| Age | Commit message (Collapse) | Author |
|---|
|
This splits `ignoreException` into `ignoreExceptionExceptInterrupt`
(which ignores all exceptions except `Interrupt`, which indicates a
SIGINT/CTRL-C) and `ignoreExceptionInDestructor` (which ignores all
exceptions, so that destructors do not throw exceptions).
This prevents many cases where Nix ignores CTRL-C entirely.
See: https://github.com/NixOS/nix/issues/7245
Upstream-PR: https://github.com/NixOS/nix/pull/11618
Change-Id: Ie7d2467eedbe840d1b9fa2e88a4e88e4ab26a87b
|
|
These stack traces kind of suck for the reasons mentioned on the
CppTrace page here (no symbols for inline functions is a major one):
https://github.com/jeremy-rifkin/cpptrace
I would consider using CppTrace if it were packaged, but to be honest, I
think that the more reasonable option is actually to move entirely to
out-of-process crash handling and symbolization.
The reason for this is that if you want to generate anything of
substance on SIGSEGV or really any deadly signal, you are stuck in
async-signal-safe land, which is not a place to be trying to run a
symbolizer. LLVM does it anyway, probably carefully, and chromium *can*
do it on debug builds but in general uses crashpad:
https://source.chromium.org/chromium/chromium/src/+/main:base/debug/stack_trace_posix.cc;l=974;drc=82dff63dbf9db05e9274e11d9128af7b9f51ceaa;bpv=1;bpt=1
However, some stack traces are better than *no* stack traces when we get
mystery exceptions falling out the bottom of the program. I've also
promoted the path for "mystery exceptions falling out the bottom of the
program" to hard crash and generate a core dump because although there's
been some months since the last one of these, these are nonetheless
always *atrociously* diagnosed.
We can't improve the crash handling further until either we use Crashpad
(which involves more C++ deps, no thanks) or we put in the ostensibly
work in progress Rust minidump infrastructure, in which case we need to
finish full support for Rust in libutil first.
Sample report:
Lix crashed. This is a bug. We would appreciate if you report it at https://git.lix.systems/lix-project/lix/issues with the following information included:
Exception: std::runtime_error: lol
Stack trace:
0# nix::printStackTrace() in /home/jade/lix/lix3/build/src/nix/../libutil/liblixutil.so
1# 0x000073C9862331F2 in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
2# 0x000073C985F2E21A in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
3# 0x000073C985F2E285 in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
4# nix::handleExceptions(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::function<void ()>) in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
5# 0x00005CF65B6B048B in /home/jade/lix/lix3/build/src/nix/nix
6# 0x000073C985C8810E in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
7# __libc_start_main in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
8# 0x00005CF65B610335 in /home/jade/lix/lix3/build/src/nix/nix
Change-Id: I1a9f6d349b617fd7145a37159b78ecb9382cb4e9
|
|
This didn't really feel so worth it afterwards, but I did untangle a
bunch of stuff that should not have been tangled.
The general gist of this change is that variant bullshit was causing a
bunch of compile time, and it seems like the only way to deal with
variant induced compile time is to keep variant types out of headers.
Explicit template instantiation seems to do nothing for them.
I also seem to have gotten some back-end time improvement from
explicitly instantiating regex, but I don't know why. There is no
corresponding front-end time improvement from it: regex is still at the
top of the sinners list.
**** Templates that took longest to instantiate:
15231 ms: std::basic_regex<char>::_M_compile (28 times, avg 543 ms)
15066 ms: std::__detail::_Compiler<std::regex_traits<char>>::_Compiler (28 times, avg 538 ms)
12571 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_disjunction (28 times, avg 448 ms)
12454 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_alternative (28 times, avg 444 ms)
12225 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_term (28 times, avg 436 ms)
11363 ms: nlohmann::basic_json<>::parse<const char *> (21 times, avg 541 ms)
10628 ms: nlohmann::basic_json<>::basic_json (109 times, avg 97 ms)
10134 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_atom (28 times, avg 361 ms)
Back-end time before messing with the regex:
**** Function sets that took longest to compile / optimize:
8076 ms: void boost::io::detail::put<$>(boost::io::detail::put_holder<$> cons... (177 times, avg 45 ms)
4382 ms: std::_Rb_tree<$>::_M_erase(std::_Rb_tree_node<$>*) (1247 times, avg 3 ms)
3137 ms: boost::stacktrace::detail::to_string_impl_base<boost::stacktrace::de... (137 times, avg 22 ms)
2896 ms: void boost::io::detail::mk_str<$>(std::__cxx11::basic_string<$>&, ch... (177 times, avg 16 ms)
2304 ms: std::_Rb_tree<$>::_M_get_insert_hint_unique_pos(std::_Rb_tree_const_... (210 times, avg 10 ms)
2116 ms: bool std::__detail::_Compiler<$>::_M_expression_term<$>(std::__detai... (112 times, avg 18 ms)
2051 ms: std::_Rb_tree_iterator<$> std::_Rb_tree<$>::_M_emplace_hint_unique<$... (244 times, avg 8 ms)
2037 ms: toml::result<$> toml::detail::sequence<$>::invoke<$>(toml::detail::l... (93 times, avg 21 ms)
1928 ms: std::__detail::_Compiler<$>::_M_quantifier() (28 times, avg 68 ms)
1859 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump(nlohmann::js... (41 times, avg 45 ms)
1824 ms: std::_Function_handler<$>::_M_manager(std::_Any_data&, std::_Any_dat... (973 times, avg 1 ms)
1810 ms: std::__detail::_BracketMatcher<$>::_BracketMatcher(std::__detail::_B... (112 times, avg 16 ms)
1793 ms: nix::fetchers::GitInputScheme::fetch(nix::ref<$>, nix::fetchers::Inp... (1 times, avg 1793 ms)
1759 ms: std::_Rb_tree<$>::_M_get_insert_unique_pos(std::__cxx11::basic_strin... (281 times, avg 6 ms)
1722 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (19 times, avg 90 ms)
1677 ms: boost::io::basic_altstringbuf<$>::overflow(int) (194 times, avg 8 ms)
1674 ms: std::__cxx11::basic_string<$>::_M_mutate(unsigned long, unsigned lon... (249 times, avg 6 ms)
1660 ms: std::_Rb_tree_node<$>* std::_Rb_tree<$>::_M_copy<$>(std::_Rb_tree_no... (304 times, avg 5 ms)
1599 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (19 times, avg 84 ms)
1568 ms: void std::__detail::_Compiler<$>::_M_insert_bracket_matcher<$>(bool) (112 times, avg 14 ms)
1541 ms: std::__shared_ptr<$>::~__shared_ptr() (531 times, avg 2 ms)
1539 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump_escaped(std:... (41 times, avg 37 ms)
1471 ms: void std::__detail::_Compiler<$>::_M_insert_character_class_matcher<... (112 times, avg 13 ms)
After messing with the regex (notice std::__detail::_Compiler vanishes
here, but I don't know why):
**** Function sets that took longest to compile / optimize:
8054 ms: void boost::io::detail::put<$>(boost::io::detail::put_holder<$> cons... (177 times, avg 45 ms)
4313 ms: std::_Rb_tree<$>::_M_erase(std::_Rb_tree_node<$>*) (1217 times, avg 3 ms)
3259 ms: boost::stacktrace::detail::to_string_impl_base<boost::stacktrace::de... (137 times, avg 23 ms)
3045 ms: void boost::io::detail::mk_str<$>(std::__cxx11::basic_string<$>&, ch... (177 times, avg 17 ms)
2314 ms: std::_Rb_tree<$>::_M_get_insert_hint_unique_pos(std::_Rb_tree_const_... (207 times, avg 11 ms)
1923 ms: std::_Rb_tree_iterator<$> std::_Rb_tree<$>::_M_emplace_hint_unique<$... (216 times, avg 8 ms)
1817 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (18 times, avg 100 ms)
1816 ms: toml::result<$> toml::detail::sequence<$>::invoke<$>(toml::detail::l... (93 times, avg 19 ms)
1788 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump(nlohmann::js... (40 times, avg 44 ms)
1749 ms: std::_Rb_tree<$>::_M_get_insert_unique_pos(std::__cxx11::basic_strin... (278 times, avg 6 ms)
1724 ms: std::__cxx11::basic_string<$>::_M_mutate(unsigned long, unsigned lon... (248 times, avg 6 ms)
1697 ms: boost::io::basic_altstringbuf<$>::overflow(int) (194 times, avg 8 ms)
1684 ms: nix::fetchers::GitInputScheme::fetch(nix::ref<$>, nix::fetchers::Inp... (1 times, avg 1684 ms)
1680 ms: std::_Rb_tree_node<$>* std::_Rb_tree<$>::_M_copy<$>(std::_Rb_tree_no... (303 times, avg 5 ms)
1589 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (18 times, avg 88 ms)
1483 ms: non-virtual thunk to boost::wrapexcept<$>::~wrapexcept() (181 times, avg 8 ms)
1447 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump_escaped(std:... (40 times, avg 36 ms)
1441 ms: std::__shared_ptr<$>::~__shared_ptr() (496 times, avg 2 ms)
1420 ms: boost::stacktrace::basic_stacktrace<$>::init(unsigned long, unsigned... (137 times, avg 10 ms)
1396 ms: boost::basic_format<$>::~basic_format() (194 times, avg 7 ms)
1290 ms: std::__cxx11::basic_string<$>::_M_replace_cold(char*, unsigned long,... (231 times, avg 5 ms)
1258 ms: std::vector<$>::~vector() (354 times, avg 3 ms)
1222 ms: std::__cxx11::basic_string<$>::_M_replace(unsigned long, unsigned lo... (231 times, avg 5 ms)
1194 ms: std::_Rb_tree<$>::_M_get_insert_hint_unique_pos(std::_Rb_tree_const_... (49 times, avg 24 ms)
1186 ms: bool tao::pegtl::internal::sor<$>::match<$>(std::integer_sequence<$>... (1 times, avg 1186 ms)
1149 ms: std::__detail::_Executor<$>::_M_dfs(std::__detail::_Executor<$>::_Ma... (70 times, avg 16 ms)
1123 ms: toml::detail::sequence<$>::invoke(toml::detail::location&) (69 times, avg 16 ms)
1110 ms: nlohmann::json_abi_v3_11_3::basic_json<$>::json_value::destroy(nlohm... (55 times, avg 20 ms)
1079 ms: std::_Function_handler<$>::_M_manager(std::_Any_data&, std::_Any_dat... (541 times, avg 1 ms)
1033 ms: nlohmann::json_abi_v3_11_3::detail::lexer<$>::scan_number() (20 times, avg 51 ms)
Change-Id: I10af282bcd4fc39c2d3caae3453e599e4639c70b
|
|
This will stop printing stuff to dumb terminals that they don't support.
I've overall audited usage of isatty and replaced the ones with intent
to mean "is a Real terminal" with checking for that. I've also caught a
case of carelessly assuming "is a tty" means "should be colour" in
nix-env.
Change-Id: I6d83725d9a2d932ac94ff2294f92c0a1100d23c9
|
|
it's only used once, and even that one use is highly questionable. more
instances of warnOnce should be much more principled than this has been
Change-Id: I5856570c99cb44462e700d753d0c706a5db03c4b
|
|
This reverts commit 9f16a20f3d35dbc13ba6c8830745e9fc40d408eb.
Since c55e93ca2, the original reason for reverting d003dcd7f
no longer applies.
Change-Id: If88f8555a6060d0530dcfecdf55afaa40afd1ad9
|
|
Previously, the progress bar had two subtly different states in which the bar
would not actually render, both with their own shortcomings: inactive (which
was irreversible) and paused (reversible, but swallowing logs). Furthermore,
there was no way of resetting the statistics, so a very bad solution was
implemented (243c0f18dae2a08ea0e46f7ff33277c63f7506d7) that would create a new
logger for each line of the repl, leaking the previous one and discarding the
value of printBuildLogs. Finally, if stderr was not attached to a TTY, the
update thread was started even though the logger was not active, violating the
invariant required by the destructor (which is not observed because the logger
is leaked).
In this commit, the two aforementioned states are unified into a single one,
which can be exited again, correctly upholds the invariant that the update
thread is only running while the progress bar is active, and does not swallow
logs. The latter change in behavior is not expected to be a problems in the
rare cases where the paused state was used before, since other loggers (like
the simple one) don't exhibit it anyway. The startProgressBar/stopProgressBar
API is removed due to being a footgun, and a new method for properly resetting
the progress is added.
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Change-Id: I2b7c3eb17d439cd0c16f7b896cfb61239ac7ff3a
|
|
Change-Id: Icc8a15090c77f54ea7d9220aadedcd4a19922814
|
|
copy-constructing or assigning from pid_t can easily lead to duplicate
Pid instances for the same process if a pid_t was used carelessly, and
Pid itself was copy-constructible. both could cause surprising results
such as killing processes twice (which could become very problemantic,
but luckily modern systems don't reuse PIDs all that quickly), or more
than one piece of the code believing it owns a process when neither do
Change-Id: Ifea7445f84200b34c1a1d0acc2cdffe0f01e20c6
|
|
Change-Id: I3137cc140590001fe7ba542844e735944a0a9255
|
|
Change-Id: Ic1f68e6af658e94ef7922841dd3ad4c69551ef56
|
|
Change-Id: I77095b9d37e85310075bada7a076ccd482c28e47
|
|
This reverts commit d003dcd7f4ce6b16c3494398a4edd36e668a1b46.
d0390b5cf¹ bumped the default verbosity of nix3 commands, making this
change obsolete.
[1]: d0390b5cf2d232febaa89aa6d8b07c547513a460
Change-Id: I1ddc36ea4514cd8d2855ff334accf6e98c210879
|
|
The interrupt-blocking code was originally introduced 20 years ago so that
trying to log an error message does not result in an interrupt exception being
thrown and then going unhandled (c8d3882cdc8f9e22c58af285c1996265c1af75d5).
However, the logging code does not check for interrupts any more
(054be5025762c5e1c7e853c4fa5d7eed8da1727f), so this reasoning is no longer
applicable. Delete this code so that later interrupts are unblocked again, for
example in the next line entered into the repl.
Closes: https://git.lix.systems/lix-project/lix/issues/296
Change-Id: I48253f5f4272e75001148c13046e709ef5427fbd
|
|
requiring *two* --verbose to print extra information on --version is a
weird flex
Change-Id: I05d043da1bf583f34e9d1fc206144ea4ca9a859d
|
|
Change-Id: I014ff24b900c0b9a48b7a63c8bb8b86cde3ebe54
Signed-off-by: Raito Bezarius <raito@lix.systems>
|
|
This commit adds several meson.build, which successfully build and
install Lix executables, libraries, and headers. Meson does not yet
build docs, Perl bindings, or run tests, which will be added in
following commits. As such, this commit does not remove the existing
build system, or make it the default, and also as such, this commit has
several FIXMEs and TODOs as notes for what should be done before the
existing autoconf + make buildsystem can be removed and Meson made the
default. This commit does not modify any source files.
A Meson-enabled build is also added as a Hydra job, and to
`nix flake check`.
Change-Id: I667c8685b13b7bab91e281053f807a11616ae3d4
|
|
Copies part of the changes of ac89bb064aeea85a62b82a6daf0ecca7190a28b7
Change-Id: I9ce601875cd6d4db5eb1132d7835c5bab9f126d8
|
|
(cherry picked from commit 2a8fe9a93837733e9dd9ed5c078734a35b203e14)
Change-Id: I71dadfef6b24d9272b206e9e2c408040559d8a1c
|
|
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
(cherry picked from commit c6a89c1a1659b31694c0fbcd21d78a6dd521c732)
Change-Id: Iced91ba4e00ca9e801518071fb43798936cbd05a
|
|
Support cross compiling to BSD and CI it
(cherry picked from commit 1f3fc08c5994ca69c84c9e745d59ec2bb2fd820a)
Change-Id: I415e92952afc661cfb5ef91a76c0637678a04a19
|
|
libutil is a dependency of libstore, so it should always be
initialized as such.
libutil is also a dependency of libmain. Being explicit about this
dependency might be good, but not worth the slight code complexity
until the library structure gets more advanced.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
|
|
Quote
Why not initLibExpr()? initGC() is essentially that, but
detectStackOverflow is not an instance of the init function concept, as
it may have to be invoked more than once per process.
Furthermore, renaming initGC to initLibExpr is more trouble than it's
worth at this time.
|
|
This code is bad. We shouldn't unset variables in programs whose
children may need them. Fixing one issue at a time, so postponing.
See https://github.com/NixOS/nix/issues/7731
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
|
|
It is required for the sandbox, which is a libstore responsibility;
not just libmain.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
|
|
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
|
|
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
The goal of this reordering is to make initLibStore self-sufficient
in a following commit.
|
|
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Using libstore without loading the config file is risky, as sqlite
may then be misconfigured. See https://github.com/cachix/cachix/issues/475
|
|
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
|
|
Print the store paths to be fetched sorted by StorePath name()
|
|
Presently when nix says something like:
```
these 486 paths will be fetched (511.54 MiB download, 6458.64 MiB unpacked):
...path1
...path2
...path3
...
...
...path486
```
It sorts path1, path2, path3, ..., path486 in lexicographic order of the
store path.
After this commit, nix will show path1, path2, path3, ..., path486 sorted by
StorePath name() (basically everything after the hash) rather than the store path.
This makes it easier to review what exactly is being downloaded at a glance,
especially when many paths need to be fetched.
|
|
|
|
This reverts commit 9b33ef3879a764bed4cc2404a08344c3a697a646.
|
|
This reverts commit a75b7ba30f1e4f8b15e810fd18e63ee9552e0815, reversing
changes made to 9af16c5f742300e831a2cc400e43df1e22f87f31.
|
|
|
|
|
|
Prevent bugs like https://github.com/cachix/cachix/pull/477
|
|
`savedArgv` is not accessible by plugins when defined in main binary.
Moving it into one of the nix lib fix the problem.
|
|
In particular, the progress bar was interfering with 'less' rendering
in '--help' (e.g. run 'nix --help' and hit '/' to search).
|
|
|
|
|
|
Disables the SA_RESTART behavior on macOS which causes:
> Restarting of pending calls is requested by setting the SA_RESTART bit
> in sa_flags. The affected system calls include read(2), write(2),
> sendto(2), recvfrom(2), sendmsg(2) and recvmsg(2) on a communications
> channel or a slow device (such as a terminal, but not a regular file)
> and during a wait(2) or ioctl(2).
From: https://man.openbsd.org/sigaction#SA_RESTART
This being set on macOS caused a bug where read() calls to the daemon
socket were blocking after a SIGINT was received. As a result,
checkInterrupt was never reached even though the signal was received
by the signal handler thread.
On Linux, SA_RESTART is disabled by default. This probably effects
other BSDs but I don’t have the ability to test it there right now.
|
|
There is a correctnes issue here, but #3724 will fix that. This is just
a cleanup for brevity's sake.
|
|
Starts progress on #5729.
The idea is that we should not have these default methods throwing
"unimplemented". This is a small step in that direction.
I kept `addTempRoot` because it is a no-op, rather than failure. Also,
as a practical matter, it is called all over the place, while doing
other tasks, so the downcasting would be annoying.
Maybe in the future I could move the "real" `addTempRoot` to `GcStore`,
and the existing usecases use a `tryAddTempRoot` wrapper to downcast or
do nothing, but I wasn't sure whether that was a good idea so with a
bias to less churn I didn't do it yet.
|
|
|
|
Also use std::string_view in a few more places.
|
|
https://hydra.nixos.org/build/161439329
|
|
Before this change, stdout was closed after the pager exits. This is
fine for non-interactive commands where we want to exit right after
the pager exits anyways, but for interactive things (e.g. nix repl)
this breaks the output after we quit the pager.
Keep the initial stdout fd as part of RunPager, and restore it in
RunPager::~RunPager using dup2.
|
|
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
|
|
Signed-off-by: Arthur Gautier <baloo@superbaloo.net>
|
