| Age | Commit message (Collapse) | Author |
|---|
|
we still mutate goal state to store the results of any given goal run,
but now we also have that information in Worker and could in theory do
something else with it. we could return a map of goal to goal results,
which would also let us better diagnose failures of subgoals (at all).
Change-Id: I1df956bbd9fa8cc9485fb6df32918d68dda3ff48
|
|
this is the first step towards removing all result-related mutation of
Goal state from goal implementations themselves, and into Worker state
instead. once that is done we can treat all non-const Goal fields like
private state of the goal itself, and make threading of goals possible
Change-Id: I69ff7d02a6fd91a65887c6640bfc4f5fb785b45c
|
|
once goals run on multiple threads these fields must by synchronized as
one, or we try to run build hooks to often (or worse, not often enough)
Change-Id: I47860e46fe5c6db41755b2a3a1d9dbb5701c4ca4
|
|
this will usually be used either directly (which is always fine) or in
Finally blocks (where it must never throw execptions). make sure that,
exceptions being handled or not, the calling wait() in Finally doesn't
cause crashes due to the Finally no-nested-exceptions-thrown assertion
Change-Id: Ib83a5d9483b1fe83b9a957dcefeefce5d088f06d
|
|
|
|
consistent"" into main
|
|
The original attempt at this introduced a regression; this commit
reverts the revert and fixes the regression.
This reverts commit 3e151d4d77b5296b9da8c3ad209932d1dfa44c68.
Fix to the regression:
flakeref: fix handling of `?dir=` param for flakes in subdirs
As reported in #419[1], accessing a flake in a subdir of a Git
repository fails with the previous commit[2] applied with the error
error: unsupported Git input attribute 'dir'
The problem is that the `dir`-param is inserted into the parsed URL if a
flake is fetched from the subdir of a Git repository. However, for the
fetching part this isn't even needed. The fix is to just pass `subdir`
as second argument to `FlakeRef` (which needs a `basedir` that can be
empty) and leave the parsedURL as-is.
Added a regression test to make sure we don't run into this again.
[1] https://git.lix.systems/lix-project/lix/issues/419
[2] e22172aaf6b6a366cecd3c025590e68fa2b91bcc,
originally 3e151d4d77b5296b9da8c3ad209932d1dfa44c68
Change-Id: I2c72d5a32e406a7ca308e271730bd0af01c5d18b
|
|
* changes:
remove unused headers in installable-attr-path
libexpr: include the type of the non-derivation value in the type error
libexpr: mild cleanup to getDerivations
libexpr: DrvInfo: remove unused bad-citizen constructor
cleanup and slightly refactor DrvInfo::queryOutputs
|
|
* changes:
releng: move officialRelease to version.json
Add -Werror CI job
ci: add a asan+ubsan test run on x86_64-linux
tree-wide: add support for asan!
|
|
Change-Id: Icc4747aed195e3855b128c73df82e202405af6a8
|
|
Change-Id: Id4717b5b0df7c09b0dbf17e642d8713a0a3efbae
|
|
Shuffled the logic around a bit so the shorter code paths are early
returns, added comments, etc.
Should be NFC.
Change-Id: Ie3ddb3d0eddd614d6f8c37bf9a4d5a50282084ea
|
|
DrvInfo's constructor that only takes `EvalState` leaves everything else
empty; a DrvInfo which has no iota of information about the derivation
it represents is not useful, and was not used anywhere.
Change-Id: Ic4d93a08cb2748b8cef9a61e41e70404834b23f9
|
|
Change-Id: I00d9ff707fe61995737b86af6d2eaa1e4d8116ff
|
|
What if you could find memory bugs in Lix without really trying very
hard? I've had variously scuffed patches to do this, but this is
blocked on boost coroutines removal at this point tbh.
Change-Id: Id762af076aa06ad51e77a6c17ed10275929ed578
|
|
Change-Id: Iebc2bb4e4ea5e93045afe47677df756de4ec4d05
|
|
there are no other uses for this yet, but asking for just a subset of
outputs does seem at least somewhat useful to have as a generic thing
Change-Id: I30ff5055a666c351b1b086b8d05b9d7c9fb1c77a
|
|
|
|
If `:edit`ing a store path, don't reload repl afterwards
to avoid losing local variables: store is immutable,
so "editing" a store path is always just viewing it.
Resolves: https://git.lix.systems/lix-project/lix/issues/341
Change-Id: I3747f75ce26e0595e953069c39ddc3ee80699718
|
|
limiting CA substitutions was a rather recent addition, and it used a
dedicated counter to not interfere with regular substitutions. though
this works fine it somewhat contradicts the documentation; job limits
should apply to all kinds of substitutions, or be one limit for each.
Change-Id: I1505105b14260ecc1784039b2cc4b7afcf9115c8
|
|
all goals do this. it makes no sense to not notify a goal of EOF
conditions because this is the universal signal for "child done"
Change-Id: Ic3980de312547e616739c57c6248a8e81308b5ee
|
|
both substitution goals add only this single fd to their wait set.
Change-Id: Ibf921f5bb3919106208a0871523b32c8f67fb3d3
|
|
just update progress every time a goal has returned from work(). there
seem to be no performance penalties, and the code is much simpler now.
Change-Id: I288ee568b764ee61f40a498d986afda49987cb50
|
|
bindPath/doBind is a useful function in build that is used in several
parts of LocalDerivationGoal. Moving this function makes it easier to
split LocalDerivationGoal implementation between several files.
Change-Id: Ic5a0768479c153c1aa3ed425f12604b20bbf0f42
|
|
* changes:
libstore/build: block io_uring
libstore/build: use an allowlist approach to syscall filtering
libstore/build: always treat seccomp setup failures as fatal
|
|
|
|
* changes:
package.nix: remove dead code
diff-closures: remove gratuitous copy
tree-wide: NULL -> nullptr
libutil: rip out GNU Hurd support code
|
|
Unfortunately, io_uring is totally opaque to seccomp, and while currently there
are no dangerous operations implemented, there is no guarantee that it remains
this way. This means that io_uring should be blocked entirely to ensure that
the sandbox is future-proof. This has not been observed to cause issues in
practice.
Change-Id: I45d3895f95abe1bc103a63969f444c334dbbf50d
|
|
Previously, system call filtering (to prevent builders from storing files with
setuid/setgid permission bits or extended attributes) was performed using a
blocklist. While this looks simple at first, it actually carries significant
security and maintainability risks: after all, the kernel may add new syscalls
to achieve the same functionality one is trying to block, and it can even be
hard to actually add the syscall to the blocklist when building against a C
library that doesn't know about it yet. For a recent demonstration of this
happening in practice to Nix, see the introduction of fchmodat2 [0] [1].
The allowlist approach does not share the same drawback. While it does require
a rather large list of harmless syscalls to be maintained in the codebase,
failing to update this list (and roll out the update to all users) in time has
rather benign effects; at worst, very recent programs that already rely on new
syscalls will fail with an error the same way they would on a slightly older
kernel that doesn't support them yet. Most importantly, no unintended new ways
of performing dangerous operations will be silently allowed.
Another possible drawback is reduced system call performance due to the larger
filter created by the allowlist requiring more computation [2]. However, this
issue has not convincingly been demonstrated yet in practice, for example in
systemd or various browsers. To the contrary, it has been measured that the the
actual filter constructed here has approximately the same overhead as a very
simple filter blocking only one system call.
This commit tries to keep the behavior as close to unchanged as possible. The
system call list is in line with libseccomp 2.5.5 and glibc 2.39, which are the
latest versions at the point of writing. Since libseccomp 2.5.5 is already a
requirement and the distributions shipping this together with older versions of
glibc are mostly not a thing any more, this should not lead to more build
failures any more.
[0] https://github.com/NixOS/nixpkgs/issues/300635
[1] https://github.com/NixOS/nix/issues/10424
[2] https://github.com/flatpak/flatpak/pull/4462#issuecomment-1061690607
Change-Id: I541be3ea9b249bcceddfed6a5a13ac10b11e16ad
|
|
In f047e4357b4f7ad66c2e476506bf35cab82e441e, I missed the behavior that if
building without a dedicated build user (i.e. in single-user setups), seccomp
setup failures are silently ignored. This was introduced without explanation 7
years ago (ff6becafa8efc2f7e6f2b9b889ba4adf20b8d524). Hopefully the only
use-case nowadays is causing spurious test suite successes when messing up the
seccomp filter during development. Let's try removing it.
Change-Id: Ibe51416d9c7a6dd635c2282990224861adf1ceab
|
|
Musl stdout macro expands¹ to something that isn't a valid identifier,
so we get syntax errors when compiling usage of a method called stdout
with Musl's stdio.h.
[1]: https://git.musl-libc.org/cgit/musl/tree/include/stdio.h?id=ab31e9d6a0fa7c5c408856c89df2dfb12c344039#n67
Change-Id: I10e6f6a49504399bf8edd59c5d9e4e62449469e8
|
|
getSelfExe is used in a few places re-execute nix.
Current code in this file uses ifdefs to support several
platforms, just keep doing that
Change-Id: Iecc2ada0101aea0c30524e3a1218594f919d74bf
|
|
This was done originally because std::smatch does not accept `const char
*` as iterators. However, this was because we should have been using
std::cmatch instead.
Change-Id: Ibe73851fd39755e883df2d33d22fed72ac0a04ae
|
|
This is slightly more type safe and is more in line with modern C++.
Change-Id: Ia7a8df1c7788085020d1bdc941d6f9cee356144e
|
|
Nobody has stepped up to add further support for Hurd since this code
appeared in 2010 or 2014. We don't need it.
Change-Id: I400b2031a225551ea3c71a3ef3ea9fdb599dfba3
|
|
Use libprocstat to find garbage collector roots on FreeBSD.
Tested working on a FreeBSD machine, although there is no CI yet
Change-Id: Id36bac8c3de6cc4de94e2d76e9663dd4b76068a9
|
|
(cherry picked from commit 8cd1d02f90eb9915e640c5d370d919fad9833c65)
nix flake show: Only print up to the first new line if it exists.
(cherry picked from commit 5281a44927bdb51bfe6e5de12262d815c98f6fe7)
add tests
(cherry picked from commit 74ae0fbdc70a5079a527fe143c4832d1357011f7)
Handle long strings, embedded new lines and empty descriptions
(cherry picked from commit 2ca7b3afdbbd983173a17fa0a822cf7623601367)
Account for total length of 80
(cherry picked from commit 1cc808c18cbaaf26aaae42bb1d7f7223f25dd364)
docs: add nix flake show description release note
fix: remove white space
nix flake show: trim length based on terminal size
test: account for terminal size
docs(flake-description): before and after commands; add myself to credits
Upstream-PR: https://github.com/NixOS/nix/pull/10980
Change-Id: Ie1c667dc816b3dd81e65a1f5395e57ea48ee0362
|
|
|
|
Fixes: 72ee25b4025257fdaab7b8e8d5d1ccc83858fdab
Change-Id: Ib59386af1415a8ed4b53af24ec22a4ffa5e5877d
|
|
Error is pretty large, and most goals do not fail. this alone more than
halves the size of Goal on x86_64-linux, from 720 bytes down to 344. in
derived classes the difference is not as dramatic, but even the largest
derived class (`LocalDerivationGoal`) loses almost 20% of its footprint
Change-Id: Ifda8f94c81b6566eeb3e52d55d9796ec40c7bce8
|
|
Change-Id: I3c7f17d5492a16bb54480fa1aa384b96fba72d61
|
|
the goals are either already using std::async and merely forgot to
remove std::thread vestiges or they emulate async with threads and
promises. we can simply use async directly everywhere for clarity.
Change-Id: I3f05098310a25984f10fff1e68c573329002b500
|
|
under owner_less it's equivalent to insert(), only sometimes a little
bit faster because it does not construct a weak_ptr if the goal is in
the set already. this small difference in performance does not matter
here and c++23 will make insert transparent anyway, so we can drop it
Change-Id: I7cbd7d6e0daa95d67145ec58183162f6c4743b15
|
|
this should be an optional. "busy" is not an *exit* code!
Change-Id: Ic231cb27b022312b1a7a7b9602f32845b7a9c934
|
|
Change-Id: Ia3ebd434b17052b6760ce74d8e20025a72148613
|
|
*accidentally* overriding a function is almost guaranteed to be an
error. overriding a function without labeling it as such is merely
bad style, but bad style that makes the code harder to understand.
Change-Id: Ic0594f3d1604ab6b3c1a75cb5facc246effe45f0
|
|
Change-Id: Ib986ece0ab2eff83e7abd7f1f915cd8f761827ad
|
|
Commit 0109368c3faf5516aeddde45e8dc3c33e7163838 missed to include a required
header, which is not noticed when the precompiled header is enabled because
it's included in that. Also include it in the file so that the build without
precompiled header works too.
Change-Id: Id7a7979684b64f937f7f8191612952d73c113015
|
|
decompression" into main
|
|
it" into main
|
