. - `<nixpkgs>`. This means that the directories listed in the - environment variable `NIX_PATH` will be searched for the given file - or directory name. - - Antiquotation is supported in any paths except those in angle brackets. - `./${foo}-${bar}.nix` is a more convenient way of writing - `./. + "/" + foo + "-" + bar + ".nix"` or `./. + "/${foo}-${bar}.nix"`. At - least one slash must appear *before* any antiquotations for this to be - recognized as a path. `a.${foo}/b.${bar}` is a syntactically valid division - operation. `./a.${foo}/b.${bar}` is a path. - - - *Booleans* with values `true` and `false`. - - - The null value, denoted as `null`. - -## Lists - -Lists are formed by enclosing a whitespace-separated list of values -between square brackets. For example, - -```nix -[ 123 ./foo.nix "abc" (f { x = y; }) ] -``` - -defines a list of four elements, the last being the result of a call to -the function `f`. Note that function calls have to be enclosed in -parentheses. If they had been omitted, e.g., - -```nix -[ 123 ./foo.nix "abc" f { x = y; } ] -``` - -the result would be a list of five elements, the fourth one being a -function and the fifth being a set. - -Note that lists are only lazy in values, and they are strict in length. - -## Sets - -Sets are really the core of the language, since ultimately the Nix -language is all about creating derivations, which are really just sets -of attributes to be passed to build scripts. - -Sets are just a list of name/value pairs (called *attributes*) enclosed -in curly brackets, where each value is an arbitrary expression -terminated by a semicolon. For example: - -```nix -{ x = 123; - text = "Hello"; - y = f { bla = 456; }; -} -``` - -This defines a set with attributes named `x`, `text`, `y`. The order of -the attributes is irrelevant. An attribute name may only occur once. - -Attributes can be selected from a set using the `.` operator. For -instance, - -```nix -{ a = "Foo"; b = "Bar"; }.a -``` - -evaluates to `"Foo"`. It is possible to provide a default value in an -attribute selection using the `or` keyword. For example, - -```nix -{ a = "Foo"; b = "Bar"; }.c or "Xyzzy" -``` - -will evaluate to `"Xyzzy"` because there is no `c` attribute in the set. - -You can use arbitrary double-quoted strings as attribute names: - -```nix -{ "foo ${bar}" = 123; "nix-1.0" = 456; }."foo ${bar}" -``` - -This will evaluate to `123` (Assuming `bar` is antiquotable). In the -case where an attribute name is just a single antiquotation, the quotes -can be dropped: - -```nix -{ foo = 123; }.${bar} or 456 -``` - -This will evaluate to `123` if `bar` evaluates to `"foo"` when coerced -to a string and `456` otherwise (again assuming `bar` is antiquotable). - -In the special case where an attribute name inside of a set declaration -evaluates to `null` (which is normally an error, as `null` is not -antiquotable), that attribute is simply not added to the set: - -```nix -{ ${if foo then "bar" else null} = true; } -``` - -This will evaluate to `{}` if `foo` evaluates to `false`. - -A set that has a `__functor` attribute whose value is callable (i.e. is -itself a function or a set with a `__functor` attribute whose value is -callable) can be applied as if it were a function, with the set itself -passed in first , e.g., - -```nix -let add = { __functor = self: x: x + self.x; }; - inc = add // { x = 1; }; -in inc 1 -``` - -evaluates to `2`. This can be used to attach metadata to a function -without the caller needing to treat it specially, or to implement a form -of object-oriented programming, for example. diff --git a/doc/manual/src/expressions/simple-building-testing.md b/doc/manual/src/expressions/simple-building-testing.md deleted file mode 100644 index 7f0d8f841..000000000 --- a/doc/manual/src/expressions/simple-building-testing.md +++ /dev/null @@ -1,61 +0,0 @@ -# Building and Testing - -You can now try to build Hello. Of course, you could do `nix-env -f . -iA -hello`, but you may not want to install a possibly broken package just -yet. The best way to test the package is by using the command -`nix-build`, which builds a Nix expression and creates a symlink named -`result` in the current directory: - -```console -$ nix-build -A hello -building path `/nix/store/632d2b22514d...-hello-2.1.1' -hello-2.1.1/ -hello-2.1.1/intl/ -hello-2.1.1/intl/ChangeLog -... - -$ ls -l result -lrwxrwxrwx ... 2006-09-29 10:43 result -> /nix/store/632d2b22514d...-hello-2.1.1 - -$ ./result/bin/hello -Hello, world! -``` - -The `-A` option selects the `hello` attribute. This is faster than -using the symbolic package name specified by the `name` attribute -(which also happens to be `hello`) and is unambiguous (there can be -multiple packages with the symbolic name `hello`, but there can be -only one attribute in a set named `hello`). - -`nix-build` registers the `./result` symlink as a garbage collection -root, so unless and until you delete the `./result` symlink, the output -of the build will be safely kept on your system. You can use -`nix-build`’s `-o` switch to give the symlink another name. - -Nix has transactional semantics. Once a build finishes successfully, Nix -makes a note of this in its database: it registers that the path denoted -by `out` is now “valid”. If you try to build the derivation again, Nix -will see that the path is already valid and finish immediately. If a -build fails, either because it returns a non-zero exit code, because Nix -or the builder are killed, or because the machine crashes, then the -output paths will not be registered as valid. If you try to build the -derivation again, Nix will remove the output paths if they exist (e.g., -because the builder died half-way through `make -install`) and try again. Note that there is no “negative caching”: Nix -doesn't remember that a build failed, and so a failed build can always -be repeated. This is because Nix cannot distinguish between permanent -failures (e.g., a compiler error due to a syntax error in the source) -and transient failures (e.g., a disk full condition). - -Nix also performs locking. If you run multiple Nix builds -simultaneously, and they try to build the same derivation, the first Nix -instance that gets there will perform the build, while the others block -(or perform other derivations if available) until the build finishes: - -```console -$ nix-build -A hello -waiting for lock on `/nix/store/0h5b7hp8d4hqfrw8igvx97x1xawrjnac-hello-2.1.1x' -``` - -So it is always safe to run multiple instances of Nix in parallel (which -isn’t the case with, say, `make`). diff --git a/doc/manual/src/expressions/simple-expression.md b/doc/manual/src/expressions/simple-expression.md deleted file mode 100644 index 857f71b9b..000000000 --- a/doc/manual/src/expressions/simple-expression.md +++ /dev/null @@ -1,23 +0,0 @@ -# A Simple Nix Expression - -This section shows how to add and test the [GNU Hello -package](http://www.gnu.org/software/hello/hello.html) to the Nix -Packages collection. Hello is a program that prints out the text “Hello, -world\!”. - -To add a package to the Nix Packages collection, you generally need to -do three things: - -1. Write a Nix expression for the package. This is a file that - describes all the inputs involved in building the package, such as - dependencies, sources, and so on. - -2. Write a *builder*. This is a shell script that builds the package - from the inputs. (In fact, it can be written in any language, but - typically it's a `bash` shell script.) - -3. Add the package to the file `pkgs/top-level/all-packages.nix`. The - Nix expression written in the first step is a *function*; it - requires other packages in order to build it. In this step you put - it all together, i.e., you call the function with the right - arguments to build the actual package. diff --git a/doc/manual/src/expressions/writing-nix-expressions.md b/doc/manual/src/expressions/writing-nix-expressions.md deleted file mode 100644 index 5664108e7..000000000 --- a/doc/manual/src/expressions/writing-nix-expressions.md +++ /dev/null @@ -1,12 +0,0 @@ -This chapter shows you how to write Nix expressions, which instruct Nix -how to build packages. It starts with a simple example (a Nix expression -for GNU Hello), and then moves on to a more in-depth look at the Nix -expression language. - -> **Note** -> -> This chapter is mostly about the Nix expression language. For more -> extensive information on adding packages to the Nix Packages -> collection (such as functions in the standard environment and coding -> conventions), please consult [its -> manual](http://nixos.org/nixpkgs/manual/). diff --git a/doc/manual/src/glossary.md b/doc/manual/src/glossary.md index 3448b971b..aa0ac78cb 100644 --- a/doc/manual/src/glossary.md +++ b/doc/manual/src/glossary.md @@ -3,7 +3,7 @@ - [derivation]{#gloss-derivation}\ A description of a build action. The result of a derivation is a store object. Derivations are typically specified in Nix expressions - using the [`derivation` primitive](expressions/derivations.md). These are + using the [`derivation` primitive](language/derivations.md). These are translated into low-level *store derivations* (implicitly by `nix-env` and `nix-build`, or explicitly by `nix-instantiate`). diff --git a/doc/manual/src/expressions/advanced-attributes.md b/doc/manual/src/language/advanced-attributes.md index 2e7e80ed0..2e7e80ed0 100644 --- a/doc/manual/src/expressions/advanced-attributes.md +++ b/doc/manual/src/language/advanced-attributes.md diff --git a/doc/manual/src/expressions/builtin-constants.md b/doc/manual/src/language/builtin-constants.md index 78d066a82..78d066a82 100644 --- a/doc/manual/src/expressions/builtin-constants.md +++ b/doc/manual/src/language/builtin-constants.md diff --git a/doc/manual/src/expressions/builtins-prefix.md b/doc/manual/src/language/builtins-prefix.md index c631a8453..c631a8453 100644 --- a/doc/manual/src/expressions/builtins-prefix.md +++ b/doc/manual/src/language/builtins-prefix.md diff --git a/doc/manual/src/expressions/builtins-suffix.md b/doc/manual/src/language/builtins-suffix.md index a74db2857..a74db2857 100644 --- a/doc/manual/src/expressions/builtins-suffix.md +++ b/doc/manual/src/language/builtins-suffix.md diff --git a/doc/manual/src/expressions/language-constructs.md b/doc/manual/src/language/constructs.md index 1c01f2cc7..1c01f2cc7 100644 --- a/doc/manual/src/expressions/language-constructs.md +++ b/doc/manual/src/language/constructs.md diff --git a/doc/manual/src/expressions/derivations.md b/doc/manual/src/language/derivations.md index 3391ec0d8..3391ec0d8 100644 --- a/doc/manual/src/expressions/derivations.md +++ b/doc/manual/src/language/derivations.md diff --git a/doc/manual/src/expressions/expression-language.md b/doc/manual/src/language/index.md index 267fcb983..c4b3abf75 100644 --- a/doc/manual/src/expressions/expression-language.md +++ b/doc/manual/src/language/index.md @@ -1,6 +1,6 @@ -# Nix Expression Language +# Nix Language -The Nix expression language is a pure, lazy, functional language. Purity +The Nix language is a pure, lazy, functional language. Purity means that operations in the language don't have side-effects (for instance, there is no variable assignment). Laziness means that arguments to functions are evaluated only when they are needed. @@ -10,3 +10,4 @@ full-featured, general purpose language. Its main job is to describe packages, compositions of packages, and the variability within packages. This section presents the various features of the language. + diff --git a/doc/manual/src/expressions/language-operators.md b/doc/manual/src/language/operators.md index 268b44f4c..32398189d 100644 --- a/doc/manual/src/expressions/language-operators.md +++ b/doc/manual/src/language/operators.md @@ -1,6 +1,6 @@ # Operators -The table below lists the operators in the Nix expression language, in +The table below lists the operators in the Nix language, in order of precedence (from strongest to weakest binding). | Name | Syntax | Associativity | Description | Precedence | diff --git a/doc/manual/src/language/values.md b/doc/manual/src/language/values.md new file mode 100644 index 000000000..f09400d02 --- /dev/null +++ b/doc/manual/src/language/values.md @@ -0,0 +1,261 @@ +# Data Types + +## Primitives + +- <a id="type-string" href="#type-string">String</a> + + *Strings* can be written in three ways. + + The most common way is to enclose the string between double quotes, + e.g., `"foo bar"`. Strings can span multiple lines. The special + characters `"` and `\` and the character sequence `${` must be + escaped by prefixing them with a backslash (`\`). Newlines, carriage + returns and tabs can be written as `\n`, `\r` and `\t`, + respectively. + + You can include the result of an expression into a string by + enclosing it in `${...}`, a feature known as *antiquotation*. The + enclosed expression must evaluate to something that can be coerced + into a string (meaning that it must be a string, a path, or a + derivation). For instance, rather than writing + + ```nix + "--with-freetype2-library=" + freetype + "/lib" + ``` + + (where `freetype` is a derivation), you can instead write the more + natural + + ```nix + "--with-freetype2-library=${freetype}/lib" + ``` + + The latter is automatically translated to the former. A more + complicated example (from the Nix expression for + [Qt](http://www.trolltech.com/products/qt)): + + ```nix + configureFlags = " + -system-zlib -system-libpng -system-libjpeg + ${if openglSupport then "-dlopen-opengl + -L${mesa}/lib -I${mesa}/include + -L${libXmu}/lib -I${libXmu}/include" else ""} + ${if threadSupport then "-thread" else "-no-thread"} + "; + ``` + + Note that Nix expressions and strings can be arbitrarily nested; in + this case the outer string contains various antiquotations that + themselves contain strings (e.g., `"-thread"`), some of which in + turn contain expressions (e.g., `${mesa}`). + + The second way to write string literals is as an *indented string*, + which is enclosed between pairs of *double single-quotes*, like so: + + ```nix + '' + This is the first line. + This is the second line. + This is the third line. + '' + ``` + + This kind of string literal intelligently strips indentation from + the start of each line. To be precise, it strips from each line a + number of spaces equal to the minimal indentation of the string as a + whole (disregarding the indentation of empty lines). For instance, + the first and second line are indented two spaces, while the third + line is indented four spaces. Thus, two spaces are stripped from + each line, so the resulting string is + + ```nix + "This is the first line.\nThis is the second line.\n This is the third line.\n" + ``` + + Note that the whitespace and newline following the opening `''` is + ignored if there is no non-whitespace text on the initial line. + + Antiquotation (`${expr}`) is supported in indented strings. + + Since `${` and `''` have special meaning in indented strings, you + need a way to quote them. `$` can be escaped by prefixing it with + `''` (that is, two single quotes), i.e., `''$`. `''` can be escaped + by prefixing it with `'`, i.e., `'''`. `$` removes any special + meaning from the following `$`. Linefeed, carriage-return and tab + characters can be written as `''\n`, `''\r`, `''\t`, and `''\` + escapes any other character. + + Indented strings are primarily useful in that they allow multi-line + string literals to follow the indentation of the enclosing Nix + expression, and that less escaping is typically necessary for + strings representing languages such as shell scripts and + configuration files because `''` is much less common than `"`. + Example: + + ```nix + stdenv.mkDerivation { + ... + postInstall = + '' + mkdir $out/bin $out/etc + cp foo $out/bin + echo "Hello World" > $out/etc/foo.conf + ${if enableBar then "cp bar $out/bin" else ""} + ''; + ... + } + ``` + + Finally, as a convenience, *URIs* as defined in appendix B of + [RFC 2396](http://www.ietf.org/rfc/rfc2396.txt) can be written *as + is*, without quotes. For instance, the string + `"http://example.org/foo.tar.bz2"` can also be written as + `http://example.org/foo.tar.bz2`. + +- <a id="type-number" href="#type-number">Number</a> + + Numbers, which can be *integers* (like `123`) or *floating point* + (like `123.43` or `.27e13`). + + Numbers are type-compatible: pure integer operations will always + return integers, whereas any operation involving at least one + floating point number will have a floating point number as a result. + +- <a id="type-path" href="#type-path">Path</a> + + *Paths*, e.g., `/bin/sh` or `./builder.sh`. A path must contain at + least one slash to be recognised as such. For instance, `builder.sh` + is not a path: it's parsed as an expression that selects the + attribute `sh` from the variable `builder`. If the file name is + relative, i.e., if it does not begin with a slash, it is made + absolute at parse time relative to the directory of the Nix + expression that contained it. For instance, if a Nix expression in + `/foo/bar/bla.nix` refers to `../xyzzy/fnord.nix`, the absolute path + is `/foo/xyzzy/fnord.nix`. + + If the first component of a path is a `~`, it is interpreted as if + the rest of the path were relative to the user's home directory. + e.g. `~/foo` would be equivalent to `/home/edolstra/foo` for a user + whose home directory is `/home/edolstra`. + + Paths can also be specified between angle brackets, e.g. + `<nixpkgs>`. This means that the directories listed in the + environment variable `NIX_PATH` will be searched for the given file + or directory name. + + Antiquotation is supported in any paths except those in angle brackets. + `./${foo}-${bar}.nix` is a more convenient way of writing + `./. + "/" + foo + "-" + bar + ".nix"` or `./. + "/${foo}-${bar}.nix"`. At + least one slash must appear *before* any antiquotations for this to be + recognized as a path. `a.${foo}/b.${bar}` is a syntactically valid division + operation. `./a.${foo}/b.${bar}` is a path. + +- <a id="type-boolean" href="#type-boolean">Boolean</a> + + *Booleans* with values `true` and `false`. + +- <a id="type-null" href="#type-null">Null</a> + + The null value, denoted as `null`. + +## List + +Lists are formed by enclosing a whitespace-separated list of values +between square brackets. For example, + +```nix +[ 123 ./foo.nix "abc" (f { x = y; }) ] +``` + +defines a list of four elements, the last being the result of a call to +the function `f`. Note that function calls have to be enclosed in +parentheses. If they had been omitted, e.g., + +```nix +[ 123 ./foo.nix "abc" f { x = y; } ] +``` + +the result would be a list of five elements, the fourth one being a +function and the fifth being a set. + +Note that lists are only lazy in values, and they are strict in length. + +## Attribute Set + +An attribute set is a collection of name-value-pairs (called *attributes*) enclosed in curly brackets (`{ }`). + +Names and values are separated by an equal sign (`=`). +Each value is an arbitrary expression terminated by a semicolon (`;`). + +Attributes can appear in any order. +An attribute name may only occur once. + +Example: + +```nix +{ + x = 123; + text = "Hello"; + y = f { bla = 456; }; +} +``` + +This defines a set with attributes named `x`, `text`, `y`. + +Attributes can be selected from a set using the `.` operator. For +instance, + +```nix +{ a = "Foo"; b = "Bar"; }.a +``` + +evaluates to `"Foo"`. It is possible to provide a default value in an +attribute selection using the `or` keyword. For example, + +```nix +{ a = "Foo"; b = "Bar"; }.c or "Xyzzy" +``` + +will evaluate to `"Xyzzy"` because there is no `c` attribute in the set. + +You can use arbitrary double-quoted strings as attribute names: + +```nix +{ "foo ${bar}" = 123; "nix-1.0" = 456; }."foo ${bar}" +``` + +This will evaluate to `123` (Assuming `bar` is antiquotable). In the +case where an attribute name is just a single antiquotation, the quotes +can be dropped: + +```nix +{ foo = 123; }.${bar} or 456 +``` + +This will evaluate to `123` if `bar` evaluates to `"foo"` when coerced +to a string and `456` otherwise (again assuming `bar` is antiquotable). + +In the special case where an attribute name inside of a set declaration +evaluates to `null` (which is normally an error, as `null` is not +antiquotable), that attribute is simply not added to the set: + +```nix +{ ${if foo then "bar" else null} = true; } +``` + +This will evaluate to `{}` if `foo` evaluates to `false`. + +A set that has a `__functor` attribute whose value is callable (i.e. is +itself a function or a set with a `__functor` attribute whose value is +callable) can be applied as if it were a function, with the set itself +passed in first , e.g., + +```nix +let add = { __functor = self: x: x + self.x; }; + inc = add // { x = 1; }; +in inc 1 +``` + +evaluates to `2`. This can be used to attach metadata to a function +without the caller needing to treat it specially, or to implement a form +of object-oriented programming, for example. diff --git a/doc/manual/src/package-management/package-management.md b/doc/manual/src/package-management/package-management.md index bd26a09ab..d528112e2 100644 --- a/doc/manual/src/package-management/package-management.md +++ b/doc/manual/src/package-management/package-management.md @@ -1,5 +1,4 @@ This chapter discusses how to do package management with Nix, i.e., how to obtain, install, upgrade, and erase packages. This is the “user’s” perspective of the Nix system — people who want to *create* -packages should consult the [chapter on writing Nix -expressions](../expressions/writing-nix-expressions.md). +packages should consult the chapter on the [Nix language](../language/index.md). diff --git a/doc/manual/src/release-notes/rl-2.10.md b/doc/manual/src/release-notes/rl-2.10.md new file mode 100644 index 000000000..b99dbeef0 --- /dev/null +++ b/doc/manual/src/release-notes/rl-2.10.md @@ -0,0 +1,31 @@ +# Release 2.10 (2022-07-11) + +* `nix repl` now takes installables on the command line, unifying the usage + with other commands that use `--file` and `--expr`. Primary breaking change + is for the common usage of `nix repl '<nixpkgs>'` which can be recovered with + `nix repl --file '<nixpkgs>'` or `nix repl --expr 'import <nixpkgs>{}'`. + + This is currently guarded by the `repl-flake` experimental feature. + +* A new function `builtins.traceVerbose` is available. It is similar + to `builtins.trace` if the `trace-verbose` setting is set to true, + and it is a no-op otherwise. + +* `nix search` has a new flag `--exclude` to filter out packages. + +* On Linux, if `/nix` doesn't exist and cannot be created and you're + not running as root, Nix will automatically use + `~/.local/share/nix/root` as a chroot store. This enables non-root + users to download the statically linked Nix binary and have it work + out of the box, e.g. + + ``` + # ~/nix run nixpkgs#hello + warning: '/nix' does not exists, so Nix will use '/home/ubuntu/.local/share/nix/root' as a chroot store + Hello, world! + ``` + +* `flake-registry.json` is now fetched from `channels.nixos.org`. + +* Nix can now be built with LTO by passing `--enable-lto` to `configure`. + LTO is currently only supported when building with GCC. diff --git a/doc/manual/src/release-notes/rl-next.md b/doc/manual/src/release-notes/rl-next.md index 52e3b6240..78ae99f4b 100644 --- a/doc/manual/src/release-notes/rl-next.md +++ b/doc/manual/src/release-notes/rl-next.md @@ -1,4 +1,2 @@ # Release X.Y (202?-??-??) -* Nix can now be built with LTO by passing `--enable-lto` to `configure`. - LTO is currently only supported when building with GCC. |