| Age | Commit message (Collapse) | Author |
|---|
|
Already, we had classes like `BuiltPathsCommand` and `StorePathsCommand`
which provided alternative `run` virtual functions providing the
implementation with more arguments. This was a very nice and easy way to
make writing command; just fill in the virtual functions and it is
fairly clear what to do.
However, exception to this pattern were `Installable{,s}Command`. These
two classes instead just had a field where the installables would be
stored, and various side-effecting `prepare` and `load` machinery too
fill them in. Command would wish out those fields.
This isn't so clear to use.
What this commit does is make those command classes like the others,
with richer `run` functions.
Not only does this restore the pattern making commands easier to write,
it has a number of other benefits:
- `prepare` and `load` are gone entirely! One command just hands just
hands off to the next.
- `useDefaultInstallables` because `defaultInstallables`. This takes
over `prepare` for the one case that needs it, and provides enough
flexiblity to handle `nix repl`'s idiosyncratic migration.
- We can use `ref` instead of `std::shared_ptr`. The former must be
initialized (so it is like Rust's `Box` rather than `Option<Box>`,
This expresses the invariant that the installable are in fact
initialized much better.
This is possible because since we just have local variables not
fields, we can stop worrying about the not-yet-initialized case.
- Fewer lines of code! (Finally I have a large refactor that makes the
number go down not up...)
- `nix repl` is now implemented in a clearer way.
The last item deserves further mention. `nix repl` is not like the other
installable commands because instead working from once-loaded
installables, it needs to be able to load them again and again.
To properly support this, we make a new superclass
`RawInstallablesCommand`. This class has the argument parsing and
completion logic, but does *not* hand off parsed installables but
instead just the raw string arguments.
This is exactly what `nix repl` needs, and allows us to instead of
having the logic awkwardly split between `prepare`,
`useDefaultInstallables,` and `load`, have everything right next to each
other. I think this will enable future simplifications of that argument
defaulting logic, but I am saving those for a future PR --- best to keep
code motion and more complicated boolean expression rewriting separate
steps.
The "diagnostic ignored `-Woverloaded-virtual`" pragma helps because C++
doesn't like our many `run` methods. In our case, we don't mind the
shadowing it all --- it is *intentional* that the derived class only
provides a `run` method, and doesn't call any of the overridden `run`
methods.
Helps with https://github.com/NixOS/rfcs/pull/134
|
|
|
|
|
|
|
|
Impure derivations are derivations that can produce a different result
every time they're built. Example:
stdenv.mkDerivation {
name = "impure";
__impure = true; # marks this derivation as impure
outputHashAlgo = "sha256";
outputHashMode = "recursive";
buildCommand = "date > $out";
};
Some important characteristics:
* This requires the 'impure-derivations' experimental feature.
* Impure derivations are not "cached". Thus, running "nix-build" on
the example above multiple times will cause a rebuild every time.
* They are implemented similar to CA derivations, i.e. the output is
moved to a content-addressed path in the store. The difference is
that we don't register a realisation in the Nix database.
* Pure derivations are not allowed to depend on impure derivations. In
the future fixed-output derivations will be allowed to depend on
impure derivations, thus forming an "impurity barrier" in the
dependency graph.
* When sandboxing is enabled, impure derivations can access the
network in the same way as fixed-output derivations. In relaxed
sandboxing mode, they can access the local filesystem.
|
|
1. `DerivationOutput` now as the `std::variant` as a base class. And the
variants are given hierarchical names under `DerivationOutput`.
In 8e0d0689be797f9e42f9b43b06f50c1af7f20b4a @matthewbauer and I
didn't know a better idiom, and so we made it a field. But this sort
of "newtype" is anoying for literals downstream.
Since then we leaned the base class, inherit the constructors trick,
e.g. used in `DerivedPath`. Switching to use that makes this more
ergonomic, and consistent.
2. `store-api.hh` and `derivations.hh` are now independent.
In bcde5456cc3295061a0726881c3e441444dd6680 I swapped the dependency,
but I now know it is better to just keep on using incomplete types as
much as possible for faster compilation and good separation of
concerns.
|
|
|
|
I had started the trend of doing `std::visit` by value (because a type
error once mislead me into thinking that was the only form that
existed). While the optomizer in principle should be able to deal with
extra coppying or extra indirection once the lambdas inlined, sticking
with by reference is the conventional default. I hope this might even
improve performance.
|
|
|
|
|
|
There is really no good reason to use "platform" except that that's
what we use internally (also for no good reason).
|
|
|
|
|
|
This was useful for an experiment with building Nix as a single
compilation unit. It's not very useful otherwise but also doesn't
hurt...
|
|
|
|
|
|
|
|
new-interface-for-path-pathOpt
|
|
|
|
|
|
github.com:obsidiansystems/nix into ca-derivation-data-types
|
|
optional-derivation-output-storepath
|
|
|
|
We've added the variant to `DerivationOutput` to support them, but made
`DerivationOutput::path` partial to avoid actually implementing them.
With this chage, we can all collaborate on "just" removing
`DerivationOutput::path` calls to implement CA derivations.
|
|
N.B. not using `std::visit` for fetchurl because there is no attempt to
handle all the cases (e.g. no `else`) and lambda complicates early
return.
|
|
we don’t need a full storepath for a fixedoutput derivation. So just
putting the ingestion method + the hash is sufficient.
|
|
no-stringly-typed-derivation-output
|
|
|
|
no-stringly-typed-derivation-output
|
|
|
|
|
|
It's best to detect invalid data as soon as possible, with data types
that make storing it impossible.
|
|
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.
Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.
Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
|
|
(cherry picked from commit a0de58f471c9087d8e6cc60a6078f9940a125b15)
|
|
This debug command prints a store derivation in JSON format. For
example:
$ nix show-derivation nixpkgs.hello
{
"/nix/store/ayjwpwwiyy04nh9z71rsdgd3q7bra7ch-hello-2.10.drv": {
"outputs": {
"out": {
"path": "/nix/store/w5w4v29ql0qwqhczkdxs94ix2lh7ibgs-hello-2.10"
}
},
"inputSrcs": [
"/nix/store/9krlzvny65gdc8s7kpb6lkx8cd02c25b-default-builder.sh"
],
"inputDrvs": {
"/nix/store/13839aqdf6x4k3b785rw5f2l7857l6y3-bash-4.4-p12.drv": [
"out"
],
"/nix/store/vgdx7fdc7d4iirmnwj2py1nrvr5qwzj7-hello-2.10.tar.gz.drv": [
"out"
],
"/nix/store/x3kkd0vsqfflbvwf1055l9mr39bg0ms0-stdenv.drv": [
"out"
]
},
"platform": "x86_64-linux",
"builder": "/nix/store/qp5fw57d38bd1n07ss4zxh88zg67c3vg-bash-4.4-p12/bin/bash",
"args": [
"-e",
"/nix/store/9krlzvny65gdc8s7kpb6lkx8cd02c25b-default-builder.sh"
],
"env": {
"buildInputs": "",
"builder": "/nix/store/qp5fw57d38bd1n07ss4zxh88zg67c3vg-bash-4.4-p12/bin/bash",
"configureFlags": "",
"doCheck": "1",
"name": "hello-2.10",
"nativeBuildInputs": "",
"out": "/nix/store/w5w4v29ql0qwqhczkdxs94ix2lh7ibgs-hello-2.10",
"propagatedBuildInputs": "",
"propagatedNativeBuildInputs": "",
"src": "/nix/store/3x7dwzq014bblazs7kq20p9hyzz0qh8g-hello-2.10.tar.gz",
"stdenv": "/nix/store/6zngq1rdh0ans9qyckqimqibgnlvlfrm-stdenv",
"system": "x86_64-linux"
}
}
}
This removes the need for pp-aterm.
|
