| Age | Commit message (Collapse) | Author |
|---|
|
Already, we had classes like `BuiltPathsCommand` and `StorePathsCommand`
which provided alternative `run` virtual functions providing the
implementation with more arguments. This was a very nice and easy way to
make writing command; just fill in the virtual functions and it is
fairly clear what to do.
However, exception to this pattern were `Installable{,s}Command`. These
two classes instead just had a field where the installables would be
stored, and various side-effecting `prepare` and `load` machinery too
fill them in. Command would wish out those fields.
This isn't so clear to use.
What this commit does is make those command classes like the others,
with richer `run` functions.
Not only does this restore the pattern making commands easier to write,
it has a number of other benefits:
- `prepare` and `load` are gone entirely! One command just hands just
hands off to the next.
- `useDefaultInstallables` because `defaultInstallables`. This takes
over `prepare` for the one case that needs it, and provides enough
flexiblity to handle `nix repl`'s idiosyncratic migration.
- We can use `ref` instead of `std::shared_ptr`. The former must be
initialized (so it is like Rust's `Box` rather than `Option<Box>`,
This expresses the invariant that the installable are in fact
initialized much better.
This is possible because since we just have local variables not
fields, we can stop worrying about the not-yet-initialized case.
- Fewer lines of code! (Finally I have a large refactor that makes the
number go down not up...)
- `nix repl` is now implemented in a clearer way.
The last item deserves further mention. `nix repl` is not like the other
installable commands because instead working from once-loaded
installables, it needs to be able to load them again and again.
To properly support this, we make a new superclass
`RawInstallablesCommand`. This class has the argument parsing and
completion logic, but does *not* hand off parsed installables but
instead just the raw string arguments.
This is exactly what `nix repl` needs, and allows us to instead of
having the logic awkwardly split between `prepare`,
`useDefaultInstallables,` and `load`, have everything right next to each
other. I think this will enable future simplifications of that argument
defaulting logic, but I am saving those for a future PR --- best to keep
code motion and more complicated boolean expression rewriting separate
steps.
The "diagnostic ignored `-Woverloaded-virtual`" pragma helps because C++
doesn't like our many `run` methods. In our case, we don't mind the
shadowing it all --- it is *intentional* that the derived class only
provides a `run` method, and doesn't call any of the overridden `run`
methods.
Helps with https://github.com/NixOS/rfcs/pull/134
|
|
|
|
bobvanderlinden/pr-improve-nix-profile-install-error
Improve error on conflict for nix profile install
|
|
|
|
Whenever a file conflict happens during "nix profile install" an error
is shown that was previously thrown inside builtins.buildEnv.
We catch BuildProfileConflictError here so that we can provide the user
with more useful instructions on what to do next.
Most notably, we give the user concrete commands to use with all
parameters already filled in. This avoids the need for the user to look
up these commands in manual pages.
|
|
|
|
Do this prior to making a new more limitted `OutputPath` we will use in
more places.
|
|
A few little changes preparing for the rest.
|
|
|
|
|
|
toDerivedPaths() now returns DerivedPathWithInfo, which is DerivedPath
with some attributes needed by 'nix profile' etc.
Preparation for #7417.
|
|
Example:
# nix build -L --extra-experimental-features cgroups --impure --expr 'with import <nixpkgs> {}; runCommand "foo" {} "dd if=/dev/urandom bs=1M count=1024 | md5sum; mkdir $out"' --json
[
{
"cpuSystem": 1.911431,
"cpuUser": 1.214249,
"drvPath": "/nix/store/xzdqz67xba18hljhycp0hwfigzrs2z69-foo.drv",
"outputs": {
"out": "/nix/store/rh9mc9l2gkpq8kn2sgzndr6ll7ffjh6l-foo"
},
"startTime": 1669024076,
"stopTime": 1669024079
}
]
|
|
|
|
|
|
|
|
|
|
|
|
E.g. 'nixpkgs#glibc^dev,static' or 'nixpkgs#glibc^*'.
|
|
|
|
|
|
Instead get the outputs from Installable::build(). This will also
allow 'nix profile install' to support impure derivations.
Fixes #6286.
|
|
Fixes #5872
|
|
This is useful whenever we want to evaluate something to a store path
(e.g. in get-drvs.cc).
Extracted from the lazy-trees branch (where we can require that a
store path must come from a store source tree accessor).
|
|
|
|
|
|
|
|
This is more consistent with flake terminology.
|
|
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
|
|
Followup of https://github.com/NixOS/nix/pull/6086. This time adding a
warning if no packages are upgraded.
|
|
This removes some duplicated logic, and fixes "nix bundle" parsing its
installable twice.
|
|
warn if there are no matches and give notice of removing packages as
they are found
|
|
These were needed back in the pre-C++11 era because we didn't have
move semantics. But now we do.
|
|
|
|
I had started the trend of doing `std::visit` by value (because a type
error once mislead me into thinking that was the only form that
existed). While the optomizer in principle should be able to deal with
extra coppying or extra indirection once the lambdas inlined, sticking
with by reference is the conventional default. I hope this might even
improve performance.
|
|
|
|
|
|
|
|
|
|
In particular, this now works:
$ nix path-info --eval-store auto --store https://cache.nixos.org nixpkgs#hello
Previously this would fail as it would try to upload the hello .drv to
cache.nixos.org. Now the .drv is instantiated in the local store, and
then we check for the existence of the outputs in cache.nixos.org.
|
|
Just a renaming for now
|
|
This was previously done in https://github.com/NixOS/nix/pull/4515 but
got clobbered away in https://github.com/NixOS/nix/pull/4594.
--------------------------------------------------------------------------------
This fixes an issue where derivations with a primary output that is
not "out" would fail with:
$ nix profile install nixpkgs#sqlite
error: opening directory '/nix/store/2a2ydlgyydly5czcc8lg12n6qqkfz863-sqlite-3.34.1-bin': No such file or directory
This happens because while derivations produce every output when
built, you might not have them if you didn't build the derivation
yourself (for instance, the store path was fetch from a binary cache).
This uses outputName provided from DerivationInfo which appears to
match the first output of the derivation.
|
|
This allows us to namespace its constructors under it.
|
|
|
|
This avoids an ambiguity where the `StorePathWithOutputs { drvPath, {}
}` could mean "build `brvPath`" or "substitute `drvPath`" depending on
context.
It also brings the internals closer in line to the new CLI, by
generalizing the `Buildable` type is used there and makes that
distinction already.
In doing so, relegate `StorePathWithOutputs` to being a type just for
backwards compatibility (CLI and RPC).
|
|
Fixes #3949.
|
|
This fixes an issue where derivations with a primary output that is
not "out" would fail with:
$ nix profile install nixpkgs#sqlite
error: opening directory '/nix/store/2a2ydlgyydly5czcc8lg12n6qqkfz863-sqlite-3.34.1-bin': No such file or directory
This happens because while derivations produce every output when
built, you might not have them if you didn't build the derivation
yourself (for instance, the store path was fetch from a binary cache).
This uses outputName provided from DerivationInfo which appears to
match the first output of the derivation.
|
|
Fixes #4458.
|
|
Replaces 'nix-env --list-generations'. Similar to 'nix profile
diff-closures' but shows only the changes in top-level packages.
|
|
|
|
|
