| Age | Commit message (Collapse) | Author |
|---|
|
the parser treats a plain \r as a newline, error reports do not. this
can lead to interesting divergences if anything makes use of this
feature, with error reports pointing to wrong locations in the input (or
even outside the input altogether).
(cherry picked from commit 2be6b143289e5479cc4a2667bb84e879116c2447)
Change-Id: Ieb7f7655bac8cb0cf5734c60bd41723388f2973c
|
|
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
(cherry picked from commit 1edd6fada53553b89847ac3981ac28025857ca02)
Change-Id: I2f50eb9f3dc3977db4eb3e3da96f1cb37ccd5174
|
|
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
(cherry picked from commit 4147ecfb1c51f3fe3b4adcbd4e753fd487dab645)
Change-Id: I3fd0dbdef3ac7447a3a03ff20bb514a0d0f23fb1
|
|
the parser modifies its inputs, which means that sharing them between
the error context reporting system and the parser itself can confuse the
reporting system. usually this led to early truncation of error context
reports which, while not dangerous, can be quite confusing.
(cherry picked from commit d384ecd553aa997270b79ee98d02f7cf7e1849e6)
Change-Id: I677646b5675b12b2faa787943646aa36dc6e6ee3
|
|
diagnose attr duplication at the path the duplication was detected, not
at the path the current attribute wanted to place. doing the latter is
only correct if a leaf attribute was duplicated, not if an attrpath was
set to a non-attrset in one binding and a (potentially implied) attrset
in another binding.
fixes #124
Change-Id: Ic4aa9cc12a9874d4e7897c6f64408f10aa36fc82
|
|
It happens with some frequency that plugins that might be unimportant to
the evaluation at hand mismatch with the nix version, leading to
spurious load failures. Let's make these non fatal.
Change-Id: Iba10e951d171725ccf1a121bcd9be1e1d6ad69eb
|
|
Change-Id: I97c00b5eb1288f68d8c2b484436cc185d040b8b2
|
|
Change-Id: I8b2d8211a24011fae1586a1182d7d0772a039cd7
|
|
This is because they are unrepresentable in the source files with
commentary but not in the output, so we should just eat them in
normalization. It's ok.
Change-Id: I2cb7e8b3fc7b00874885bb287cbaa200b41cb16b
|
|
Change-Id: Ib0591e1499c5dba5e5a83ee75a899c9d16986827
|
|
This allows for automating using the repl without needing a PTY, with
very easy to write test files.
Change-Id: Ia8d7854edd91f93477638942cb6fc261354e6035
|
|
This parser can be reused for other purposes. It's inspired by
https://bitheap.org/cram/
Although eelco's impostor exists https://github.com/mobusoperandi/eelco,
it is not very nice to depend on out of tree testing frameworks with no
way to customize them.
Change-Id: Ifca50177e09730182baf0ebf829c3505bbb0274a
|
|
using the total-attrs-printed and total-list-items-printed counters to
calculate how many attrs were elided only works properly if no nesting
is involved. once things do nest the global counter can exceed the size
of the currently printed object, leading to unsigned wrapping and great
overestimation of elided counts. counting locally in addition to global
counts fixes this.
these are functional tests because creating these objects requires the
evaluator to not be a huge amount of code, and we also want defaults to
be tested for cli usage.
fixes #14
Change-Id: Icb9a0cb21b2f4bacbc5e9dcdd8c0b9055b4088a7
|
|
desugaring inherit-from to syntactic duplication of the source expr also
duplicates side effects of the source expr (such as trace calls) and
expensive computations (such as derivationStrict).
(cherry picked from commit cefd0302b55b3360dbca59cfcb4bf6a750d6cdcf)
Change-Id: Iff519f991adef2e51683ba2c552d37a3df7a179e
|
|
for plain inherits this is really just a stylistic choice, but for
inherit-from it actually fixes an exponential size increase problem
during expr printing (as may happen during assertion failure reporting,
on during duplicate attr detection in the parser)
(cherry picked from commit ecf8b12d60ad2929f9998666cf0966475b91e291)
Change-Id: Ie55f0cb01a37e766414c31f8d40f51c2c7d106b0
|
|
this also has the effect of sorting let bindings lexicographically
rather than by symbol creation order as was previously done, giving a
better canonicalization in the process.
(cherry picked from commit 6c08fba533ef31cad2bdc03ba72ecf58dc8ee5a0)
Change-Id: Ia887f629305645bb8a165fbbc0d32e620912595a
|
|
(cherry picked from commit 73065a400d176b21f518c1f4ece90c31318b218d)
Change-Id: I9356d8084d241a7904b66554d7c4194f8433edf7
|
|
(cherry picked from commit 8669c02468994887be91072ac58b1ee43380d354)
Change-Id: If8513316bf4b4b559c5bb63842c856f016816802
|
|
Do not skip any stack frames when `--show-trace` is given
(cherry picked from commit 0b47783d0a879875d558f0b56e49584f25ceb2d0)
Change-Id: Ia0f18266dbcf97543110110c655c219c7a3e3270
|
|
Pretty-print values in the REPL by printing each item in a list or
attrset on a separate line. When possible, single-item lists and
attrsets are printed on one line, as long as they don't contain a nested
list, attrset, or thunk.
Before:
```
{ attrs = { a = { b = { c = { }; }; }; }; list = [ 1 ]; list' = [ 1 2 3 ]; }
```
After:
```
{
attrs = {
a = {
b = {
c = { };
};
};
};
list = [ 1 ];
list' = [
1
2
3
];
}
```
(cherry picked from commit c0a15fb7d03dfb8f53bc6726c414bc88aa362592)
Change-Id: Ia2b41849165a5ddb63f7a8c272a2476b3e4292df
|
|
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
(cherry picked from commit c6a89c1a1659b31694c0fbcd21d78a6dd521c732)
Change-Id: Iced91ba4e00ca9e801518071fb43798936cbd05a
|
|
Fix cycle detection in `nix repl`
(cherry picked from commit e190c20c3394fd1a5cd9be1afc3f30ab32dcd36b)
Change-Id: Ie385e781b9f0b7171ca653bcd53a990bb41f9e4b
|
|
Print the value in `error: cannot coerce` messages
(cherry picked from commit 5b7bfd2d6b89d7dd5f54c1ca6c8072358d31a84e)
===
test taken from 6e8d5983143ae576e3f4b1d2954a5267f2943a49; it was added
previously (and not backported because its pr was a mostly-revert), but
it's useful to have around.
Change-Id: Icbd14b55e3610ce7b774667bf14b82e6dc717982
|
|
Print the value in `value is X while a Y is expected` error
(cherry picked from commit 5f72a97092da6af28a7d2b2a50d74e9d34fae7e1)
Change-Id: Idb4bc903ae59a0f5b6fb3b1da4d47970fe0a6efe
|
|
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
(cherry picked from commit 0fa08b451682fb3311fe58112ff05c4fe5bee3a4, )
===
Restore ambiguous value printer for `nix-instantiate`
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
(cherry picked from commit df84dd4d8dd3fd6381ac2ca3064432ab31a16b79)
Change-Id: I7cca6b4b53cd0642f2d49af657d5676a8554c9f8
|
|
Don't attempt to `git add` ignored files
(cherry picked from commit 359990dfdc713c80aabd7ea6f7e4528628fbe108)
===
also added a regression test that isn't upstream to be sure we're
actually fixing the bug.
Change-Id: I8267a3d0ece9909d8008b7435b90e7b3eee366f6
|
|
structured attrs: improve support / usage of NIX_ATTRS_{SH,JSON}_FILE
(cherry picked from commit 3c042f3b0b0a7ef9c47bf049f5410dbd4aac9e90)
Change-Id: I7e41838338ee1edf31fff6f9e354c3db2bba6c0e
|
|
LocalStore: :addTempRoot(): Handle ENOENT
(cherry picked from commit 7115edc85af060ef235ac0270245ab46cc828f7c)
Change-Id: Ie6b1596049c3fde09b98f2f0727899f98e48e6b1
|
|
Restore `builtins.pathExists` behavior on broken symlinks
(cherry picked from commit d53c8901ef7f2033855dd99063522e3d56a19dab)
===
note that this variant differs markedly from the source commit because
we haven't endured quite as much lazy trees.
Change-Id: I0facf282f21fe0db4134be5c65a8368c1b3a06fc
|
|
Test `nix copy --substitute-on-destination`
(cherry picked from commit ed93e51f4b0a8149521e3cf5b4f3ff4eabf5b060)
Change-Id: I33f8b591f42acf96fd18f27758dd1141b4bbbb5f
|
|
fix debugger crashing while printing envs
(cherry picked from commit 9b8b4860913afdb7f9cb1e1e81f9a9dd192cd1c1)
Change-Id: Ica6a17e4b3e3b8b8093719f442c28be7f13be09d
|
|
print-dev-env: Avoid using unbound shellHook variable
(cherry picked from commit 25385a408ef7281d966c8732608833e224b32586)
Change-Id: Id1aca13942adfa628f7bdcfc0b6fc03bb3bab9ea
|
|
Color `diff` output in `tests/functional/lang` tests
(cherry picked from commit 1dc55c0f2f034bce6e3de4a5cda96d686b10a7f8)
Change-Id: Ie9b3fc3446bd3caa0fd8885de88639516a2ff862
|
|
iFreilicht/disallow-nix-search-without-search-terms
nix search: Disallow empty regex
(cherry picked from commit 1c260fa6d1f47d83954792771d0614db163cc3bc)
Change-Id: Iaaf3605c24a342fcb05d0b534a9f305533d3b5fa
|
|
Use `nix daemon` in the test suite
(cherry picked from commit e6e160a0758c0354ed810b0ec9846ed885adcc11)
Change-Id: I537a25d3d48f609cd77b2c3a8ad68e87aebabfe8
|
|
tests/functional/lang: Test substring with negative length
(cherry picked from commit 86156d05dd33f856d8804f89669a7fe9b81f1a0d)
Change-Id: I2e2086027a43f8111ba5068ac16590eaa0b798d4
|
|
Fix performance of builtins.substring for empty substrings
(cherry picked from commit b2deff1947c2fe57fdbf1a472eb9003eb407f8d3)
Change-Id: I4ddfc8d26a4781c9520fff9807849a073ee7bed8
|
|
nix: develop: use SHELL from rc script
(cherry picked from commit 0d55d660d5ea081630aa9606b047eb755cff1528)
Change-Id: I83be6c63b282d7f01a0defa78d9e787c77f1f02d
|
|
nix shell: reflect command line order in PATH order
(cherry picked from commit b91c935c2faf08ced2c763dcd2a831f26d84fa86)
Change-Id: If16c120bb74857c2817366e74e5b0877eb997260
|
|
Improve error message for fixed-outputs with references.
(cherry picked from commit ff6de4a9ee6c3862db9ee5f09ff9c3f43ae7a088)
Change-Id: I733c49760b9a3f1b76a6bece3b250b8579cd6cac
|
|
Fix segfault on infinite recursion in some cases
(cherry picked from commit bf1b294bd81ca76c5ec9fe3ecd52196bf52a8300)
Change-Id: Id137541426ec8536567835953fccf986a3aebf16
|
|
Fix `logging.sh` test on macOS
(cherry picked from commit 94a03a810e948f65776c3386d9a5234db551dc9e)
Change-Id: I65dde18ee53ccded31790e0cf1f836c3ad6dc492
|
|
Remove some blank lines from stack traces
(cherry picked from commit cea83544362bd6426e9bc0b7dd0d611c19b0e3fd)
Change-Id: Ic1af8b09e9994d3c69fd3b37ae47a4bb786a15a1
|
|
Add eval-system option
(cherry picked from commit 071dbbee33af9f27338c3e53e4ea067dbfa14010)
Change-Id: Ia81358c8cfb60241da07a4d0e84b9ee62a18a53f
|
|
obsidiansystems/floating-content-addressing-derivations-eval-store
Fix building CA derivations with and eval store
(cherry picked from commit dfc0cee7024a082d90a4f68296f55a82dfd52126)
Change-Id: I28feb5a36d4fe75f0ed3e3e2db6eb56b67d0f371
|
|
Pass positions when evaluating
(cherry picked from commit c8458bd731eb1c74159bebe459ea00165e056b65)
Change-Id: I1b4a5d58973be6264ffdb23b4492da200fdb71be
|
|
tests: avoid a chroot store without sandbox support
(cherry picked from commit 5910140f252280f6be429d1cb5e91e69999f5b43)
Change-Id: Ic2255261334012f36a465a96073f50669952dc26
|
|
config: add included files into parsedContents before applying
(cherry picked from commit 82359eba6b692691ef08a71196ef25a61bc4d3d3)
Change-Id: Idde3177010fec7b8bafe6088c3c23d5caf491845
|
|
Use `buildprefix` in a few more places
(cherry picked from commit b6a3fde6b7a416929553e6be36fc991680ddf9ef)
Change-Id: I2790663fa9f8242ac2db6582b7e421d2fdf42942
|
|
`nix-env --query`: fix `--json` ignoring `--drv-path`
(cherry picked from commit 516e7ddc41f39ff939b5d5b5dc71e590f24890d4)
Change-Id: I84b5bccea9d0383e2e74544743b703942e7be547
|
