| Age | Commit message (Collapse) | Author |
|---|
|
Using `configure_file` to copy files has been deprecated since Meson 0.64.0.
The intended replacement is the `fs.copyfile` method.
This removes the following deprecation warning that arises when a minimum
Meson version is specified:
``
Project [...] uses feature deprecated since '0.64.0': copy arg in configure_file. Use fs.copyfile instead
``
Change-Id: I09ffc92e96311ef9ed594343a0a16d51e74b114a
|
|
* changes:
Fix passing custom CA files into the builtin:fetchurl sandbox
[security] builtin:fetchurl: Enable TLS verification
|
|
|
|
|
|
|
|
like kj::joinPromisesFailFast this allows waiting for the results of
multiple promises at once, but unlike it not all input promises must
be complete (or any of them failed) for results to become available.
Change-Id: I0e4a37e7bd90651d56b33d0bc5afbadc56cde70c
|
|
like a normal semaphore, but with awaitable acquire actions. this is
primarily intended as an intermediate concurrency limiting device in
the Worker code, but it may find other uses over time. we do not use
std::counting_semaphore as a base because the counter of that is not
inspectable as will be needed for Worker. we also do not need atomic
operations for cross-thread consistency since we don't have multiple
threads (thanks to kj event loops being confined to a single thread)
Change-Id: Ie2bcb107f3a2c0185138330f7cbba4cec6cbdd95
|
|
Without this, verifying TLS certificates would fail on macOS, as well
as any system that doesn't have a certificate file at /etc/ssl/certs/ca-certificates.crt,
which includes e.g. Fedora.
Change-Id: Iaa2e0e9db3747645b5482c82e3e0e4e8f229f5f9
|
|
This is better for privacy and to avoid leaking netrc credentials in a
MITM attack, but also the assumption that we check the hash no longer
holds in some cases (in particular for impure derivations).
Partially reverts https://github.com/NixOS/nix/commit/5db358d4d78aea7204a8f22c5bf2a309267ee038.
(cherry picked from commit c04bc17a5a0fdcb725a11ef6541f94730112e7b6)
(cherry picked from commit f2f47fa725fc87bfb536de171a2ea81f2789c9fb)
(cherry picked from commit 7b39cd631e0d3c3d238015c6f450c59bbc9cbc5b)
Upstream-PR: https://github.com/NixOS/nix/pull/11585
Change-Id: Ia973420f6098113da05a594d48394ce1fe41fbb9
|
|
Previously we would only crash the program for bad HintFmt calls.
nix::fmt should also crash.
Change-Id: I4ba0abeb8557b208bd9c0be624c022a60446ef7e
|
|
These stack traces kind of suck for the reasons mentioned on the
CppTrace page here (no symbols for inline functions is a major one):
https://github.com/jeremy-rifkin/cpptrace
I would consider using CppTrace if it were packaged, but to be honest, I
think that the more reasonable option is actually to move entirely to
out-of-process crash handling and symbolization.
The reason for this is that if you want to generate anything of
substance on SIGSEGV or really any deadly signal, you are stuck in
async-signal-safe land, which is not a place to be trying to run a
symbolizer. LLVM does it anyway, probably carefully, and chromium *can*
do it on debug builds but in general uses crashpad:
https://source.chromium.org/chromium/chromium/src/+/main:base/debug/stack_trace_posix.cc;l=974;drc=82dff63dbf9db05e9274e11d9128af7b9f51ceaa;bpv=1;bpt=1
However, some stack traces are better than *no* stack traces when we get
mystery exceptions falling out the bottom of the program. I've also
promoted the path for "mystery exceptions falling out the bottom of the
program" to hard crash and generate a core dump because although there's
been some months since the last one of these, these are nonetheless
always *atrociously* diagnosed.
We can't improve the crash handling further until either we use Crashpad
(which involves more C++ deps, no thanks) or we put in the ostensibly
work in progress Rust minidump infrastructure, in which case we need to
finish full support for Rust in libutil first.
Sample report:
Lix crashed. This is a bug. We would appreciate if you report it at https://git.lix.systems/lix-project/lix/issues with the following information included:
Exception: std::runtime_error: lol
Stack trace:
0# nix::printStackTrace() in /home/jade/lix/lix3/build/src/nix/../libutil/liblixutil.so
1# 0x000073C9862331F2 in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
2# 0x000073C985F2E21A in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
3# 0x000073C985F2E285 in /nix/store/p44qan69linp3ii0xrviypsw2j4qdcp2-gcc-13.2.0-lib/lib/libstdc++.so.6
4# nix::handleExceptions(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::function<void ()>) in /home/jade/lix/lix3/build/src/nix/../libmain/liblixmain.so
5# 0x00005CF65B6B048B in /home/jade/lix/lix3/build/src/nix/nix
6# 0x000073C985C8810E in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
7# __libc_start_main in /nix/store/dbcw19dshdwnxdv5q2g6wldj6syyvq7l-glibc-2.39-52/lib/libc.so.6
8# 0x00005CF65B610335 in /home/jade/lix/lix3/build/src/nix/nix
Change-Id: I1a9f6d349b617fd7145a37159b78ecb9382cb4e9
|
|
|
|
|
|
This caused an infinite loop before since it would just keep asking the
underlying source for more data.
In practice this happened because an HTTP server served a
response to a HEAD request (for which curl will not retrieve any body or
call our write callback function) with Content-Encoding: br, leading to
decompressing nothing at all and going into an infinite loop.
This adds a test to make sure none of our compression methods do that
again, as well as just patching the HTTP client to never feed empty data
into a compression algorithm (since they absolutely have the right to
throw CompressionError on unexpectedly-short streams!).
Reported on Matrix: https://matrix.to/#/!lymvtcwDJ7ZA9Npq:lix.systems/$8BWQR_zKxCQDJ40C5NnDo4bQPId3pZ_aoDj2ANP7Itc?via=lix.systems&via=matrix.org&via=tchncs.de
Change-Id: I027566e280f0f569fdb8df40e5ecbf46c211dad1
|
|
The legitimate output of `nix path-info` may visually interfere with the
progress bar, by appending to stale progress output before the latter has been
erased. Conveniently, all expensive operations (evaluation or building) have
already been performed before, so we can simply wipe the progress bar at this
point to fix the issue.
Fixes: https://git.lix.systems/lix-project/lix/issues/343
Change-Id: Id9a807a5c882295b3e6fbf841f9c15dc96f67f6e
|
|
|
|
Lix cannot be built with GNU readline, and we would "rather not" be GPL.
Change-Id: I0e86f0f10dab966ab1d1d467fb61fd2de50c00de
|
|
See https://git.lix.systems/lix-project/lix/issues/496.
The core idea is to be able to do e.g.
nix-instantiate -A some-nonfree-thing --arg config.allowUnfree true
which is currently not possible since `config.allowUnfree` is
interpreted as attribute name with a dot in it.
In order to change that (probably), Jade suggested to find out if there
are any folks out there relying on this behavior.
For such a use-case, it may still be possible to accept strings, i.e.
`--arg '"config.allowUnfree"'.
Change-Id: I986c73619fbd87a95b55e2f0ac03feaed3de2d2d
|
|
into main
|
|
* changes:
archive: refactor bad mutable-state API in the NAR parse listener
archive: rename ParseSink to NARParseVisitor
|
|
* Move the extended attribute deletion after the hardlink sanity check. We
shouldn't be removing extended attributes on random files.
* Make the entity owner-writable before attempting to remove extended
attributes, since this operation usually requires write access on the file,
and we shouldn't fail xattr deletion on a file that has been made unwritable
by the builder or a previous canonicalisation pass.
Fixes: https://git.lix.systems/lix-project/lix/issues/507
Change-Id: I7e6ccb71649185764cd5210f4a4794ee174afea6
|
|
This is not a detailed diagnosis, and it's not worth writing one, tbh.
This error basically never happens in normal operation, so diagnosing it
by changing the error on macOS is good enough.
Relevant: https://git.lix.systems/lix-project/lix-installer/issues/24
Relevant: https://git.lix.systems/lix-project/lix-installer/issues/18
Relevant: https://git.lix.systems/lix-project/lix/issues/521
Change-Id: I03701f917d116575c72a97502b8e1617679447f2
|
|
Remove the mutable state stuff that assumes that one file is being
written a time. It's true that we don't write multiple files
interleaved, but that mutable state is evil.
Change-Id: Ia1481da48255d901e4b09a9b783e7af44fae8cff
|
|
When generating shell completions, no logging output should be visible because
it would destroy the shell prompt. Originally this was attempted to be done by
simply disabling the progress bar (ca946860ce6ce5d4800b0d93d3f83c30d3c953c0),
since the situation is particularly bad there (the screen clearing required for
the rendering ends up erasing the shell prompt). Due to overlooking the
implementation of this hack, it was accidentally undone during a later change
(0dd1d8ca1cdccfc620644a7f690ed35bcd2d1e74).
Since even with the hack correctly in place, it is still possible to mess up
the prompt by logging output (for example warnings for disabled experimental
features, or messages generated by `builtins.trace`), simply send it to the bit
bucket where it belongs. This was already done for bash and zsh
(9d840758a8d195e52e8b7d08cd9c15f6b8259724), and it seems that fish was simply
missed at that time. The last trace of the no-longer-working and obsolete hack
is deleted too.
Fixes: https://git.lix.systems/lix-project/lix/issues/513
Change-Id: I59f1ebf90903034e2059298fa8d76bf970bc3315
|
|
- Rename the listener to not be called a "sink". If it were a "sink" it
would be eating bytes and conform with any of the Nix sink stuff
(maybe FileHandle should be a Sink itself! but that's a later CL's
problem). This is a parser listener.
- Move the RetrieveRegularNARSink thing into store-api.cc, which is its
only usage, and fix it to actually do what it is stated to do: crash
if its invariants are violated.
It's, of course, used to erm, unpack single-file NAR files, generated
via a horrible contraption of sources and sinks that looks like a
plumbing blueprint. Refactoring that is a future task.
- Add a description of the invariants of NARParseVisitor in preparation
of refactoring it.
Change-Id: Ifca1d74d2947204a1f66349772e54dad0743e944
|
|
|
|
|
|
* changes:
libfetchers: serialise accept-flake-config properly
libstore: declare SandboxMode JSON serialisation in the header
|
|
|
|
using a proper event loop basis we no longer have to worry about most of
the intricacies of poll(), or platform-dependent replacements for it. we
may even be able to use the event loop and its promise system for all of
our scheduling in the future. we don't do any real async processing yet,
this is just preparation to separate the first such change from the huge
api design difference with the async framework we chose (kj from capnp):
kj::Promise, unlike std::future, doesn't return exceptions unmangled. it
instead wraps any non-kj exception into a kj exception, erasing all type
information and preserving mostly the what() string in the process. this
makes sense in the capnp rpc use case where unrestricted exception types
can't be transferred, and since it moves error handling styles closer to
a world we'd actually like there's no harm in doing it only here for now
Change-Id: I20f888de74d525fb2db36ca30ebba4bcfe9cc838
|
|
we're using boost::outcome rather than leaf or stl types because stl
types are not available everywhere and leaf does not provide its own
storage for error values, relying on thread-locals and the stack. if
we want to use promises we won't have a stack and would have to wrap
everything into leaf-specific allocating wrappers, so outcome it is.
Change-Id: I35111a1f9ed517e7f12a839e2162b1ba6a993f8f
|
|
When the multi-line log format is enabled, the progress bar usually occupies
multiple lines on the screen. When stopping the progress bar, only the last
line was wiped, leaving all others visible on the screen. Erase all lines
belonging to the progress bar to prevent these leftovers.
Asking the user for input is theoretically affected by a similar issue, but
this is not observed in practice since the only place where the user is asked
(whether configuration options coming from flakes should be accepted) does not
actually have multiple lines on the progress bar. However, there is no real
reason to not fix this either, so let's do it anyway.
Change-Id: Iaa5a701874fca32e6f06d85912835d86b8fa7a16
|
|
|
|
|
|
The AcceptFlakeConfig type used was missing its JSON serialisation definition,
so it was incorrectly serialised as an integer, ending up that way for example
in the nix.conf manual page. Declare a proper serialisation.
Change-Id: If8ec210f9d4dd42fe480c4e97d0a4920eb66a01e
|
|
The JSON serialisation should be declared in the header so that all translation
units can see it when needed, even though it seems that it has not been used
anywhere else so far. Unfortunately, this means we cannot use the
NLOHMANN_JSON_SERIALIZE_ENUM convenience macro, since it uses a slightly
different signature, but the code is not too bad either.
Change-Id: I6e2851b250e0b53114d2fecb8011ff1ea9379d0f
|
|
This is the repl overlay from my dotfiles, which I think provides a
reasonable and ergonomic set of variables. We can iterate on this over
time, or (perhaps?) provide a sentinel value like `repl-overlays =
<DEFAULT>` to include a "suggested default" overlay like this one.
Change-Id: I8eba3934c50fbac8367111103e66c7375b8d134e
|
|
See: https://gerrit.lix.systems/c/lix/+/1864
Change-Id: Ic70bfe42b261a83f2cb68b8f102833b739b8e03a
|
|
Nuts!
Change-Id: Ib5bc0606d7c86e57ef76dd7bcc89dce91bd3d50a
|
|
* changes:
Support relative and `~/` paths in config settings
Thread `ApplyConfigOptions` through config parsing
|
|
it just makes sense to have it too, rather than just the pass/fail
information we keep so far. once we turn goals into something more
promise-shaped it'll also help detangle the current data flow mess
Change-Id: I915cf04d177cad849ea7a5833215d795326f1946
|
|
the more useful type for `result` is BuildResult.
Change-Id: If93d9384e8d686eb63b33320f1d565f9b9afbf3a
|
|
it doesn't have a purpose except cache priming, which is largely
irrelevant by default (since another code path already runs this
exact query). our store implementations do not benefit that much
from this either, and the more bursty load may indeed harm them.
Change-Id: I1cc12f8c21cede42524317736d5987f1e43fc9c9
|
|
updating statistics *immediately* when any counter changes declutters
things somewhat and makes useful status reports less dependent on the
current worker main loop. using callbacks will make it easier to move
the worker loop into kj entirely, using only promises for scheduling.
Change-Id: I695dfa83111b1ec09b1a54cff268f3c1d7743ed6
|
|
there's no reason to go through the event loop in these cases. returning
ContinueImmediately here is just a very convoluted way of jumping to the
state we've just set after unwinding one frame of the stack, which never
matters in the cases changed here because there are no live RAII guards.
Change-Id: I7c00948c22e3caf35e934c1a14ffd2d40efc5547
|
|
this is not ideal, but it's better than having this stuck in the worker
loop itself. setting ex on all failing goals is not problematic because
only toplevel goals can ever be observable, all the others are ignored.
notably only derivation goals ever set `ex`, substitution goals do not.
Change-Id: I02e2164487b2955df053fef3c8e774d557aa638a
|
|
this doesn't serve a great purpose yet except to confine construction of
goals to the stack frame of Worker::run() and its child frames. we don't
need this yet (and the goal constructors remain fully visible), but in a
future change that fully removes the current worker loop we'll need some
way of knowing which goals are top-level goals without passing the goals
themselves around. once that's possible we can remove visible goals as a
concept and rely on build result futures and a scheduler built upon them
Change-Id: Ia73cdeffcfb9ba1ce9d69b702dc0bc637a4c4ce6
|
|
whether goal errors are reported via the `ex` member or just printed to
the log depends on whether the goal is a toplevel goal or a dependency.
if goals are aware of this themselves we can move error printing out of
the worker loop, and since a running worker can only be used by running
goals it's totally sufficient to keep a `Worker::running` flag for this
Change-Id: I6b5cbe6eccee1afa5fde80653c4b968554ddd16f
|
|
Saves about 16s of CPU time. Not a lot but not nothing. Feels more like
the principle of the thing.
Change-Id: I0992d4024317c20d6985a7977d5649edfb9f46bb
|
|
This didn't really feel so worth it afterwards, but I did untangle a
bunch of stuff that should not have been tangled.
The general gist of this change is that variant bullshit was causing a
bunch of compile time, and it seems like the only way to deal with
variant induced compile time is to keep variant types out of headers.
Explicit template instantiation seems to do nothing for them.
I also seem to have gotten some back-end time improvement from
explicitly instantiating regex, but I don't know why. There is no
corresponding front-end time improvement from it: regex is still at the
top of the sinners list.
**** Templates that took longest to instantiate:
15231 ms: std::basic_regex<char>::_M_compile (28 times, avg 543 ms)
15066 ms: std::__detail::_Compiler<std::regex_traits<char>>::_Compiler (28 times, avg 538 ms)
12571 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_disjunction (28 times, avg 448 ms)
12454 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_alternative (28 times, avg 444 ms)
12225 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_term (28 times, avg 436 ms)
11363 ms: nlohmann::basic_json<>::parse<const char *> (21 times, avg 541 ms)
10628 ms: nlohmann::basic_json<>::basic_json (109 times, avg 97 ms)
10134 ms: std::__detail::_Compiler<std::regex_traits<char>>::_M_atom (28 times, avg 361 ms)
Back-end time before messing with the regex:
**** Function sets that took longest to compile / optimize:
8076 ms: void boost::io::detail::put<$>(boost::io::detail::put_holder<$> cons... (177 times, avg 45 ms)
4382 ms: std::_Rb_tree<$>::_M_erase(std::_Rb_tree_node<$>*) (1247 times, avg 3 ms)
3137 ms: boost::stacktrace::detail::to_string_impl_base<boost::stacktrace::de... (137 times, avg 22 ms)
2896 ms: void boost::io::detail::mk_str<$>(std::__cxx11::basic_string<$>&, ch... (177 times, avg 16 ms)
2304 ms: std::_Rb_tree<$>::_M_get_insert_hint_unique_pos(std::_Rb_tree_const_... (210 times, avg 10 ms)
2116 ms: bool std::__detail::_Compiler<$>::_M_expression_term<$>(std::__detai... (112 times, avg 18 ms)
2051 ms: std::_Rb_tree_iterator<$> std::_Rb_tree<$>::_M_emplace_hint_unique<$... (244 times, avg 8 ms)
2037 ms: toml::result<$> toml::detail::sequence<$>::invoke<$>(toml::detail::l... (93 times, avg 21 ms)
1928 ms: std::__detail::_Compiler<$>::_M_quantifier() (28 times, avg 68 ms)
1859 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump(nlohmann::js... (41 times, avg 45 ms)
1824 ms: std::_Function_handler<$>::_M_manager(std::_Any_data&, std::_Any_dat... (973 times, avg 1 ms)
1810 ms: std::__detail::_BracketMatcher<$>::_BracketMatcher(std::__detail::_B... (112 times, avg 16 ms)
1793 ms: nix::fetchers::GitInputScheme::fetch(nix::ref<$>, nix::fetchers::Inp... (1 times, avg 1793 ms)
1759 ms: std::_Rb_tree<$>::_M_get_insert_unique_pos(std::__cxx11::basic_strin... (281 times, avg 6 ms)
1722 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (19 times, avg 90 ms)
1677 ms: boost::io::basic_altstringbuf<$>::overflow(int) (194 times, avg 8 ms)
1674 ms: std::__cxx11::basic_string<$>::_M_mutate(unsigned long, unsigned lon... (249 times, avg 6 ms)
1660 ms: std::_Rb_tree_node<$>* std::_Rb_tree<$>::_M_copy<$>(std::_Rb_tree_no... (304 times, avg 5 ms)
1599 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (19 times, avg 84 ms)
1568 ms: void std::__detail::_Compiler<$>::_M_insert_bracket_matcher<$>(bool) (112 times, avg 14 ms)
1541 ms: std::__shared_ptr<$>::~__shared_ptr() (531 times, avg 2 ms)
1539 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump_escaped(std:... (41 times, avg 37 ms)
1471 ms: void std::__detail::_Compiler<$>::_M_insert_character_class_matcher<... (112 times, avg 13 ms)
After messing with the regex (notice std::__detail::_Compiler vanishes
here, but I don't know why):
**** Function sets that took longest to compile / optimize:
8054 ms: void boost::io::detail::put<$>(boost::io::detail::put_holder<$> cons... (177 times, avg 45 ms)
4313 ms: std::_Rb_tree<$>::_M_erase(std::_Rb_tree_node<$>*) (1217 times, avg 3 ms)
3259 ms: boost::stacktrace::detail::to_string_impl_base<boost::stacktrace::de... (137 times, avg 23 ms)
3045 ms: void boost::io::detail::mk_str<$>(std::__cxx11::basic_string<$>&, ch... (177 times, avg 17 ms)
2314 ms: std::_Rb_tree<$>::_M_get_insert_hint_unique_pos(std::_Rb_tree_const_... (207 times, avg 11 ms)
1923 ms: std::_Rb_tree_iterator<$> std::_Rb_tree<$>::_M_emplace_hint_unique<$... (216 times, avg 8 ms)
1817 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (18 times, avg 100 ms)
1816 ms: toml::result<$> toml::detail::sequence<$>::invoke<$>(toml::detail::l... (93 times, avg 19 ms)
1788 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump(nlohmann::js... (40 times, avg 44 ms)
1749 ms: std::_Rb_tree<$>::_M_get_insert_unique_pos(std::__cxx11::basic_strin... (278 times, avg 6 ms)
1724 ms: std::__cxx11::basic_string<$>::_M_mutate(unsigned long, unsigned lon... (248 times, avg 6 ms)
1697 ms: boost::io::basic_altstringbuf<$>::overflow(int) (194 times, avg 8 ms)
1684 ms: nix::fetchers::GitInputScheme::fetch(nix::ref<$>, nix::fetchers::Inp... (1 times, avg 1684 ms)
1680 ms: std::_Rb_tree_node<$>* std::_Rb_tree<$>::_M_copy<$>(std::_Rb_tree_no... (303 times, avg 5 ms)
1589 ms: bool nlohmann::json_abi_v3_11_3::detail::parser<$>::sax_parse_intern... (18 times, avg 88 ms)
1483 ms: non-virtual thunk to boost::wrapexcept<$>::~wrapexcept() (181 times, avg 8 ms)
1447 ms: nlohmann::json_abi_v3_11_3::detail::serializer<$>::dump_escaped(std:... (40 times, avg 36 ms)
1441 ms: std::__shared_ptr<$>::~__shared_ptr() (496 times, avg 2 ms)
1420 ms: boost::stacktrace::basic_stacktrace<$>::init(unsigned long, unsigned... (137 times, avg 10 ms)
1396 ms: boost::basic_format<$>::~basic_format() (194 times, avg 7 ms)
1290 ms: std::__cxx11::basic_string<$>::_M_replace_cold(char*, unsigned long,... (231 times, avg 5 ms)
1258 ms: std::vector<$>::~vector() (354 times, avg 3 ms)
1222 ms: std::__cxx11::basic_string<$>::_M_replace(unsigned long, unsigned lo... (231 times, avg 5 ms)
1194 ms: std::_Rb_tree<$>::_M_get_insert_hint_unique_pos(std::_Rb_tree_const_... (49 times, avg 24 ms)
1186 ms: bool tao::pegtl::internal::sor<$>::match<$>(std::integer_sequence<$>... (1 times, avg 1186 ms)
1149 ms: std::__detail::_Executor<$>::_M_dfs(std::__detail::_Executor<$>::_Ma... (70 times, avg 16 ms)
1123 ms: toml::detail::sequence<$>::invoke(toml::detail::location&) (69 times, avg 16 ms)
1110 ms: nlohmann::json_abi_v3_11_3::basic_json<$>::json_value::destroy(nlohm... (55 times, avg 20 ms)
1079 ms: std::_Function_handler<$>::_M_manager(std::_Any_data&, std::_Any_dat... (541 times, avg 1 ms)
1033 ms: nlohmann::json_abi_v3_11_3::detail::lexer<$>::scan_number() (20 times, avg 51 ms)
Change-Id: I10af282bcd4fc39c2d3caae3453e599e4639c70b
|
