| Age | Commit message (Collapse) | Author |
|---|
|
Ref #359.
Change-Id: Ia45530ddee25fa9fc399ff10738bb0d8bbc8b221
|
|
There have been multiple setting types for paths that are supposed to be
canonicalised, depending on whether zero or one, one, or any number of paths is
to be specified. Naturally, they behaved in slightly different ways in the
code. Simplify things by unifying them and removing special behaviour (mainly
the "multiple paths type can coerce to boolean" thing).
Change-Id: I7c1ce95e9c8e1829a866fb37d679e167811e9705
|
|
Change-Id: I9fbd55a9d50464a56fe11cb42a06a206914150d8
|
|
Change-Id: Ifa783c2c65c06ddd1d0212016d5bfd07666ea91c
|
|
Part of #270, #271
Change-Id: I864d7340f26d3c0f9c45db7b6b545face38d8294
|
|
This:
- Consistently returns `nullptr` for a non-existent
store path, instead of a mix of `nullptr` and
throwing exceptions.
- If a store returns "bad" store paths in response
to a request (e.g. incorrect hash or name), don't
cache this result. This removes some duplication
of code at the cache-access layer of queryPathInfo()
checking this, and allows us to provide more
specific errors.
Part of #270.
Change-Id: I86612c6499b1a37ab872c712c2304d6a3ff19edb
|
|
Change-Id: Ic1f68e6af658e94ef7922841dd3ad4c69551ef56
|
|
Change-Id: Icf6af7935e8f139bef36b40ad475e973aa48855c
|
|
Change-Id: I8d74745c519518f163f51dfaa39063836f17599e
|
|
Change-Id: I4a328f46eaac3bb8b19ddc091306de83348be9cf
|
|
Change-Id: I23a156aaff5328f67ca16ccd85c0ea1711b21e35
|
|
This does involve making a large number of destructors able to throw,
because we had to change it high in the class hierarchy. Oh well.
Change-Id: Ib62d3d6895b755f20322bb8acc9bf43daf0174b2
|
|
Combine `AbstractPos`, `PosAdapter`, and `Pos`
(cherry picked from commit 113499d16fc87d53b73fb62fe6242154909756ed)
===
this is a bit cursed because originally it was based on InputAccessor
code that we don't have and moved/patched features we likewise don't
have (fetchToStore caching, all the individual accessors,
ContentAddressMethod). the commit is adjusted accordingly to
match (remove caching, ignore accessors, use FileIngestionMethod).
note that `state.rootPath . CanonPath == abs` and
computeStorePathForPath works relative to cwd, so the slight rewrite in
the moved fetchToStore is legal.
Change-Id: I05fd340c273f0bcc8ffabfebdc4a88b98083bce5
|
|
doc: fix machine-specific capabilities leaking
(cherry picked from commit dda0e34ecf16bb1c736d585414122a7e3587db70)
Change-Id: I3d07cc5039ee954b215a7a27caa3bf7359d92c26
|
|
Make `StoreConfig::getDefaultSystemFeatures` a static method
(cherry picked from commit 5a9513cdbae31ea5e6f6e7afa7b3c2e3a9a26474)
Change-Id: Ia9c0ae2b7de419bd60aea8bf905154b96c428276
|
|
obsidiansystems/floating-content-addressing-derivations-eval-store
Fix building CA derivations with and eval store
(cherry picked from commit dfc0cee7024a082d90a4f68296f55a82dfd52126)
Change-Id: I28feb5a36d4fe75f0ed3e3e2db6eb56b67d0f371
|
|
Give `Store::queryDerivationOutputMap` and `evalStore` argument
(cherry picked from commit 8cddda4f892cb42be43e9bd87aa0111572617e78)
Change-Id: I394e7e11c3f2e0cd3dbe0f48d757c14c09835e44
|
|
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
|
|
This is analogous to that for experimental settings and flags that we
have also added as of late.
|
|
This is because `StoreConfig` also uses it.
|
|
This makes it more useful. In general, the derivation will be in one
store, and the realisation info is in another.
This also helps us avoid duplication. See how `resolveDerivedPath` is
now simpler because it uses `queryPartialDerivationOutputMap`. In #8369
we get more flavors of derived path, and need more code to resolve them
all, and this problem only gets worse.
The fact that we need a new method to deal with the multiple dispatch is
unfortunate, but this generally relates to the fact that `Store` is a
sub-par interface, too bulky/unwieldy and conflating separate concerns.
Solving that is out of scope of this PR.
This is part of the RFC 92 work. See tracking issue #6316
|
|
Rather than doing `allowEmpty` as boolean, have separate types and use
`std::optional`. This makes it harder to forget the possibility of an
empty path.
The `build-hook` setting was categorized as a `PathSetting`, but
actually it was split into arguments. No good! Now, it is
`Setting<Strings>` which actually reflects what it means and how it is
used.
Because of the subtyping, we now also have support for
`Setting<std::optional<String>>` in general. I imagine this can be used
to clean up many more settings also.
|
|
Support `repairPath` on most stores.
|
|
In other words, use a plain `ContentAddress` not
`ContentAddressWithReferences` for `DerivationOutput::CAFixed`.
Supporting fixed output derivations with (fixed) references would be a
cool feature, but it is out of scope at this moment.
|
|
Shuffle `BuildResult` data definition, make state machine clearer, introduce `SingleDrvOutputs`
|
|
Introduce `StoreReferences` and `ContentAddressWithReferences`
|
|
In https://github.com/NixOS/nix/pull/6311#discussion_r834863823, I
realized since derivation goals' wanted outputs can "grow" due to
overlapping dependencies (See `DerivationGoal::addWantedOutputs`, called
by `Worker::makeDerivationGoalCommon`), the previous bug fix had an
unfortunate side effect of causing more pointless rebuilds.
In paticular, we have this situation:
1. Goal made from `DerivedPath::Built { foo, {a} }`.
2. Goal gives on on substituting, starts building.
3. Goal made from `DerivedPath::Built { foo, {b} }`, in fact is just
modified original goal.
4. Though the goal had gotten as far as building, so all outputs were
going to be produced, `addWantedOutputs` no longer knows that and so
the goal is flagged to be restarted.
This might sound far-fetched with input-addressed drvs, where we usually
basically have all our goals "planned out" before we start doing
anything, but with CA derivation goals and especially RFC 92, where *drv
resolution* means goals are created after some building is completed, it
is more likely to happen.
So the first thing to do was restore the clearing of `wantedOutputs` we
used to do, and then filter the outputs in `buildPathsWithResults` to
only get the ones we care about.
But fix also has its own side effect in that the `DerivedPath` in the
`BuildResult` in `DerivationGoal` cannot be trusted; it is merely the
*first* `DerivedPath` for which this goal was originally created.
To remedy this, I made `BuildResult` be like it was before, and instead
made `KeyedBuildResult` be a subclass wit the path. Only
`buildPathsWithResults` returns `KeyedBuildResult`s, everything else
just becomes like it was before, where the "key" is unambiguous from
context.
I think separating the "primary key" field(s) from the other fields is
good practical in general anyways. (I would like to do the same thing
for `ValidPathInfo`.) Among other things, it allows constructions like
`std::map<Key, ThingWithKey>` where doesn't contain duplicate keys and
just precludes the possibility of those duplicate keys being out of
sync.
We might leverage the above someday to overload `buildPathsWithResults`
to take a *set* of return a *map* per the above.
-----
Unfortunately, we need to avoid C++20 strictness on designated
initializers.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
No having that yet, maybe it would be better to not make
`KeyedBuildResult` a subclass to just avoid this.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
|
|
More progress on issue #5729
The method trivially generalizes to be store-implementation-agnostic, in
fact.
However, we force it to continue to be unimplemented with `RemoteStore`
and `LegacySSHStore` because the implementation we'd get via the
generalization is probably not the one users expect. This keeps our
hands untied to do it right going forward.
For more about the tension between the scheduler logic being
store-type-agnostic and remote stores doing their own scheduling, see
issues #5025 and #5056.
|
|
More progress on issue #5729.
Instead of having it by the default method in `Store` itself, have it be
the implementation in `DummyStore` and `LegacySSHStore`. Then just the
implementations which fail to provide the method pay the "penalty" of
dealing with the icky `unimplemented` function for non-compliance.
Combined with my other recent PRs, this finally makes `Store` have no
`unsupported` calls!
|
|
|
|
* Finish converting existing comments for internal API docs
99% of this was just reformatting existing comments. Only two exceptions:
- Expanded upon `BuildResult::status` compat note
- Split up file-level `symbol-table.hh` doc comments to get
per-definition docs
Also fixed a few whitespace goofs, turning leading tabs to spaces and
removing trailing spaces.
Picking up from #8133
* Fix two things from comments
* Use triple-backtick not indent for `dumpPath`
* Convert GNU-style `\`..'` quotes to markdown style in API docs
This will render correctly.
|
|
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
|
|
The code is not local-store-specific, so we should share it with all
stores. More uniform behavior is better, and a less store-specific
functionality is more maintainable.
This fixes a FIXME added in f73d911628 by @edolstra himself.
|
|
`///@file` makes them show up in the internal API dos. A tiny few were
missing `#pragma once`.
|
|
Also improve content-address.hh API docs.
|
|
The internal API docs now contain more useful information.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
|
|
|
|
|
|
It is good to separate concerns; `StorePath` (in general) has nothing to
do with `ContentAddress` anyways.
This reduces the diff from #3746.
|
|
|
|
We don't need it yet, we can add it back later.
|
|
Rather than using `/nix/var/nix/{profiles,gcroots}/per-user/`, put the user
profiles and gcroots under `$XDG_DATA_DIR/nix/{profiles,gcroots}`.
This means that the daemon no longer needs to manage these paths itself
(they are fully handled client-side). In particular, it doesn’t have to
`chown` them anymore (removing one need for root).
This does change the layout of the gc-roots created by nix-env, and is
likely to break some stuff, so I’m not sure how to properly handle that.
|
|
|
|
`OutputSpec` for `DerivationGoal` and `DerivedPath`, today's `OutputSpec` -> `ExtendedOutputSpec`
|
|
Ca/fix nix log
|
|
`DerivedPath::Built` and `DerivationGoal` were previously using a
regular set with the convention that the empty set means all outputs.
But it is easy to forget about this rule when processing those sets.
Using `OutputSpec` forces us to get it right.
|
|
|
|
Fix #6209
When trying to run `nix log <installable>`, try first to resolve the derivation pointed to
by `<installable>` as it is the resolved one that holds the build log.
This has a couple of shortcomings:
1. It’s expensive as it requires re-reading the derivation
2. It’s brittle because if the derivation doesn’t exist anymore or can’t
be resolved (which is the case if any one of its build inputs is missing),
then we can’t access the log anymore
However, I don’t think we can do better (at least not right now).
The alternatives I see are:
1. Copy the build log for the un-resolved derivation. But that means a
lot of duplication
2. Store the results of the resolving in the db. Which might be the best
long-term solution, but leads to a whole new class of potential
issues.
|
|
|
|
|
