| Age | Commit message (Collapse) | Author |
|---|
|
The approach that was taken here was to add default values to the type
definitions rather than specify them whenever they are missing.
Now the only remaining warning is '-Wunused-parameter' which @jade said
is usually counterproductive and that we can just disable it:
https://git.lix.systems/lix-project/lix/issues/456#issuecomment-6617
So this change adds the flags '-Wall', '-Wextra' and
'-Wno-unused-parameter', so that all warnings are enabled except for
'-Wunused-parameter'.
Change-Id: Ic223a964d67ab429e8da804c0721ba5e25d53012
|
|
derivation goals still hold a BuildResult member variable since parts of
these results of accumulated in different places, but the Goal class now
no longer has such a field. substitution goals don't need it at all, and
derivation goals should also be refactored to not drop their buildResult
Change-Id: Ic6d3d471cdbe790a6e09a43445e25bedec6ed446
|
|
there's no reason to have the worker set information on goals that the
goals themselves return from their entry point. doing this in the goal
`work()` function is much cleaner, and a prerequisite to removing more
implicit strong shared references to goals that are currently running.
Change-Id: Ibb3e953ab8482a6a21ce2ed659d5023a991e7923
|
|
this was a triumph. i'm making a note here: huge success. it's hard to
overstate my satisfaction! i'm not even angry. i'm being so sincere ri
actually, no. we *are* angry. this was one dumbass odyssey. nobody has
asked for this. but not doing it would have locked us into old, broken
protocols forever or (possibly worse) forced us to write our own async
framework building on the old did-you-mean-continuations in Worker. if
we had done that we'd be locked into ever more, and ever more complex,
manual state management all over the place. this just could not stand.
Change-Id: I43a6de1035febff59d2eff83be9ad52af4659871
|
|
due to event loop scheduling behavior it's possible for a derivation
goal to fully finish (having seen all paths it was asked to create),
but to not notify the worker of this in time to prevent another goal
asking the recently-finished goal for more outputs. if this happened
the finished goal would ignore the request for more outputs since it
considered itself fully done, and the delayed result reporting would
cause the requesting goal to assume its request had been honored. if
the requested goal had finished *properly* the worker would recreate
it instead of asking for more outputs, and this would succeed. it is
thus safe to always recreate goals once they are done, so we now do.
Change-Id: Ifedd69ca153372c623abe9a9b49cd1523588814f
|
|
Change-Id: Ic2f7bc2bd6a1879ad614e4be81a7214f64eb0e85
|
|
this was a debugging aid from day one that should not have any impact on
build semantics, and if it *does* have an impact on build semantics then
build semantics are seriously broken. keeping the order imposed by these
keys will be impossible once we let a real event loop schedule our jobs.
Change-Id: I5c313324e1f213ab6453d82f41ae5e59de809a5b
|
|
have DerivationGoal and its subclasses produce a wrapper promise for
their intermediate results instead, and return this wrapper promise.
Worker already handles promises that do not complete immediately, so
we do not have to duplicate this into an entire result type variant.
Change-Id: Iae8dbf63cfc742afda4d415922a29ac5a3f39348
|
|
now that we have an event loop in the worker we can use it and its
magical execution suspending properties to replace the slot counts
we managed explicitly with semaphores and raii tokens. technically
this would not have needed an event loop base to be doable, but it
is a whole lot easier to wait for a token to be available if there
is a callback mechanism ready for use that doesn't require a whole
damn dedicated abstract method in Goal to work, and specific calls
to that dedicated method strewn all over the worker implementation
Change-Id: I1da7cf386d94e2bbf2dba9b53ff51dbce6a0cff7
|
|
this removes the rather janky did-you-mean-async poll loop we had so
far. sadly kj does not play well with pty file descriptors, so we do
have to add our own async input stream that does not eat pty EIO and
turns it into an exception. that's still a *lot* better than the old
code, and using a real even loop makes everything else easier later.
Change-Id: Idd7e0428c59758602cc530bcad224cd2fed4c15e
|
|
using a proper event loop basis we no longer have to worry about most of
the intricacies of poll(), or platform-dependent replacements for it. we
may even be able to use the event loop and its promise system for all of
our scheduling in the future. we don't do any real async processing yet,
this is just preparation to separate the first such change from the huge
api design difference with the async framework we chose (kj from capnp):
kj::Promise, unlike std::future, doesn't return exceptions unmangled. it
instead wraps any non-kj exception into a kj exception, erasing all type
information and preserving mostly the what() string in the process. this
makes sense in the capnp rpc use case where unrestricted exception types
can't be transferred, and since it moves error handling styles closer to
a world we'd actually like there's no harm in doing it only here for now
Change-Id: I20f888de74d525fb2db36ca30ebba4bcfe9cc838
|
|
updating statistics *immediately* when any counter changes declutters
things somewhat and makes useful status reports less dependent on the
current worker main loop. using callbacks will make it easier to move
the worker loop into kj entirely, using only promises for scheduling.
Change-Id: I695dfa83111b1ec09b1a54cff268f3c1d7743ed6
|
|
whether goal errors are reported via the `ex` member or just printed to
the log depends on whether the goal is a toplevel goal or a dependency.
if goals are aware of this themselves we can move error printing out of
the worker loop, and since a running worker can only be used by running
goals it's totally sufficient to keep a `Worker::running` flag for this
Change-Id: I6b5cbe6eccee1afa5fde80653c4b968554ddd16f
|
|
this can be a proper WorkResult now. childTerminated is unfortunately a
lot more stubborn and won't be made private for quite a while yet. once
we can get rid of the Worker poll loop that *should* be possible though
Change-Id: I2218df202da5cb84e852f6a37e4c20367495b617
|
|
we'll need this once we want to pass extra information out of accepting
replies, such as fd sets or possibly even async output reader promises.
Change-Id: I5e2f18cdb80b0d2faf3067703cc18bd263329b3f
|
|
all derivation goals need a log fd of some description. let's save this
single fd in a dedicated pointer field for all subclasses so that later
we have just the one spot to change if we turn this into async promises
Change-Id: If223adf90909247363fb823d751cae34d25d0c0b
|
|
we don't need to expose information about how busy a Worker is if the
worker can instead tell its work items whether they are in a slot. in
the future we might use this to not start items waiting for a slot if
no slots are currently available, but that requires more preparation.
Change-Id: Ibe01ac536da7e6d6f80520164117c43e772f9bd9
|
|
Change-Id: I16ec8994c6448d70b686a2e4c10f19d4e240750d
|
|
this begins a long and arduous journey to remove all result state from
Goal, to eventually drop the std::enable_shared_from_this base, and to
completely eliminate all unsynchronized modification of states of both
Goal and Worker. by the end of this we will hopefully be able to start
and reap multiple derivation builds in parallel, which should speed up
the process quite a bit (at least for short local builds, others might
not notice a large difference. the build hooks will remain a problem.)
Change-Id: I57dcd9b2cab4636ed4aa24cdec67124fef883345
|
|
this is the first step towards removing all result-related mutation of
Goal state from goal implementations themselves, and into Worker state
instead. once that is done we can treat all non-const Goal fields like
private state of the goal itself, and make threading of goals possible
Change-Id: I69ff7d02a6fd91a65887c6640bfc4f5fb785b45c
|
|
This does involve making a large number of destructors able to throw,
because we had to change it high in the class hierarchy. Oh well.
Change-Id: Ib62d3d6895b755f20322bb8acc9bf43daf0174b2
|
|
This reverts commit 5e3986f59cb58f48186a49dcec7aa317b4787522. This
un-implements RFC 92 but fixes the critical bug #9052 which many people
are hitting. This is a decent stop-gap until a minimal reproduction of
that bug is found and a proper fix can be made.
Mostly fixed #9052, but I would like to leave that issue open until we
have a regression test, so I can then properly fix the bug (unbreaking
RFC 92) later.
(cherry picked from commit 8440afbed756254784d9fea3eaab06649dffd390)
|
|
To avoid dealing with an optional `drvPath` (because we might not know
it yet) everywhere, make an `CreateDerivationAndRealiseGoal`. This goal
just builds/substitutes the derivation file, and then kicks of a build
for that obtained derivation; in other words it does the chaining of
goals when the drv file is missing (as can already be the case) or
computed (new case).
This also means the `getDerivation` state can be removed from
`DerivationGoal`, which makes the `BasicDerivation` / in memory case and
`Derivation` / drv file file case closer together.
The map type is factored out for clarity, and because we will soon hvae
a second use for it (`Derivation` itself).
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
|
|
Types converted:
- `NixStringContextElem`
- `OutputsSpec`
- `ExtendedOutputsSpec`
- `DerivationOutput`
- `DerivationType`
Existing ones mostly conforming the pattern cleaned up:
- `ContentAddressMethod`
- `ContentAddressWithReferences`
The `DerivationGoal::derivationType` field had a bogus initialization,
now caught, so I made it `std::optional`. I think #8829 can make it
non-optional again because it will ensure we always have the derivation
when we construct a `DerivationGoal`.
See that issue (#7479) for details on the general goal.
`git grep 'Raw::Raw'` indicates the two types I didn't yet convert
`DerivedPath` and `BuiltPath` (and their `Single` variants) . This is
because @roberth and I (can't find issue right now...) plan on reworking
them somewhat, so I didn't want to churn them more just yet.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
|
|
`max-substitution-jobs` setting
|
|
|
|
|
|
In many cases we are dealing with a collection of realisations, they are
all outputs of the same derivation. In that case, we don't need
"derivation hashes modulos" to be part of our map key, because the
output names alone will be unique. Those hashes are still part of the
realisation proper, so we aren't loosing any information, we're just
"normalizing our schema" by narrowing the "primary key".
Besides making our data model a bit "tighter" this allows us to avoid a
double `for` loop in `DerivationGoal::waiteeDone`. The inner `for` loop
was previously just to select the output we cared about without knowing
its hash. Now we can just select the output by name directly.
Note that neither protocol is changed as part of this: we are still
transferring `DrvOutputs` over the wire for `BuildResult`s. I would only
consider revising this once #6223 is merged, and we can mention protocol
versions inside factored-out serialization logic. Until then it is
better not change anything because it would come a the cost of code
reuse.
|
|
If my memory is correct, @edolstra objected to modifying `wantedOutputs`
upon falling back to doing a build (as we did before), because we should
only modify it in response to new requests --- *actual* wants --- and
not because we are "incidentally" building all the outptus beyond what
may have been requested.
That's a fair point, and the alternative is to replace the boolean soup
with proper enums: Instead of modifying `wantedOuputs` som more, we'll
modify `needsRestart` to indicate we are passed the need.
|
|
* Finish converting existing comments for internal API docs
99% of this was just reformatting existing comments. Only two exceptions:
- Expanded upon `BuildResult::status` compat note
- Split up file-level `symbol-table.hh` doc comments to get
per-definition docs
Also fixed a few whitespace goofs, turning leading tabs to spaces and
removing trailing spaces.
Picking up from #8133
* Fix two things from comments
* Use triple-backtick not indent for `dumpPath`
* Convert GNU-style `\`..'` quotes to markdown style in API docs
This will render correctly.
|
|
`///@file` makes them show up in the internal API dos. A tiny few were
missing `#pragma once`.
|
|
`DerivedPath::Built` and `DerivationGoal` were previously using a
regular set with the convention that the empty set means all outputs.
But it is easy to forget about this rule when processing those sets.
Using `OutputSpec` forces us to get it right.
|
|
These only functioned if a very narrow combination of conditions held:
- The result path does not yet exist (--check did not result in
repeated builds), AND
- The result path is not available from any configured substituters, AND
- No remote builders that can build the path are available.
If any of these do not hold, a derivation would be built 0 or 1 times
regardless of the repeat option. Thus, remove it to avoid confusion.
|
|
Impure derivations are derivations that can produce a different result
every time they're built. Example:
stdenv.mkDerivation {
name = "impure";
__impure = true; # marks this derivation as impure
outputHashAlgo = "sha256";
outputHashMode = "recursive";
buildCommand = "date > $out";
};
Some important characteristics:
* This requires the 'impure-derivations' experimental feature.
* Impure derivations are not "cached". Thus, running "nix-build" on
the example above multiple times will cause a rebuild every time.
* They are implemented similar to CA derivations, i.e. the output is
moved to a content-addressed path in the store. The difference is
that we don't register a realisation in the Nix database.
* Pure derivations are not allowed to depend on impure derivations. In
the future fixed-output derivations will be allowed to depend on
impure derivations, thus forming an "impurity barrier" in the
dependency graph.
* When sandboxing is enabled, impure derivations can access the
network in the same way as fixed-output derivations. In relaxed
sandboxing mode, they can access the local filesystem.
|
|
This avoids an infinite loop in the final test in
tests/binary-cache.sh. I think this was only not triggered previously
by accident (because we were clearing wantedOutputs in between).
|
|
This function is like buildPaths(), except that it returns a vector of
BuildResults containing the exact statuses and output paths of each
derivation / substitution. This is convenient for functions like
Installable::build(), because they then don't need to do another
series of calls to get the outputs of CA derivations. It's also a
precondition to impure derivations, where we *can't* query the output
of those derivations since they're not stored in the Nix database.
Note that PathSubstitutionGoal can now also return a BuildStatus.
|
|
Just like we did for `ValidPathInfo` in
d92d4f85a5c8a2a2385c084500a8b6bd54b54e6c.
|
|
Also use std::string_view in a few more places.
|
|
Make the build of unresolved derivations return the same status as the
resolved one, except in the case of an `AlreadyValid` in which case it
will return `ResolvesToAlreadyValid` to mean that the outputs of the unresolved
derivation weren’t known, but the resolved one is.
|
|
Don't let them inherit the signature from the parent one (because it
makes no sense to do so), but re-sign them after they have been built
|
|
This separates the scheduling logic (including simple hook pathway) from
the local-store needing code.
This should be the final split for now. I'm reasonably happy with how
it's turning out, even before I'm done moving code into
`local-derivation-goal`. Benefits:
1. This will help "witness" that the hook case is indeed a lot simpler,
and also compensate for the increased complexity that comes from
content-addressed derivation outputs.
2. It also moves us ever so slightly towards a world where we could use
off-the-shelf storage or sandboxing, since `local-derivation-goal`
would be gutted in those cases, but `derivation-goal` should remain
nearly the same.
The new `#if 0` in the new files will be deleted in the following
commit. I keep it here so if it turns out more stuff can be moved over,
it's easy to do so in a way that preserves ordering --- and thus
prevents conflicts.
N.B.
```sh
git diff HEAD^^ --color-moved --find-copies-harder --patience --stat
```
makes nicer output.
|
|
This field used to be a `BasicDerivation`, but this `BasicDerivation`
was downcasted to a `Derivation` when needed (implicitely or not), so we
might as well make it a full `Derivation` and upcast it when needed.
This also allows getting rid of a weird duplication in the way we
compute the static output hashes for the derivation. We had to
do it differently and in a different place depending on whether the
derivation was a full derivation or just a basic drv, but we can now do
it unconditionally on the full derivation.
Fix #4559
|
|
That way we
1. Don't have to recompute them several times
2. Can compute them in a place where we know the type of the parent
derivation, meaning that we don't need the casting dance we had before
|
|
Once a build is done, get back to the original derivation, and register
all the newly built outputs for this derivation.
This allows Nix to work properly with derivations that don't have all
their build inputs available − thus allowing garbage collection and
(once it's implemented) binary substitution
|
|
We need the missing path info to communicate the worker's remaining
goals to the progress bar.
|
|
|
|
|
