| Age | Commit message (Collapse) | Author |
|---|
|
Update install-systemd-multi-user.sh
|
|
|
|
Check if NIX_LINK_NEW exists instead of checking that NIX_LINK doesn't exist
|
|
For brand new installations, neither NIX_LINK_NEW
(`$XDG_STATE_HOME/nix/profile` or `~/.local/state/nix/profile`), nor
NIX_LINK (`~/.nix-profile`) will exist.
This restores functionality to nix-env, which is relied upon by GitHub
Actions such as https://github.com/cachix/cachix-action and the Nixpkgs
EditorConfig (and other) CI.
|
|
One of our CI machines installs Nix via the official script and then
sources the nix-profile.sh script to setup the environment. However, it
doesn't have XDG_STATE_HOME set, which causes sourcing the script to
fail.
|
|
XDG Base Directory is a standard for locations for storing various
files. Nix has a few files which seem to fit in the standard, but
currently use a custom location directly in the user's ~, polluting
it:
- ~/.nix-profile
- ~/.nix-defexpr
- ~/.nix-channels
This commit adds a config option (use-xdg-base-directories) to follow
the XDG spec and instead use the following locations:
- $XDG_STATE_HOME/nix/profile
- $XDG_STATE_HOME/nix/defexpr
- $XDG_STATE_HOME/nix/channels
If $XDG_STATE_HOME is not set, it is assumed to be ~/.local/state.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Tim Fenney <kodekata@gmail.com>
Co-authored-by: pasqui23 <pasqui23@users.noreply.github.com>
Co-authored-by: Artturin <Artturin@artturin.com>
Co-authored-by: John Ericson <Ericson2314@Yahoo.com>
|
|
Among all the characters that are allowed in a URL, both the percentage
sign "%" and the single quotation mark "'" needs escaping when written
as a environment variable in a systemd service file. While the single
quotation mark may be rare, the percentage sign is widely used to escape
characters in a URL. This is especially common in proxy setting, where
username and password may contain special characters that need
percentage escaping. This patch applies the following replacements:
% -> %%
' -> \'
|
|
The `fish_add_path` function is only available for fish 3.2.0 or newer,
and not on older versions.
This commit adds an alternative way to update the PATH when
`fish_add_path` does not exist.
|
|
f06f810 incorrectly introduces a boolean flip, resulting in a senseless
poly_user_note_set even though the user comment has been set correctly.
|
|
let installer blurb to to community page
|
|
being too specific about it requires more maintenance (or otherwise
produced more confusion and churn), since these points of contact change
over time.
|
|
since the installer prompts users to file issues, labelling them
automatically should reduce triaging effort significantly.
|
|
|
|
Previously the MANPATH was set even if MANPATH was empty beforehand
which resulted in a MANPATH of only ~/.nix-profile/share/man which
omitted the default man page directory (commonly /opt/local/share/man)
from man page results.
|
|
Older versions of Fish (such as those bundled with Ubuntu LTS 22.04) do
not support return outside of functions. We need to use the equivalent
exit instead.
|
|
|
|
Before this patch, installing Nix using the Fish shell did not
work because Fish wasn't configured to add Nix to the PATH. Some
options in #1512 offered workarounds, but they typically involve
extra plugins or packages.
This patch adds native, out-of-the-box support for the Fish shell.
Note that Fish supports a `conf.d` directory, which is intended
for exactly use cases like this: software projects distributing
shell snippets. This patch takes advantage of it. The installer
doesn't append any Nix loader behavior to any Fish config file.
Because of that, the uninstall process is smooth and a reinstall
obliterates the existing nix.fish files that we place instead of
bothering the user with a backup / manual removal.
Both single-user and multi-user cases are covered. It has been
tested on Ubuntu, and a Mac with MacPorts, homebrew, and the
Fish installer pkg.
Closes #1512
Co-authored-by: Graham Christensen <graham@grahamc.com>
|
|
installer: Jeeze -> Oh no
|
|
A [recent-ish change](https://github.com/NixOS/nix/pull/6676) logs a warning when a potentially counterintuitive situation happens.
This now causes the multi-user installer to [emit a warning](https://github.com/NixOS/nixpkgs/issues/189043) when it's doing
the "seed the Nix database" step via a low-level `nix-store --load-db` invocation.
`nix-store` functionality implementations don't actually use profiles or channels or homedir as far as i can tell. So why are we
hitting this code at all?
Well, the current command approach for functionality here builds a [fat `nix` binary](https://github.com/NixOS/nix/blob/master/src/nix/local.mk#L23-L26) which has _all_ the functionality of
previous individual binaries (nix-env, nix-store, etc) bundled in, then [uses the invocation name](https://github.com/NixOS/nix/blob/master/src/nix/main.cc#L274-L277) to select the
set of commands to expose. `nix` itself has this behavior, even when just trying to parse the (sub)command and arguments:
```
dave @ davembp2
$ nix
error: no subcommand specified
Try 'nix --help' for more information.
dave @ davembp2
$ sudo nix
warning: $HOME ('/Users/dave') is not owned by you, falling back to the one defined in the 'passwd' file
error: no subcommand specified
Try 'nix --help' for more information.
dave @ davembp2
$ HOME=~root sudo nix
error: no subcommand specified
Try 'nix --help' for more information.
```
This behavior can also be seen pretty easily with an arbitrary `nix-store` invocation:
```
dave @ davembp2
$ nix-store --realize
dave @ davembp2
$ sudo nix-store --realize # what installer is doing now
warning: $HOME ('/Users/dave') is not owned by you, falling back to the one defined in the 'passwd' file
dave @ davembp2
$ sudo HOME=~root nix-store --realize # what this PR effectively does
dave @ davembp2
$
```
|
|
|
|
|
|
|
|
|
|
This fixes the case where $TMPDIR doesn't end in a slash.
|
|
Allow installing multi-user as root on macOS and Linux
|
|
|
|
|
|
|
|
It was accidentally triggering the auto-chroot code path because
/nix/var/nix didn't exist.
Fixes #6790.
|
|
|
|
User on Matrix reported install problems which presented as
"vifs:editing error" which we traced back to vim griping about an
existing swap file. When opened interactively, it did this:
E325: ATTENTION
Found a swap file by the name "/etc/.fstab.swp"
owned by: root dated: Sön Apr 24 16:54:10 2022
file name: /private/etc/fstab
modified: YES
user name: root host name: MBP.local
process ID: 1698
While opening file "/etc/fstab"
dated: Sön Apr 24 16:56:27 2022
NEWER than swap file!
...
|
|
It looks like the `--noplugin` flag added in #5489 wasn't enough to
skirt this class of vim-init error, so this is swing 2 at a full fix.
Fixes #6462.
|
|
On Linux a user can go through all the way through the multi-user install
and find out at the end that they now have to manually configure their
init system to launch the nix daemon.
I suspect that for a significant number of users this is not
what they wanted. They might prefer a single-user install.
Now they have to manually uninstall nix before they can
go through the single-user install.
This introduces a confirmation dialog before the install
in that specific situation to make sure that they want to proceed.
See also: https://github.com/NixOS/nix/issues/4999#issuecomment-1064188080
This closes #4999 but rejecting it and closing that issue anyways
would also be valid.
|
|
|
|
|
|
sytemd-tmpfiles -> systemd-tmpfiles
|
|
nix-daemon.conf.in: add tmpfiles file to create nix/daemon-socket directory
|
|
We need to pass -P to ensure that symlinks are copied correctly. Fixes #6303.
|
|
/etc/tmpfiles.d/nix-daemon.conf, too
While `create_directories()` from install-multi-user.sh seems to already
create parts of the directory structure, it's marked as deprecated, and
it won't hurt also copying over the tmpfiles config and have it execute
once.
|
|
Needed to resolve conflict in case the default GID and UIDs are in use.
|
|
install-darwin: fix mount permission edge-case
|
|
Same as 1fd127a06833c19a5a2965bd41cf4f695773cca6, but applied to a
code path (volume_pass_works -> verify_volume_pass) that the reporting
user didn't hit and wasn't able to trigger manually. I am not certain
but I suspect it will be easier to add prophylactically than to debug
if its absence causes trouble some day.
|
|
Document usage of MANPATH in nix-profile.sh
|
|
While trying to figure out how `nix-env`/`nix profile` work I had a hard
time understand how man pages were being installed.
Took me quite some time to figure this out, thought it might be useful
to others too!
|
|
Fixes #6122, which reports a problem with trying to run the installer
under another user (probably: user is not the disk "owner" and thus
can't mount the volume).
|
|
|
|
|
|
|
|
The script is trying to find chown in a cross-platform-like
way, but there's some sort of deficiency in `command -p` in
the default macOS bash 3.2. It looks like it will just use
whatever PATH is already set, instead of the "default" path.
This attempts to hard-set a PATH via `getconf PATH`. It will
just set an empty PATH if that fails for some reason. A
properly-functioning `command -p` should not care what we
set the PATH to here one way or the other.
Hopefully fixes #5768.
|
|
installer: clarify starting assumption task
|
