lix -

Age	Commit message (Collapse)	Author
2012-10-10	Out-of-tree building of perl modules.	Mats Erik Andersson

2012-10-03	Rename nix-worker to nix-daemon	Eelco Dolstra

2012-10-03	Remove bin2c	Eelco Dolstra

2012-09-14	Test whether GNU tar understands --warning=no-timestamp	Eelco Dolstra
	http://hydra.nixos.org/build/3031618
2012-08-27	Whitespace	Eelco Dolstra

2012-08-01	Use a GNU tar flag to shut up warnings about implausibly old timestamp	Eelco Dolstra

2012-07-26	Merge branch 'master' into no-manifests	Eelco Dolstra

2012-07-23	Handle platforms that don't support linking to a symlink	Eelco Dolstra
	E.g. Darwin doesn't allow this.
2012-07-23	Use lutimes() if available to canonicalise the timestamp of symlinks	Eelco Dolstra
	Also use utimes() instead of utime() if lutimes() is not available.
2012-07-09	Add WWW::Curl as a dependency	Eelco Dolstra

2012-06-29	Use XZ compression in binary caches	Eelco Dolstra
	XZ compresses significantly better than bzip2. Here are the compression ratios and execution times (using 4 cores in parallel) on my /var/run/current-system (3.1 GiB): bzip2: total compressed size 849.56 MiB, 30.8% [2m08] xz -6: total compressed size 641.84 MiB, 23.4% [6m53] xz -7: total compressed size 621.82 MiB, 22.6% [7m19] xz -8: total compressed size 599.33 MiB, 21.8% [7m18] xz -9: total compressed size 588.18 MiB, 21.4% [7m40] Note that compression takes much longer. More importantly, however, decompression is much faster: bzip2: 1m47.274s xz -6: 0m55.446s xz -7: 0m54.119s xz -8: 0m52.388s xz -9: 0m51.842s The only downside to using -9 is that decompression takes a fair amount (~65 MB) of memory.
2012-05-10	Support building with the Perl XS bindings disabled	Eelco Dolstra
	Since the Perl bindings require shared libraries, this is required on platforms such as Cygwin where we do a static build.
2012-05-04	Require SQLite >= 3.6.19	Eelco Dolstra
	Nix needs SQLite's foreign key constraint feature, which was introduced in 3.6.19. Without it, the database won't be cleaned up correctly when paths are deleted. See e.g. http://hydra.nixos.org/build/2494142.
2012-04-13	If "pv" is available at compile time, hard-code its path	Eelco Dolstra

2012-03-19	Fix the optional dependency on OpenSSL	Eelco Dolstra
	http://hydra.nixos.org/build/2306540
2012-03-18	Drop the externals directory	Eelco Dolstra
	Nix now requires SQLite and bzip2 to be pre-installed. SQLite is detected using pkg-config. We required DBD::SQLite anyway, so depending on SQLite is not a big problem. The --with-bzip2, --with-openssl and --with-sqlite flags are gone.
2012-02-15	On Linux, make the Nix store really read-only by using the immutable bit	Eelco Dolstra
	I was bitten one time too many by Python modifying the Nix store by creating *.pyc files when run as root. On Linux, we can prevent this by setting the immutable bit on files and directories (as in ‘chattr +i’). This isn't supported by all filesystems, so it's not an error if setting the bit fails. The immutable bit is cleared by the garbage collector before deleting a path. The only tricky aspect is in optimiseStore(), since it's forbidden to create hard links to an immutable file. Thus optimiseStore() temporarily clears the immutable bit before creating the link.
2012-01-11	* Figure out the extension of dynamic libraries; don't hard-code .so.	Eelco Dolstra

2012-01-05	* Add a -I flag to the Perl bindings to nix-build and some other	Eelco Dolstra
	scripts. * Include the version and architecture in the -I flag so that there is at least a chance that a Nix binary built for one Perl version will run on another version.
2012-01-04	* Let --disable-gc work.	Eelco Dolstra

2012-01-03	* Add a test for nix-channel.	Eelco Dolstra
	* Refactor the nix-channel unpacker a bit.
2011-11-21	* Doh.	Eelco Dolstra

2011-11-21	* Put back the "sys_name" variable which got removed somewhere. This	Eelco Dolstra
	broke building on Cygwin and Solaris.
2011-11-21	* Escape the [ and ] characters in the sed call, otherwise autoconf	Eelco Dolstra
	will eat them.
2011-11-20	* "sed" on FreeBSD doesn't know the "+" operator.	Eelco Dolstra

2011-11-18	* In the platform, canonicalise "amd64" to "x86_64". FreeBSD 8.2's	Eelco Dolstra
	uname reports amd64. * Drop the FreeBSD version number, e.g. "i686-freebsd" instead of "i686-freebsd8.2".
2011-11-16	configure: Change i*86 to i686 as has always been done.	Ludovic Courtès

2011-11-16	configure: Rely on `AC_CANONICAL_HOST' to determine the Nix system name.	Ludovic Courtès
	This should be more robust and also plays better with cross-compilation---it uses the host name, instead of using the build name.
2011-11-07	* Boldly make SQLite WAL mode the default again. Hopefully the	Eelco Dolstra
	intermittent problems are gone by now. WAL mode is preferrable because it does way fewer fsyncs.
2011-10-10	* Install NixManifest.pm, NixConfig.pm and GeneratePatches.pm under	Eelco Dolstra
	the Nix:: namespace.
2011-10-10	* Include the Nix Perl bindings in Nix itself. This will allow the	Eelco Dolstra
	bindings to be used in Nix's own Perl scripts. The only downside is that Perl XS and Automake/libtool don't really like each other, so building is a bit tricky.
2011-07-13	* Show the default for --with-store-dir (Nix/211).	Eelco Dolstra

2011-07-04	(no commit message)	Eelco Dolstra

2011-06-27	(no commit message)	Eelco Dolstra

2011-06-27	(no commit message)	Eelco Dolstra

2011-05-03	* Use SQLite 3.7.6.2.	Eelco Dolstra

2011-04-11	* configure: detect whether DBD::SQLite is present. If necessary the	Eelco Dolstra
	location to DBI and DBD::SQLite can be passed with --with-dbi and --with-dbd-sqlite.
2011-02-10	* Don't allocate a big initial GC address space on machines with	Eelco Dolstra
	little RAM. Even if the memory isn't actually used, it can cause problems with the overcommit heuristics in the kernel. So use a VM space of 25% of RAM, up to 384 MB.
2011-02-09	Use $BDW_GC_LIBS instead of a custom variable.	Ludovic Courtès

2011-02-09	* A better fix. $boehmgc isn't set anywhere, we should use the flags	Eelco Dolstra
	returned by pkg-config.
2011-02-08	(no commit message)	Eelco Dolstra

2010-12-17	* Do a short sleep after SQLITE_BUSY.	Eelco Dolstra

2010-12-10	* Use SQLite 3.7.4.	Eelco Dolstra

2010-11-16	* Sync with the trunk.	Eelco Dolstra

2010-10-29	* Use pkgconfig to locate the Boehm GC (as suggested by Ludo), if	Eelco Dolstra
	--enable-gc is given.
2010-10-22	* Make building against the Boehm GC a configure option.	Eelco Dolstra

2010-10-04	* If std::tr1::unordered_set is unavailable, use std::set.	Eelco Dolstra

2010-08-27	(no commit message)	Eelco Dolstra

2010-08-12	* Urgh, this was supposed to go in the trunk...	Eelco Dolstra

2010-08-12	* Don't link against pthreads. This was added way back in r211	Eelco Dolstra
	because Berkeley DB needed it on some platforms, but we don't use BDB anymore. On FreeBSD, if you link against pthreads, then the main thread gets a 2 MB stack which cannot be overriden (it ignores "ulimit -s"): http://www.mail-archive.com/freebsd-hackers@freebsd.org/msg62445.html This is not enough for Nix. For instance, the garbage collector can fail if there is a pathologically deep chain of references (http://hydra.nixos.org/build/556199). 2 MB is also not enough for many Nix expressions. Arguably the garbage collector shouldn't use recursion, because in NixOS unprivileged users can DOS the garbage collector by creating a sufficiently deeply nested chain of references. But getting rid of recursion is a bit harder.