| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Don’t use entire /etc/nsswitch.conf file
|
|
This is a much simpler fix to the 'error 9 while decompressing xz
file' problem than 78fa47a7f08a4cb6ee7061bf0bd86a40e1d6dc91. We just
do a ranged HTTP request starting after the data that we previously
wrote into the sink.
Fixes #2952, #379.
|
|
|
|
|
|
This reverts commit 78fa47a7f08a4cb6ee7061bf0bd86a40e1d6dc91.
|
|
'--substitute' was being shadowed by the regular '--substitute' (the
short-hand for '--option substitute true').
Fixes #2983.
|
|
tarball-ttl: document
|
|
Incorporates text from Niklas Hambüchen in #2978
Closes #1115
|
|
cd8bc06e8786018ddb16cea4cb10971b63d0efd2, c3db9e6f8fd06d691be04cdd95a6bb21a400481d
This breaks the tarball job: https://hydra.nixos.org/build/95714570
|
|
|
|
This should finally allow us to address all cases of build errors due to
differences between release tarballs and building from git.
See also https://github.com/NixOS/nix/issues/506#issuecomment-507312587
|
|
This is to avoid confusion as in commit
a0d29040f79b365598fe75d01f72d29ab538206b.
|
|
Also give a helpful error message on what package the user likely
has to install to make it work.
|
|
Our use of boost::coroutine2 depends on -lboost_context,
which in turn depends on `-lboost_thread`, which in turn depends
on `-lboost_system`.
I suspect that this builds on nix only because of low-level hacks
like NIX_LDFLAGS.
This commit passes the proper linker flags, thus fixing bootstrap
builds on non-nix distributions like Ubuntu 16.04.
With these changes, I can build Nix on Ubuntu 16.04 using:
./bootstrap.sh
./configure --prefix=$HOME/editline-prefix \
--disable-doc-gen \
CXX=g++-7 \
--with-boost=$HOME/boost-prefix \
EDITLINE_CFLAGS=-I$HOME/editline-prefix/include \
EDITLINE_LIBS=-leditline \
LDFLAGS=-L$HOME/editline-prefix/lib
make
where
* g++-7 comes from gcc-7 from
https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test,
* editline 1.14 from https://github.com/troglobit/editline/releases/tag/1.14.0
was installed into `$HOME/editline-prefix`
(because Ubuntu 16.04's `editline` is too old to have the function nix uses),
* boost 1.66 from
https://www.boost.org/doc/libs/1_66_0/more/getting_started/unix-variants.html
was installed into $HOME/boost-prefix (because Ubuntu 16.04 only has 1.58)
|
|
For example, Ubuntu 16.04 and many similar long-term-support distros
have older versions.
|
|
It was forgotten to be removed with
commit c5f23f10a84f568874321c04984b1a14d2dce978
and so it until now stayed unsubstituted as `HAVE_READLINE = @HAVE_READLINE@`
in Makefile.config.
|
|
As is normal for autoconf-based projects.
For example, it is a common use case to do
./configure CXXFLAGS=-O0
This did not work for nix until now, because the `CXXFLAGS=` declaration
would unconditionally erase what the user had specified.
The custom `OPTIMIZE` flag is removed, but the default `-O3` is retained;
autoconf would default to `-g -O2` by default otherwise as documented on:
https://www.gnu.org/software/autoconf/manual/autoconf-2.60/html_node/C-Compiler.html
https://www.gnu.org/software/autoconf/manual/autoconf-2.60/html_node/C_002b_002b-Compiler.html
|
|
That was incorrect, because checking the dirent type already requires
a working compiler.
It had the effect that setting e.g. `: ${CFLAGS=""}` before `AC_PROG_CC`
as per `AC_PROG_CC`'s documentation would have no effect, because
`AC_STRUCT_DIRENT_D_TYPE` would automatically set CFLASGS.
(In a followup commit `: ${CFLAGS=""}` will be used, so it's important
to get this working first.)
|
|
autotools-based systems usually allow user to
append own LDFLAGS like
LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,--hash-style=gnu"
at ./configure stage
This change plumbs LDFLAGS through similar to existing CXXFLAGS variable.
Signed-off-by: Sergei Trofimovich <siarheit@google.com>
|
|
And probably many other distributions.
Until now, ./configure would fail silently printing a warning
./configure: line 4621: AX_CXX_COMPILE_STDCXX_17: command not found
and then continuing, later failing with a C++ #error saying that some C++11
feature isn't supported (it didn't even get to the C++17 features).
This is because older distributions don't come with the
`AX_CXX_COMPILE_STDCXX_17` m4 macro.
This commit vendors that macro accordingly.
Now ./configure complains correctly:
configure: error: *** A compiler with support for C++17 language features is required.
On Ubuntu 16.04, ./configure completes if a newer compiler is used, e.g. with
gcc-7 from https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test
using:
./bootstrap.sh
./configure CXX=g++-7 --disable-doc-gen --with-boost=$(nix-build --no-link '<nixpkgs>' -A boost.dev)
|
|
And probably other Linux distributions with long-term support releases.
Also update manual stating what version is needed;
I checked that 1.14 is the oldest version with which current nix compiles,
and added autoconf feature checks for some functions added in that release
that nix uses.
|
|
This turns previous compiler errors complaining about missing files
into proper ./configure time errors telling the user which version
of boost is required.
|
|
The unbalanced single-quotes cause many editor syntax highlighters
to interpret the rest of the file as a string literal, making it easier
to make syntax mistakes in absence of proper highlighting.
|
|
build: add exit code for hash and check mismatches
|
|
|
|
checkStoreName: give more precise/verbose error information
|
|
nix-store: document --add-fixed
|
|
fetchGit: allow fetching explicit refs
|
|
|
|
|
|
$ sudo ./inst/bin/nix-instantiate -E '"${./.git}"'
error: The path name '.git' is invalid: it is illegal to start the
name with a period. Path names are alphanumeric and can include the
symbols +-._?= and must not begin with a period. Note: If '.git' is a
source file and you cannot rename it on disk,
builtins.path { name = ... } can be used to give it an alternative
name.
|
|
|
|
|
|
|
|
If multiple builds with fail with different errors it will be reflected
in the status code.
eg.
103 => timeout + hash mismatch
105 => timeout + check mismatch
106 => hash mismatch + check mismatch
107 => timeout + hash mismatch + check mismatch
|
|
Makes it easier to identify the failure reason in other tooling, eg.
differentiate between a non-deterministic --check vs a failed build.
$ nix-build '<nix/fetchurl.nix>' --argstr url http://example.org --argstr sha256 0000000000000000000000000000000000000000000000000000
hash mismatch in fixed-output derivation '/nix/store/nzi9ck45rwlxzcwr25is7qlf3hs5xl83-example.org':
wanted: sha256:0000000000000000000000000000000000000000000000000000
got: sha256:08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm
$ echo $?
102
$ nix-build -E 'with import <nixpkgs> {}; runCommand "foo" {} "date +%s > $out"' --check
warning: rewriting hashes in '/nix/store/g3k47g0399fvjmbm0p0mnad74k4w8vkz-foo'; cross fingers
error: derivation '/nix/store/mggc8dz13ackb49qca6m23zq4fpq132q-foo.drv' may not be deterministic: output '/nix/store/g3k47g0399fvjmbm0p0mnad74k4w8vkz-foo' differs
$ echo $?
104
|
|
Fix `http2 = false` having no effect.
|
|
Setting `http2 = false` in nix config (e.g. /etc/nix/nix.conf)
had no effect, and `nix-env -vvvvv -i hello` still downloaded .nar
packages using HTTP/2.
In `src/libstore/download.cc`, the `CURL_HTTP_VERSION_2TLS` option was
being explicitly set when `downloadSettings.enableHttp2` was `true`,
but, `CURL_HTTP_VERSION_1_1` option was not being explicitly set when
`downloadSettings.enableHttp2` was `false`.
This may be because `https://curl.haxx.se/libcurl/c/libcurl-env.html` states:
"You have to set this option if you want to use libcurl's HTTP/2 support."
but, also, in the changelog, states:
"DEFAULT
Since curl 7.62.0: CURL_HTTP_VERSION_2TLS
Before that: CURL_HTTP_VERSION_1_1"
So, the default setting for `libcurl` is HTTP/2 for version >= 7.62.0.
In this commit, option `CURLOPT_HTTP_VERSION` is explicitly set to
`CURL_HTTP_VERSION_1_1` when `downloadSettings.enableHttp2` nix config
setting is `false`.
This can be tested by running `nix-env -vvvvv -i hello | grep HTTP`
|
|
Issue #2976.
|
|
The default nsswitch.conf(5) file in most distros can handle many
different things including host name, user names, groups, etc. In Nix,
we want to limit the amount of impurities that come from these things.
As a result, we should only allow nss to be used for gethostbyname(3)
and getservent(3).
/cc @Ericson2314
|
|
'updateCV.notify_one()' does nothing if the update thread is not
waiting for updateCV (in particular this happens when it is sleeping
on quitCV). So also set a variable to ensure that the update isn't
lost.
|
|
This has been ignored since the Perl->C++ rewrite.
|
|
(cherry picked from commit 04a59769963fe2a28d10ba15de743fe499333c80)
|
|
This ensures that "nix" shows warnings. Previously these were hidden
because they were at "info" level.
(cherry picked from commit 615a9d031d22a6aee64f8511e15685e47b6f8796)
|
|
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
(cherry picked from commit 29ccb2e9697ee2184012dd13854e487928ae4441)
|
|
(cherry picked from commit df3f5a78d5ab0a1f2dc9d288b271b38a9b8b33b5)
|
|
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
(cherry picked from commit 8ea842260b4fd93315d35c5ba94b1ff99ab391d8)
|
|
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes #2952.
(cherry picked from commit a67cf5a3585c41dd9f219a2c7aa9cf67fa69520b)
|
|
(cherry picked from commit 15fa70cd1b853f5e62662b99ccb9ef3da6cfadff)
|
