lix -

Age	Commit message (Collapse)	Author
2018-10-26	Merge all nix-* binaries into nix	Eelco Dolstra
	These are all symlinks to 'nix' now, reducing the installed size by about ~1.7 MiB.
2018-04-23	Merge branch 'aarch64-armv7' of git://github.com/lheckemann/nix	Shea Levy
	Support extra compatible architectures (#1916)
2018-03-20	Hack to get SSH error messages from build-remote	Eelco Dolstra
	E.g. cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed. cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures Authentication failed.
2018-03-16	build-remote: take extra-platforms into account	Linus Heckemann

2018-03-13	build-remote: Don't substitute the build result	Eelco Dolstra

2018-02-13	Merge branch 'plugins' of https://github.com/shlevy/nix	Eelco Dolstra

2018-02-12	Fix hang in build-remote	Eelco Dolstra

2018-02-08	Add plugins to make Nix more extensible.	Shea Levy
	All plugins in plugin-files will be dlopened, allowing them to statically construct instances of the various Register* types Nix supports.
2018-01-09	nix.conf: builders-use-substitutes	Renzo Carbonara
	Fixes #937
2017-11-25	build-remote: Fix missing log output	aszlig
	The storeUri variable in the build-remote hook is declared very much to the start of the main function and a bunch of lines later, the same variable gets checked via hasPrefix() but it gets assigned after that check when the most suitable machine for the build was choosen. So I guess this was just a typo in d16fd2497374671c92cb877f9570d65783a7 and what we really want is to either checkd the prefix after assigning storeUri or use bestMachine->storeUri directly. I choose the latter, because the former could introduce even more regressions if the try block where the variable gets assigned terminates early. Nevertheless, the reason why the log output didn't work is because hasPrefix() checked for "ssh://" in front of storeUri, but if the storeUri isn't set correctly (or at all), we don't get the log file descriptor set up properly, leading to no log output. I've adjusted the remote-builds test to include a regression test for this, so that we can make sure we get a build output when using remote builds. In addition to that I've tested this with two of my build farms and the build logs are emitted correctly again. Signed-off-by: aszlig <aszlig@nix.build>
2017-10-24	Allow shorter syntax for chroot stores	Eelco Dolstra
	You can now say '--store /tmp/nix' instead of '--store local?root=/tmp/nix'.
2017-10-24	More progress indicator improvements	Eelco Dolstra
	Fixes #1599.
2017-10-24	Progress indicator: Show on what machine we're building	Eelco Dolstra
	E.g. $ nix build nixpkgs.hello --builders 'root@wendy' [1/0/1 built] building hello-2.10 on ssh://root@wendy: checking for minix/config.h... no
2017-10-24	build-remote: Work properly on a chrooted store	Eelco Dolstra

2017-10-24	Handle log messages from build-remote	Eelco Dolstra
	This makes the progress indicator show statuses like "connecting to 'root@machine'".
2017-10-23	Pass all settings to build-remote	Eelco Dolstra
	This ensures that command line flags such as --builders get passed correctly.
2017-10-23	build-remote: Put current load under the store state directory	Eelco Dolstra
	Fixes the error error: opening lock file '/nix/var/nix/current-load/main-lock': Permission denied when using a chroot store.
2017-07-31	Merge branch 'macOS' of https://github.com/davidak/nix	Eelco Dolstra

2017-07-30	Replace Unicode quotes in user-facing strings by ASCII	Jörg Thalheim
	Relevant RFC: NixOS/rfcs#4 $ ag -l \| xargs sed -i -e "/\"/s/’/'/g;/\"/s/‘/'/g"
2017-07-30	replace "OS X" with "macOS"	davidak

2017-07-03	Replace a few bool flags with enums	Eelco Dolstra
	Functions like copyClosure() had 3 bool arguments, which creates a severe risk of mixing up arguments. Also, implement copyClosure() using copyPaths().
2017-05-08	build-remote: Check remote build status	Eelco Dolstra

2017-05-02	build-remote: Fix fallback to other machines when connecting fails	Eelco Dolstra
	Opening an SSHStore or LegacySSHStore does not actually establish a connection, so the try/catch block here did nothing. Added a Store::connect() method to test whether a connection can be established.
2017-05-02	Add an option for specifying remote builders	Eelco Dolstra
	This is useful for one-off situations where you want to specify a builder on the command line instead of having to mess with nix.machines. E.g. $ nix-build -A hello --argstr system x86_64-darwin \ --option builders 'root@macstadium1 x86_64-darwin' will perform the specified build on "macstadium1". It also removes the need for a separate nix.machines file since you can specify builders in nix.conf directly. (In fact nix.machines is yet another hack that predates the general nix.conf configuration file, IIRC.) Note: this option is supported by the daemon for trusted users. The fact that this allows trusted users to specify paths to SSH keys to which they don't normally have access is maybe a bit too much trust...
2017-05-02	Factor out machines.conf parsing	Eelco Dolstra
	This allows hydra-queue-runner to use it.
2017-05-02	build-hook: If there are no machines defined, quit permanently	Eelco Dolstra

2017-05-02	build-remote: Ugly hackery to get build logs to work	Eelco Dolstra
	The build hook mechanism expects build log output to go to file descriptor 4, so do that.
2017-05-01	build-remote: Don't require signatures	Eelco Dolstra
	This restores the old behaviour.
2017-05-01	Support arbitrary store URIs in nix.machines	Eelco Dolstra
	For backwards compatibility, if the URI is just a hostname, ssh:// (i.e. LegacySSHStore) is prepended automatically. Also, all fields except the URI are now optional. For example, this is a valid nix.machines file: local?root=/tmp/nix This is useful for testing the remote build machinery since you don't have to mess around with ssh.
2017-05-01	Remove $NIX_BUILD_HOOK and $NIX_CURRENT_LOAD	Eelco Dolstra
	This is to simplify remote build configuration. These environment variables predate nix.conf. The build hook now has a sensible default (namely build-remote). The current load is kept in the Nix state directory now.
2017-05-01	build-remote: Don't copy the .drv closure	Eelco Dolstra
	Since build-remote uses buildDerivation() now, we don't need to copy the .drv file anymore. This greatly reduces the set of input paths copied to the remote side (e.g. from 392 to 51 store paths for GNU hello on x86_64-darwin).
2017-05-01	Pass verbosity level to build hook	Eelco Dolstra

2017-03-16	ssh:// -> ssh-ng://, legacy-ssh:// -> ssh://	Eelco Dolstra

2017-03-16	copyPaths(): Use queryValidPaths() to reduce SSH latency	Eelco Dolstra

2017-03-03	build-remote: Don't use a SSH master	Eelco Dolstra
	This is unnecessary because we make only one connection.
2017-03-03	build-remote: Fix passing SSH key	Eelco Dolstra

2017-03-03	build-remote: Misc cleanup	Eelco Dolstra

2017-02-07	Merge branch 'nix-copy-closure-c++' of https://github.com/shlevy/nix	Eelco Dolstra

2017-01-26	openLockFile: Return an AutoCloseFD	Eelco Dolstra

2017-01-24	Hopefully fix build on older GCC	Eelco Dolstra
	http://hydra.nixos.org/build/46805140
2017-01-24	Fix typo	Eelco Dolstra

2017-01-24	build-remote: Use futimes instead of futimens on APPLE	Shea Levy

2017-01-20	nix-copy-closure: Implement in C++.	Shea Levy
	Tests fail currently because the database is not given proper hashes in the VM
2017-01-10	build-remote: Don't use C++ streams to read the conf file	Shea Levy

2017-01-10	build-remote: Use std::set for feature sets	Shea Levy

2016-11-10	build-remote: replace strtoull with stoull to take advantage of C++ error ↵	Shea Levy
	handling
2016-11-10	build-remote: Implement in C++	Shea Levy