1 files changed, 86 insertions, 26 deletions

diff --git a/scripts/install-darwin-multi-user.sh b/scripts/install-darwin-multi-user.sh
index f6575ae2f..a5166de64 100644
--- a/scripts/install-darwin-multi-user.sh
+++ b/scripts/install-darwin-multi-user.sh
@@ -3,59 +3,99 @@
 set -eu
 set -o pipefail
 
-readonly PLIST_DEST=/Library/LaunchDaemons/org.nixos.nix-daemon.plist
+readonly NIX_DAEMON_DEST=/Library/LaunchDaemons/org.nixos.nix-daemon.plist
+# create by default; set 0 to DIY, use a symlink, etc.
+readonly NIX_VOLUME_CREATE=${NIX_VOLUME_CREATE:-1} # now default
 NIX_FIRST_BUILD_UID="301"
 NIX_BUILD_USER_NAME_TEMPLATE="_nixbld%d"
 
+# caution: may update times on / if not run as normal non-root user
+read_only_root() {
+    # this touch command ~should~ always produce an error
+    # as of this change I confirmed /usr/bin/touch emits:
+    # "touch: /: Read-only file system" Catalina+ and Big Sur
+    # "touch: /: Permission denied" Mojave
+    # (not matching prefix for compat w/ coreutils touch in case using
+    # an explicit path causes problems; its prefix differs)
+    [[ "$(/usr/bin/touch / 2>&1)" = *"Read-only file system" ]]
+
+    # Avoiding the slow semantic way to get this information (~330ms vs ~8ms)
+    # unless using touch causes problems. Just in case, that approach is:
+    # diskutil info -plist / | <find the Writable or WritableVolume keys>, i.e.
+    # diskutil info -plist / | xmllint --xpath "name(/plist/dict/key[text()='Writable']/following-sibling::*[1])" -
+}
+
+if read_only_root && [ "$NIX_VOLUME_CREATE" = 1 ]; then
+    should_create_volume() { return 0; }
+else
+    should_create_volume() { return 1; }
+fi
+
+# shellcheck source=./create-darwin-volume.sh
+. "$EXTRACTED_NIX_PATH/create-darwin-volume.sh" "no-main"
+
 dsclattr() {
     /usr/bin/dscl . -read "$1" \
-        | awk "/$2/ { print \$2 }"
+        | /usr/bin/awk "/$2/ { print \$2 }"
+}
+
+test_nix_daemon_installed() {
+  test -e "$NIX_DAEMON_DEST"
 }
 
-poly_validate_assumptions() {
-    if [ "$(uname -s)" != "Darwin" ]; then
-        failure "This script is for use with macOS!"
+poly_cure_artifacts() {
+    if should_create_volume; then
+        task "Fixing any leftover Nix volume state"
+        cat <<EOF
+Before I try to install, I'll check for any existing Nix volume config
+and ask for your permission to remove it (so that the installer can
+start fresh). I'll also ask for permission to fix any issues I spot.
+EOF
+        cure_volumes
+        remove_volume_artifacts
     fi
 }
 
 poly_service_installed_check() {
-    [ -e "$PLIST_DEST" ]
+    if should_create_volume; then
+        test_nix_daemon_installed || test_nix_volume_mountd_installed
+    else
+        test_nix_daemon_installed
+    fi
 }
 
 poly_service_uninstall_directions() {
-        cat <<EOF
-$1. Delete $PLIST_DEST
-
-  sudo launchctl unload $PLIST_DEST
-  sudo rm $PLIST_DEST
-
-EOF
+    echo "$1. Remove macOS-specific components:"
+    if should_create_volume && test_nix_volume_mountd_installed; then
+        darwin_volume_uninstall_directions
+    fi
+    if test_nix_daemon_installed; then
+        nix_daemon_uninstall_directions
+    fi
 }
 
 poly_service_setup_note() {
-    cat <<EOF
- - load and start a LaunchDaemon (at $PLIST_DEST) for nix-daemon
-
-EOF
+    if should_create_volume; then
+        echo " - create a Nix volume and a LaunchDaemon to mount it"
+    fi
+    echo " - create a LaunchDaemon (at $NIX_DAEMON_DEST) for nix-daemon"
+    echo ""
 }
 
-poly_extra_try_me_commands(){
-  :
-}
-poly_extra_setup_instructions(){
-  :
+poly_extra_try_me_commands() {
+    :
 }
 
 poly_configure_nix_daemon_service() {
+    task "Setting up the nix-daemon LaunchDaemon"
     _sudo "to set up the nix-daemon as a LaunchDaemon" \
-          cp -f "/nix/var/nix/profiles/default$PLIST_DEST" "$PLIST_DEST"
+          /bin/cp -f "/nix/var/nix/profiles/default$NIX_DAEMON_DEST" "$NIX_DAEMON_DEST"
 
     _sudo "to load the LaunchDaemon plist for nix-daemon" \
           launchctl load /Library/LaunchDaemons/org.nixos.nix-daemon.plist
 
     _sudo "to start the nix-daemon" \
-          launchctl start org.nixos.nix-daemon
-
+          launchctl kickstart -k system/org.nixos.nix-daemon
 }
 
 poly_group_exists() {
@@ -96,6 +136,8 @@ poly_user_home_get() {
 }
 
 poly_user_home_set() {
+    # This can trigger a permission prompt now:
+    # "Terminal" would like to administer your computer. Administration can include modifying passwords, networking, and system settings.
     _sudo "in order to give $1 a safe home directory" \
           /usr/bin/dscl . -create "/Users/$1" "NFSHomeDirectory" "$2"
 }
@@ -121,7 +163,7 @@ poly_user_shell_set() {
 poly_user_in_group_check() {
     username=$1
     group=$2
-    dseditgroup -o checkmember -m "$username" "$group" > /dev/null 2>&1
+    /usr/sbin/dseditgroup -o checkmember -m "$username" "$group" > /dev/null 2>&1
 }
 
 poly_user_in_group_set() {
@@ -151,3 +193,21 @@ poly_create_build_user() {
           /usr/bin/dscl . create "/Users/$username" \
           UniqueID "${uid}"
 }
+
+poly_prepare_to_install() {
+    if should_create_volume; then
+        header "Preparing a Nix volume"
+        # intentional indent below to match task indent
+        cat <<EOF
+    Nix traditionally stores its data in the root directory $NIX_ROOT, but
+    macOS now (starting in 10.15 Catalina) has a read-only root directory.
+    To support Nix, I will create a volume and configure macOS to mount it
+    at $NIX_ROOT.
+EOF
+        setup_darwin_volume
+    fi
+
+    if [ "$(diskutil info -plist /nix | xmllint --xpath "(/plist/dict/key[text()='GlobalPermissionsEnabled'])/following-sibling::*[1]" -)" = "<false/>" ]; then
+        failure "This script needs a /nix volume with global permissions! This may require running sudo diskutil enableOwnership /nix."
+    fi
+}