| Age | Commit message (Collapse) | Author |
|---|
|
this isn't strictly necessary, but it'll make it a lot easier to put the
generated files used by the autoconf build system in this directory too.
doing this now already will make the meson transition a lot easier later
Change-Id: I5fb39eade2ff88b6093c9ee436c9e8db793e9448
|
|
this would make meson build compatibility unnecessarily hard and
the cli does not change often enough to justify this complexity.
Change-Id: I17b1870cdf8538feeaa01a9945db97af2175a642
|
|
not sure why this was done the way it was considering that includes are
a feature the doc toolchain had previously. let's just always have some
kind of entry for the upcoming release in the dev manual builds even if
that means having a completely empty release notes chapter.
the release notes generation script isn't entirely functional right now
due to pre-commit hooks, but it's good enough for time being. we need a
better release process for notes anyway.
Change-Id: Ifda6912cf5233db013f72a30247a62d6f22b1565
Change-Id: I9eb347ec4aabc5be2b816ff0fd3e4be45f93b934
|
|
mdbook already does include processing of its own, and the custom
processing code has always admitted as much. we don't need it for
the mdbook build at this point if we run our preprocessors in the
right order, and maybe we can even have mdbook to return complete
pages to us that we only have to pass to lowdown without any more
preprocessing of our own.
Change-Id: Icd978acbc3b1e215fee8f062c53ab2cb2a222ab1
|
|
We're not entirely clear on why the links preprocessor has to be done
*before* rather than after, but we assume it is probably that as a
builtin preprocessor it does some processing on the raw book source,
and not just the JSON data.
Also a real use for Python pattern matching? I know I was surprised too.
Change-Id: Ibe8b59e7b5bd5f357a655d8b4c5f0b0f58a67d6b
|
|
lowdown has an option to disable this behavior. use it.
Change-Id: I06d4201b7f528021ddb8e94ac6baff385402e080
|
|
we'll want to use these for the meson builds, and probably eventually
rewrite them in something that isn't plain shell. diffoscope confirms
that out/share and doc/share are equal before and after these changes
Change-Id: I49aa418fc8615cad86d67328e08c28a7405ec952
|
|
hacking changelog-d to support not just github but also forgejo and
gerrit is a lot more complicated than it's worth, even moreso since
the entire thing can just as well be done with ~60 lines of python.
this new script is also much cheaper to instantiate (being python),
so having it enabled in all shells is far less of a hassle.
we've also adjusted existing release notes that referenced a gerrit
cl to auto-link to the cl in question, making the diff a bit bigger
closes https://git.lix.systems/lix-project/lix/issues/176
Change-Id: I8ba7dd0070aad9ba4474401731215fcf5d9d2130
|
|
Docs build: depend on locally built nix executable and not installed one
(cherry picked from commit ca72e3e7e8f69526f028475a7a9b40812da1acdd)
===
includes changes from (because not doing so removes manpages):
Merge pull request #9976 from alois31/restore-manual-pages
Restore manual pages
(cherry picked from commit d3c1997127e0fc08576e842b2bfe046d8a28d2f4)
Change-Id: I685ff16163ac552a1754570c03c992c63a461d50
|
|
Automatically compile hand-written release notes with `changelog-d`
(cherry picked from commit 928f0c13414d20c1af88b30bd6700fd730ee0bab)
Change-Id: Ia0685835c52edf185b64dd696b19305746c077e5
|
|
|
|
This is done in roughly the same way builtin functions are documented.
Also auto-link experimental features for primops, subsuming PR #8371.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
|
|
it's probably better not to show the manifest file documentation in the
command-specific pages, because these are implementation details that are not really practically useful.
this means no additional hassle for building the manual, but clutters
the table of contents a bit.
|
|
|
|
As requested by @fricklerhandwerk.
|
|
They are put in the manual separate pages under the new overarching
description of experimental features.
The settings page just lists the valid experimental feature names (so
people know what a valid setting entry looks like), with links to those
pages. It doesn't attempt to describe each experimental feature as that
is too much information for the configuration settings section.
|
|
Instead of constructing a markdown list in C++ (which involved all sorts
of nasty string literals), export some JSON and assemble it with the
manual build system.
Besides following the precedent set with other dumped data, this is a
better separate of content and presentation; if we decide for example we
want to display this information in a different way, or in a different
section of the manual, it will become much easier to do so.
|
|
otherwise the order of found `.md` files will influence if `@docroot@`
is replaced before them being included, which may mess up relative
links.
the weirdest thing about it is that the mess-up happens
deterministically on macOS, but deterministically doesn't happen on
Linux!
|
|
Documentation on "classic" commands with many sub-commands are
notoriously hard to discover due to lack of overview and anchor links.
Additionally the information on common options and environment variables
is not accessible offline in man pages, and therefore often overlooked
by readers.
With this change, each sub-command of nix-store and nix-env gets its
own page in the manual (listed in the table of contents), and each own
man page.
Also, man pages for each subcommand now (again) list common options
and environment variables. While this makes each page quite long and
some common parameters don't apply, this should still make it easier
to navigate as that additional information was not accessible on the
command line at all.
It is now possible to run 'nix-store --<subcommand> --help` to display
help pages for the given subcommand.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
|
|
|
|
|
|
|
|
The motivation is as stated in issue #7814: even though the the C++ API
is internal and unstable, people still want it to be well documented for
sake of learning, code review, and other purposes that aren't predicated
on it being stable.
Fixes #7814
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
|
|
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
|
|
|
|
|
|
These were accidentally logged and do not need to appear in make's
log output.
|
|
|
|
... before the link checking "output" was added, bumping the
html output into a subdirectory.
|
|
This way the links are clearly within the manual (ie not absolute paths),
while allowing snippets to reference the documentation root reliably,
regardless of at which base url they're included.
|
|
mdbook-linkcheck is not consistent about its warning setting.
It disables some warnings, but not the warnings about lack of
fragment checking support; hence the extra filtering.
|
|
this is a follow-up on e7dcacb.
most links are relative and this should not be too much of a detriment.
|
|
|
|
this simplifies the setup a lot, and avoids weird looking `./file.md`
links showing up.
it also does not show regular URLs any more. currently the command
reference only has few of them, and not showing them in the offline
documentation is hopefully not a big deal.
instead of building more special-case solutions, clumsily preprocessing
the input, or issuing verbal rules on dealing with URLs, should better
be solved sustainably by not rendering relative links in `lowdown`:
https://github.com/kristapsdz/lowdown/issues/105
|
|
|
|
The current docs are all "how to do things" and no "what is Nix" or "why
are things the way they are".
I see lots of misconception on the wider internet, and I also think we
would benefit from a "living document" to answer some questions people
currently turn to the thesis for.
I think a new section of the manual can address all these issues.
|
|
it is out of date, all over the place in level of detail, is really
about `nixpkgs`, and in general instructions should not be part of
a reference manual.
also:
- update redirects and internal links
- use "Nix language" consistently
|
|
Python is only pulled into the build closure by Mercurial, which might end up being removed.
Let’s port the script to jq, which is more likely to stay.
|
|
It is now possible to use the following syntax to insert anchors into the text:
[]{#anchor-name}
The anchor will allow linking to the location it is placed by appending #anchor-name to the URL.
Additionally, it is possible to create a link pointing to its own location by adding text between the square brackets:
[`--add-root`]{#opt-add-root}
|
|
|
|
|
|
Fixes #5337.
|
|
|
|
Fixes #4476.
Fixes #5231.
|
|
|
|
Install failure is observed when we try to install
into inplace location as non-root:
```
$ LANG=C make install DESTDIR=$PWD/__i__ V=1
RUST_LOG=warn mdbook build doc/manual -d /usr/share/doc/nix/manual
2021-08-28 13:29:58 [ERROR] (mdbook::utils): Error: Rendering failed
2021-08-28 13:29:58 [ERROR] (mdbook::utils): Caused By: Unexpected error when constructing destination path
2021-08-28 13:29:58 [ERROR] (mdbook::utils): Caused By: Permission denied (os error 13)
make: *** [doc/manual/local.mk:98: /usr/share/doc/nix/manual/index.html] Error 101
```
The change is to prefix paths with `$(DESTDIR)`.
|
|
doc/manual: don't need to copy `highlight.js` manually
|
|
Signed-off-by: Pamplemousse <xav.maso@gmail.com>
|
|
|
|
- Separate the generation of the manpages from their installation
- Make sure that `make` generates the manpages
- Make sure that `make install` installs them
Fix #5051
|
